Fujitsu FI-6010N Operator's Manual page 593
Hide thumbs
Also See for FI-6010N:
- Operator's manual (665 pages) ,
- Setup manual (93 pages) ,
- Getting started manual (45 pages)
Table of Contents
Code
13060001
Scanner initialization has
failed. Try turning the power
1306001A
off and back on again. The
1306001D
administrator should contact the
FUJITSU scanner dealer or an
authorized FUJITSU scanner
service provider for help
1306002C
Insufficient memory. Try
turning the power off and back
on again. If problem persists,
the administrator should contact
the FUJITSU scanner dealer or
an authorized FUJITSU scanner
service provider for help.
1314002C
Insufficient memory. Try
turning the power off and back
on again. If problem persists,
the administrator should contact
the FUJITSU scanner dealer or
an authorized FUJITSU scanner
service provider for help.
13061001
Scan error occurred.
File name: XXXX
13061002
Error code: XXXX
13061003
Message
Try the following:
System might be unstable.
Shutdown and press the startup button to
restart the scanner.
If the error status persists, contact your
FUJITSU scanner dealer or an authorized
FUJITSU scanner service provider.
Reduce the size of the scan data or set a
lower resolution level, and try again.
Shutdown and press the startup button to
restart the scanner.If the error status
persists, contact your FUJITSU scanner
dealer or an authorized FUJITSU scanner
service provider.
fi-6010N Network Scanner Operator's Guide
Action
Check that the cables are connected to
the scanner properly.
If the scanner does not restart
automatically, press the [Shutdown]
button on the "Login" screen to turn the
power off, and turn the power back on
again to restart the scanner.
If the error status persists after the
scanner is restarted, press the
[Shutdown] button on the "Login"
screen, disconnect the AC cable and try
turning the power back on again. If the
error status persists, contact your
FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider.
E
557
Table of Contents
Troubleshooting
