Hide thumbs Also See for iScanner fi-6010N:
Table of Contents

Quick Links

Table of Contents
loading

Summary of Contents for Fujitsu iScanner fi-6010N

  • Page 3: Table Of Contents

    User Types and Operations ..........7 System Requirements ........... 11 1.4.1 Requirements for Admin Tool..........11 ■ Software ................. 11 ■ Hardware ................ 11 1.4.2 Requirements for Central Admin Console ......12 ■ Software ................. 12 ■ Hardware ................ 12 fi-6010N Network Scanner Operator's Guide...
  • Page 4 1.4.3 Requirements for Central Admin Server......13 ■ Software ................. 13 ■ Hardware ................ 13 1.4.4 Requirements for Related Servers ........14 ■ LDAP Server ..............15 ■ SMTP Server ..............15 ■ File Server ..............15 ■ FTP Server ..............15 ■...
  • Page 5 Setting the Time to Standby Mode ........61 4.6.7 Setting the Login Method ............ 63 4.6.8 Changing the Admin Password .......... 66 4.6.9 Setting a File Name Format ..........67 4.6.10 Setting the Multifeed Detection Method ......71 fi-6010N Network Scanner Operator's Guide...
  • Page 6 4.6.11 Setting Scanning Performance ........... 74 ■ Offset Settings ..............75 ■ Length Magnification Setting .......... 75 Using the Network Settings Menus ......76 4.7.1 Giving the Scanner an IP Address ........76 4.7.2 Setting the Admin Network ..........78 4.7.3 Setting a Central Admin Server ..........
  • Page 7 Updating the Scanner's System Software ......153 4.10.4 Installing/Uninstalling an Add-in Module ......155 ■ Installing an Add-in Module .......... 155 ■ Uninstalling an Add-in Module ........156 4.10.5 Setting the Information Output Level ........ 157 fi-6010N Network Scanner Operator's Guide...
  • Page 8 4.10.6 Obtaining Technical Support ..........158 4.11 Setting Job Features ........... 159 4.11.1 Job Setting Quick User Guide ........... 161 4.11.2 Setting a Job Sequence ........... 163 ■ Adding a job sequence ..........163 ■ Cloning a job sequence ..........171 ■...
  • Page 9 [Import Config] button ........... 222 ■ [Export Config] button ........... 223 ■ Filter Conditions ............223 ■ [New] button ..............224 ■ [Clone] button ............... 225 ■ [Edit] button ..............225 ■ [Delete] button .............. 225 fi-6010N Network Scanner Operator's Guide...
  • Page 10 ■ [Select All] button ............225 ■ [Deselect All] button ............. 226 ■ Scanner information list ..........226 ■ [Back] button ..............227 Updating the System ........... 228 ■ Registered System Update .......... 228 ■ Upload & Release a New System Update ....228 ■...
  • Page 11 Address Book ........... 269 6.4.2 Adding a Contact to the e-Mail Address Book....273 6.4.3 Editing a Contact in the e-Mail Address Book ....275 6.4.4 Deleting a Contact from the e-Mail Address Book..... 276 fi-6010N Network Scanner Operator's Guide...
  • Page 12 Sending the Scanned Data by Fax ......277 6.5.1 Selecting a Fax Number from the Fax Number List ..279 6.5.2 Adding a Contact to the Fax Number List......282 6.5.3 Editing a Contact in the Fax Number List ......284 6.5.4 Deleting a Contact from the Fax Number List ....
  • Page 13 Cleaning the Carrier Sheet ......... 366 Replacing Parts ............367 7.6.1 Part Numbers and Replacement Cycles ......367 ■ Part numbers and replacement cycle for consumable parts ............ 367 ■ Part numbers and replacement cycle for Carrier Sheet ............368 fi-6010N Network Scanner Operator's Guide...
  • Page 14 Failure to print on a network printer ......396 8.3.3 Failure to Access the Scanner using a Web Browser, Admin Tool, or Central Admin Server........ 397 Other Troubleshooting ..........400 Points to Check before Contacting Your FUJITSU Scanner Dealer ........404 8.5.1 General Details..............404...
  • Page 15 Appendix B Management Settings and Files ....419 e-Mail Address Setting Values ........420 Scanner Configuration File Format ......421 B.2.1 Scanner Configuration File Format (for Importing) .... 421 B.2.2 Scanner Configuration File Format (for Exporting).... 422 fi-6010N Network Scanner Operator's Guide xiii...
  • Page 16 Appendix C Root Certification Authority ......425 Root Certification Authority List ........ 426 Appendix D Scanner Specifications ........429 Device Specifications ..........430 Scanner Specifications ..........431 Appendix E Operation Messages ........433 Administrator Messages ..........434 E.1.1 Administrator Screen Messages........435 E.1.2 System Log Messages ............
  • Page 17 System Event Log ............512 ■ Central Admin Console Event Log ....... 514 E.3.4 Backup/Restore Command Messages ......517 ■ Information ..............517 ■ Error ................517 Appendix F Glossary ............521 Index ..................527 fi-6010N Network Scanner Operator's Guide...
  • Page 19: Copyright

    This product includes software developed by the University of California, Lawrence Berkeley Laboratory and its contributors. This product includes software developed by the Kungliga Tekniska Hogskolan and its contributors. This product includes software developed by Yen Yen Lim and North Dakota State University. fi-6010N Network Scanner Operator's Guide xvii...
  • Page 20 Portions Copyright© 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997 The Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
  • Page 21 THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, fi-6010N Network Scanner Operator's Guide...
  • Page 22 INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  • Page 23 Carnegie Mellon and Stanford University. Carnegie Mellon makes no representations about the suitability of this software for any purpose. It is provided "as is" without express or implied warranty. fi-6010N Network Scanner Operator's Guide...
  • Page 24 WinDump3.9.5 Copyright© 1999 - 2005 NetGroup, Politecnico di Torino (Italy). Copyright© 2005 - 2006 CACE Technologies, Davis (California). All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1.
  • Page 25: Introduction

    Introduction Thank you for purchasing the fi-6010N Network Scanner. This easy-to-use image scanner is designed to be connected to a computer network system and is primarily for office use. ■Manuals The following manuals are prepared for the scanner. Read them as needed.
  • Page 26: Regulatory Information

    Ministère des Communications du Canada. Cet appareil numérique de la classe B est conforme la norme NMB-003 du Canada. Bescheimigung des Herstellers / Importeurs Für den fi-6010N wird folgendes bescheinigt: • In Übereinsstimmung mit den Bestimmungen der EN45014(CE) funkentstört •...
  • Page 27 Please contact your maintenance engineer in charge when the battery runs low. • Do not touch the battery. Never install or remove the battery by yourself. Doing so may cause electric shock or static electricity which can damage the device. fi-6010N Network Scanner Operator's Guide...
  • Page 28: Trademarks

    About Maintenance The user must not perform repairs on this scanner. Contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider for repairs to this product. ■Trademarks Microsoft, Windows, and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other countries.
  • Page 29: Notice Of Liability

    ARNI N G observed, may result in severe injury or death. This indication alerts operators to an operation that, if not strictly AUTION observed, may result in safety hazards to personnel or damage to equipment. fi-6010N Network Scanner Operator's Guide xxvii...
  • Page 30: Symbols Used In This Manual

    Symbols Used in This Manual This manual uses the following symbols in the explanations in addition to the warning indications. This symbol alerts operators to particularly important information. Be ATTENTION sure to read this information. This symbol alerts operators to helpful advice regarding operation. HINT A TRIANGLE symbol indicates that special care and attention is required.
  • Page 31: Warning Label

    Use this scanner only at the indicated power voltage. Do not connect to multiple-power strips. Use this scanner only at the indicated power voltage and current. Improper power voltage and current might cause fire or electric shock. Do not connect to multiple-power strips. fi-6010N Network Scanner Operator's Guide xxix...
  • Page 32 Turn the scanner OFF if it is damaged. If the scanner is damaged for any reason, turn the scanner off and unplug the power cable. Contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Do not use the scanner if there is a strange odor.
  • Page 33 Do not use the scanner where it gets wet. Do not use the scanner at a place such as a bathroom, shower room, or swimming pool where it may easily get wet. Doing so might cause electric shock or fire. fi-6010N Network Scanner Operator's Guide xxxi...
  • Page 34 AUTION Do not install the scanner on unstable surfaces. Make sure that the scanner is installed on a flat, level surface and that none of its parts extend beyond the surface top, such as a desk or table. Do not install the scanner on unstable surfaces.
  • Page 35 Do not place the scanner in areas, which are subject to high levels of shock or vibration. Do not place the scanner in areas, which are subject to high levels of shock or vibration. Doing so may cause the scanner to malfunction. fi-6010N Network Scanner Operator's Guide xxxiii...
  • Page 36 xxxiv...
  • Page 37: Scanner Overview

    Chapter 1 Scanner Overview 1.1 Scanner Features ....................2 1.2 Part Names and Functions ..................4 1.3 User Types and Operations..................7 1.4 System Requirements................... 11 fi-6010N Network Scanner Operator's Guide...
  • Page 38: Scanner Features

    Scanner Features ■ Basic uses for scanned documents This easy-to-operate network scanner is used to scan documents for further use: 1. Scanned document files can be sent as an e-mail attachment. 2. Scanned document files can be sent by fax. 3.
  • Page 39: Configure And Manage With Ease

    This totally eliminates the possibility of access to any user data remaining in the freed disk space. In addition, input of files from external media or networks is not possible. Therefore, the scanner is protected against virus infection. fi-6010N Network Scanner Operator's Guide...
  • Page 40: Part Names And Functions

    Part Names and Functions 1.2.1 External Parts • Front view 6. ADF paper chute 7. Side guides 8. Top cover 1. Startup button 2. [SCAN] button 3. LCD touch panel 4. Keyboard 5. Output tray • Rear view 9. ADF release button nside the back cover 10.
  • Page 41 Cylindrical part: diameter 25mm (max), length 50mm (max) (includes bent part if a straight cable is used) AC adaptor connector Connects the scanner to the AC adaptor. LAN connector Connects the scanner to the network. fi-6010N Network Scanner Operator's Guide...
  • Page 42: Internal Parts

    1.2.2 Internal Parts Part name Function Pad assembly Help to guide documents from the ADF paper chute to the glass scanner windows. Pick roller Sheet guide Glass scanner win- Place where the documents are scanned. dows ADF (Automatic Doc- Drives the documents from the ADF paper chute, past the ument Feeder) glass scanner windows, to the output tray.
  • Page 43: User Types And Operations

    File Names Set the file name format — page 67 Multifeed Set- Set the multifeed detection — page 71 tings method Scanner Adjust- Set the offset and magnifi- — — page 74 ment cation settings fi-6010N Network Scanner Operator's Guide...
  • Page 44 Administrator Top Menu Tab Regular Used to ... See ... Touch Admin Central /Side Menu Tab User Panel Tool Admin Network Settings IP Address Set the IP address — — page 76 Admin Network Set the admin network A (*2) —...
  • Page 45 Save the scanned data to a — — — page 299 network folder Scan Settings Set the scan options — — — page 304 Scan Viewer Enable/disable the scan — — — page 340 viewer fi-6010N Network Scanner Operator's Guide...
  • Page 46 Administrator Top Menu Tab Regular Used to ... See ... Touch Admin Central /Side Menu Tab User Panel Tool Admin Maintenance Edit e-Mail Edit contacts in the e-mail — — — page 275 Addresses address book Edit Fax Num- Edit contacts in the fax page 284 —...
  • Page 47: System Requirements

    Any personal computer which runs the supported software 32MB or more of free memory space 64MB or more of free disk space • XGA monitor or better • LAN cable • Pointing device (e.g. mouse) fi-6010N Network Scanner Operator's Guide...
  • Page 48: Requirements For Central Admin Console

    1.4.2 Requirements for Central Admin Console For use of the Central Admin Console, the following requirements apply: ■ Software • Operating System • Windows® XP SP2 or later • Windows Vista® • Windows Server® 2003 SP2 or later • Windows Server® 2008 •...
  • Page 49: Requirements For Central Admin Server

    Any personal computer which runs the supported software Intel® Pentium® III processor, 1GHz and above, or equally interchangeable processor 512MB or more of free memory space 700MB or more of free disk space • XGA monitor or better • LAN cable fi-6010N Network Scanner Operator's Guide...
  • Page 50: Requirements For Related Servers

    1.4.4 Requirements for Related Servers For related servers, the following requirements apply: Server Operating system Required Function LDAP Server Windows® 2000 Server (*1) Active Directory Windows Server® 2003 (*2) Active Directory Windows Server® 2008 (*3) Active Directory SMTP Server Windows® 2000 Server (*1) SMTP Windows Server®...
  • Page 51: Ldap Server

    The FTP (File Transfer Protocol) is a protocol for transmitting files. An FTP server which connects with SSL encryption is called an "FTPS Server". Using this FTP server enables a scanned image to be saved to an FTP server network folder. fi-6010N Network Scanner Operator's Guide...
  • Page 52: Print Server

    ■ Print Server The print server is used to print the scanned data. Printers to be used are set on the print server. • Windows® XP compatible printer drivers must be registered. • ATTENTION Printer must be able to spool print jobs (to hard disk or memory). Contact your printer dealer if uncertain whether your printer has a spool function.
  • Page 53: Network Requirements

    If the number of scanners exceeds 1,000, multiple Central Admin Servers will be prepared. The target scanners for each server should not exceed 1,000. fi-6010N Network Scanner Operator's Guide...
  • Page 54: Port Number List

    1.4.7 Port Number List Protocol Function From/To Port Number Number Admin Tool ⇒ Scanner Admin Tool Connection 80 (HTTP) (*1) 6 (TCP) 443 (HTTPS) (*1) 6 (TCP) Central Admin Server Central Admin Server 80 (HTTP) (*1) 6 (TCP) ⇒ Scanner Connection 443 (HTTPS) (*1) 6 (TCP)
  • Page 55 989,990 (FTPS) (*1) 6 (TCP) Scanner ⇒ File server Saving to a Folder 137,138,139,445 (SMB) 6 (TCP) 17 (UDP) Scanner ⇒ Ping — 1 (ICMP) Another personal computer or server (*1): Changing the Port Number is possible fi-6010N Network Scanner Operator's Guide...
  • Page 57: Basic Scanner Operations

    Chapter 2 Basic Scanner Operations 2.1 Using the Scanner Buttons .................. 22 2.2 Using the LCD Touch Panel ................. 24 2.3 Using the Keyboard ....................25 fi-6010N Network Scanner Operator's Guide...
  • Page 58: Using The Scanner Buttons

    Using the Scanner Buttons 2.1.1 Using the Startup Button When the scanner is off or in standby mode, pressing the startup button will start the scanner up and display the login screen. Operating LED Lit Shutdown Login Screen LED Dark Login Press Button Operation Screens...
  • Page 59: Using The Top Cover [Scan] Button

    [Scan] button or top cover [SCAN] button may be pressed to start the scan. [SCAN] button (top cover) The touch panel [Scan] button may appear as follows: • [Scan] • [Scan & Send] • [Scan & Print] • [Scan & Save] • [Scan More] fi-6010N Network Scanner Operator's Guide...
  • Page 60: Using The Lcd Touch Panel

    Using the LCD Touch Panel When using the LCD touch panel, buttons only need to be lightly pressed to select them. For details how to operate the touch panel, refer to "4.1 Administrator Screens via the Touch Panel" (page 32) "6.2 Using Touch Panel Screens: Regular User"...
  • Page 61: Using The Keyboard

    The keyboard cannot be used to select a top or left side menu button. Select buttons in the top menu by pressing the touch panel, or by using the ATTENTION mouse via the network interface. fi-6010N Network Scanner Operator's Guide...
  • Page 62: Using The Keyboard: Regular Users

    2.3.2 Using the Keyboard: Regular Users Used to ... Switch focus to the next field or button. Space Select the button in focus. Enter Set the contents of the current screen. (Used instead of the [OK] button or [Login] button.) (On Search screens, may be used instead of the [Find] button.) Return to the previous screen.
  • Page 63: Administrator Operations (Overview)

    Chapter 3 Administrator Operations (Overview) 3.1 Operating and Managing Scanners..............28 3.2 Required Scanner Function Settings ..............29 fi-6010N Network Scanner Operator's Guide...
  • Page 64: Operating And Managing Scanners

    Operating and Managing Scanners Scanner settings management can be implemented in the following ways. • LCD Touch Panel Scanner settings management can be implemented directly via the scanner's touch panel. • Admin Tool Scanner settings management, and updates can be implemented via the network interface by using the Admin Tool installed on a personal computer.
  • Page 65: Required Scanner Function Settings

    Login Settings — — — — page 63 Admin Password page 66 File Names — — — page 67 Multifeed Settings — — — — page 71 Scanner Adjustment — — — — page 74 fi-6010N Network Scanner Operator's Guide...
  • Page 66 Top Menu Left Side Menu e-Mail Print Save See ... Network Settings IP Address page 76 Admin Network — — — — page 78 Central Admin Server — — — — page 80 DNS Server page 82 WINS Server page 84 NTP Server page 85 Proxy Server...
  • Page 67: And Admin Tool)

    4.6 Using the System Settings Menus ..............51 4.7 Using the Network Settings Menus ..............76 4.8 Using the Device Status Menus................. 133 4.9 Using the Operation Logs Menus..............137 4.10 Using the Maintenance Menus................. 143 4.11 Setting Job Features..................159 fi-6010N Network Scanner Operator's Guide...
  • Page 68: Administrator Screens Via The Touch Panel

    Administrator Screens via the Touch Panel 4.1.1 Menu Tabs and Buttons On the touch panel screens (administrator), when one of the top menu tabs is selected, the related function tabs are displayed on the left side menu. Top Menu Left Side Menu Actual icon Shown in manual as...
  • Page 69: Input Fields And Entering Characters

    New Password Confirm New Password Authentication screen for setting a network Password page 102 printer Authentication screen for setting a network Password page 115 folder FTP Path for setting a network folder Password page 121 fi-6010N Network Scanner Operator's Guide...
  • Page 70: Administrator Screens Via The Network Interface

    Administrator Screens via the Network Interface 4.2.1 Menu Tabs and Buttons • When the [Scanner Settings] button is pressed On the Admin Tool scanner settings screens, when one of the top menu tabs is selected, the related function tabs are displayed on the left side menu. Top Menu Left Side Menu •...
  • Page 71 Show the version of the Admin Tool installed. [OK] button Accept any changes to the cur- rent screen settings. [Cancel] button Abandon any input to the cur- rent screen, and keep present settings and/or return to the pre- vious screen. fi-6010N Network Scanner Operator's Guide...
  • Page 72: Input Fields And Entering Characters

    4.2.2 Input Fields and Entering Characters Only passwords for the following fields are case sensitive. Screen Field name See... Login Password page 37 page 48 Authentication screen for setting a domain Password page 54 Login Settings Password page 63 Admin Password Current Password page 66 New Password...
  • Page 73: Iscanner Administrator Login: Via The Touch Panel

    If the normal screen display does not appear (for example: an "X" mark ATTENTION appears), wait for a few minutes and try again. If the problem still occurs, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. •...
  • Page 74 1. Enter a "User Name" and "Password". Enter "admin" for the user name. Passwords must be between 7 and 127 characters long. Alphanumeric characters (case sensitive) and symbols may be entered. • The "Caps Lock" indicator is on if the keyboard's Caps Lock is set. •...
  • Page 75: Setting Up For Administrator Access Via The Admin Tool

    2. On the [General] tab, press the [Settings] button on the "Browsing history". ⇒ The "Temporary Internet Files and History Settings" dialog box appears. 3. For "Check for newer versions of stored pages", select "Automatically". 4. For "Disk space to use", specify 63MB or above. fi-6010N Network Scanner Operator's Guide...
  • Page 76: Setting The Internet Explorer Trusted Sites

    5. Press the [OK] button. • Different browser versions may require a different set up procedure. • ATTENTION Do not use a proxy server setting. If any updates or service packs are available for Internet Explorer, make HINT sure they are applied. 4.4.2 Setting the Internet Explorer trusted sites Enter the target scanner URL as Internet Explorer trusted sites.
  • Page 77 4. Enter the URL of the scanner in the "Add this website to the zone" field, and press the [Add] button. Example: http://IP_address or scanner_name/ Different browser versions may require a different set up procedure. ATTENTION If any updates or service packs are available for Internet Explorer, make HINT sure they are applied. fi-6010N Network Scanner Operator's Guide...
  • Page 78: Installing The Admin Tool

    4.4.3 Installing the Admin Tool To setup the scanner via the network interface, install the Admin Tool to your personal computer. 1. According to the settings described in "4.7.2 Setting the Admin Network" (page 78), specify the URL in the following way. •...
  • Page 79 The fi Network Scanner Admin Tool download screen appears. 5. Press the [Download] button. Downloading is not possible while an administrator or user operation is being processed. ATTENTION ⇒ The "File Download - Security Warning" dialog box appears. fi-6010N Network Scanner Operator's Guide...
  • Page 80 6. Press the [Run] button. ⇒ The fi Network Scanner Admin Tool Setup Wizard appears. Do not close the Web browser or logout until installation is complete. ATTENTION If .NET Framework is not installed, the Microsoft Website is accessed HINT when installing the Admin Tool.
  • Page 81 To check the free space available for the currently selected folder, press the [Disk Cost] button. Installation will fail if the length of any installation path (folder path plus installation file name) exceeds 259 characters. Select an installation ATTENTION folder that respects this limit. fi-6010N Network Scanner Operator's Guide...
  • Page 82 9. Select the target user(s), and press the [Next] button. ⇒ Follow the prompts of the install wizard windows until a "fi Network Scanner Admin Tool has been successfully installed" message indicates that the installation has com- pleted. Press the [Close] button. ⇒...
  • Page 83: Uninstalling The Admin Tool

    The Admin Tool can be uninstalled from the personal computer it was installed on, from [Control Panel] - [Programs and Features]. Close the Admin Tool before uninstalling. If the Admin Tool is uninstalled while still open, normal operation of the open Admin Tool is not guaranteed. ATTENTION fi-6010N Network Scanner Operator's Guide...
  • Page 84: Iscanner Administrator Login: Via The Admin Tool

    If the normal screen display does not appear (for example: an "X" mark ATTENTION appears), wait for a few minutes and try again. If the problem still occurs, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. •...
  • Page 85 If the Admin Tool is started while there is insufficient free memory, a script error may occur. Try again after ensuring that there is enough free memory. 3. Press the [Connect] button. ⇒ The login screen appears. fi-6010N Network Scanner Operator's Guide...
  • Page 86 4. Enter a "User Name" and "Password". Enter "admin" for the user name. Passwords must be between 7 and 127 characters long. Alphanumeric characters (case sensitive) and symbols may be entered. 5. Press the [Login] button. ⇒ If the user name and password are valid, the "System Settings" screen appears.
  • Page 87: Using The System Settings Menus

    2. Select the [Screen Calibration] tab on the left side menu. ⇒ The "Screen Calibration" screen appears. 3. Press the [Calibrate Screen] button. ⇒ A blank calibration screen appears, with a red "+" (adjustment mark) in the top-left cor- ner. fi-6010N Network Scanner Operator's Guide...
  • Page 88 4. Touch the "+" with your fingertip. After being touched, the "+" will move to the next calibration posi- tion. Each time it stops, touch it again. The keyboard may also be used on the calibration screen: • HINT Press the [Home] key to jump straight to the post-calibration test screen.
  • Page 89 Parameter Error. Please input, again Press the [Enter] key to dismiss the error dialog, and perform the cal- ibration from Step 4 again, being careful to touch each calibration point accurately. fi-6010N Network Scanner Operator's Guide...
  • Page 90: Setting The Scanner Name

    4.6.2 Setting the Scanner Name A scanner name may be set to provide a network alias for the device. Do not use a name already being used in the network. Name duplication will cause a network connection error. For more details ATTENTION about how to deal with such errors, refer to "E.1.1 Administrator Screen...
  • Page 91 2. Enter a password. Passwords may be up to 256 characters long. 3. Press the [OK] button. If the user name and password are valid, the restart confirmation screen appears. fi-6010N Network Scanner Operator's Guide...
  • Page 92 6. Press the [Now] button. ⇒ The system is restarted. • If the new scanner name is the same as another device name already in HINT use on the network, communication problems will occur. In this case, try the following steps: 1.
  • Page 93: Setting The Language

    Select the desired language for the operating environment. ⇒ This returns to the "Language/Keyboard Selection" screen. 5. Press the [OK] button. ⇒ A language setting confirmation message appears in the selected language. 6. Press the [OK] button. ⇒ The system is restarted. fi-6010N Network Scanner Operator's Guide...
  • Page 94: Setting The Region/Timezone

    4.6.4 Setting the Region/Timezone 1. Select the [System Settings] tab on the top menu. 2. Select the [Region/Timezone] tab on the left side menu. ⇒ The "Region/Timezone" screen appears. 3. Press the [List] button for the "Timezone" input field. The default timezone is "(GMT+09:00) Osaka, Sapporo, Tokyo".
  • Page 95: Setting The Date/Time

    The date/time range that may be entered is from "January 1st 2001, 00:00:00" to "December 31st 2037, 23:59:59". When entering a one digit number for date and time, such as for January, prepend "0" and enter "01" in the input field. fi-6010N Network Scanner Operator's Guide...
  • Page 96 6. Press the [OK] button. ⇒ The date and time are set. • Pressing the [Get Time] button refreshes the current value of the internal HINT system date/time. • An adjustment that advances the system time by 20 minutes or more results in a session timeout and causes the scanner to logout.
  • Page 97: Setting The Time To Standby Mode

    However, if "Never" is specified for "Standby after", and automatic login is disabled for the currently logged in user, the login screen is displayed. • If automatic login is disabled, the login screen in displayed. For screen transmissions, refer to "2.1.1 Using the Startup Button" (page 22). fi-6010N Network Scanner Operator's Guide...
  • Page 98 1. Select the [System Settings] tab on the top menu. 2. Select the [Standby Mode] tab on the left side menu. ⇒ The "Standby Mode" screen appears. 3. Press the [List] button for the "Logout after" input field. ⇒ A list of "Logout after" times appears. 4.
  • Page 99: Setting The Login Method

    2. Select the [Login Settings] tab on the left side menu. ⇒ The "Login Settings" screen appears. 3. Select whether or not to enable automatic login. The default setting is [Off]. Select the [On] button to enable automatic login. fi-6010N Network Scanner Operator's Guide...
  • Page 100 Select the [Off] button to disable automatic login. • The automatic login setting is applied after the scanner is restarted or ATTENTION resumed from standby mode. • If Central Admin is enabled in a scanner for which automatic login is enabled, when the scanner is started or resumed from standby mode, preference is given to checking for available scanner settings, add-in installs and system settings in the Central Admin Server, over auto-...
  • Page 101 The default setting is [On]. Select the [On] button to enable login with the guest account. Select the [Off] button to disable login with the guest account. 6. Press the [OK] button. ⇒ The selected contents are set. fi-6010N Network Scanner Operator's Guide...
  • Page 102: Changing The Admin Password

    4.6.8 Changing the Admin Password Login is not possible without a password. If a password has been lost or forgotten, contact your FUJITSU scanner ATTENTION dealer or an authorized FUJITSU scanner service provider. This may incur a cost to reset the scanner.
  • Page 103: Setting A File Name Format

    A new sub-folder is created with the user name + date when saving scanned data to a folder. Select the Date Format [List] button to change the date format. Select the Delimiter [List] button to change the delimiter. fi-6010N Network Scanner Operator's Guide...
  • Page 104 5. Select a name format. By default, "Scanner Name" + "Date"+ "Time" is entered. • If the [Prefix] button is selected The character string entered in the input field is used as the file name. This may be up to 32 characters long, excluding the following symbols. \ / : * ? "...
  • Page 105 The delimiter is used for the file or folder name when saving scanned data. If "None" is selected, a delimiter is not added. 12. Press the [Preview] button. ⇒ The specified file name format is displayed to the right of the [Preview] button. fi-6010N Network Scanner Operator's Guide...
  • Page 106 13. Check the file name format. 14. Press the [OK] button. ⇒ The file name format is set.
  • Page 107: Setting The Multifeed Detection Method

    For document requirements for multifeed detection, refer to "A.5 Multifeed Detection Conditions" (page 416). 1. Select the [System Settings] tab on the top menu. 2. Select the [Multifeed Settings] tab on the left side menu. ⇒ The "Multifeed Settings" screen appears. fi-6010N Network Scanner Operator's Guide...
  • Page 108 3. Set the area for multifeed detection in the "Multifeed Detection" section. Starting from the top edge of a document sheet, set the area to be checked for multifeeds. Full Multifeeds will be detected within 17.5mm from either side of the cen- ter of paper.
  • Page 109 • If the values specified for "#1" and "#2" exceed the actual paper size, multifeeds will not be detected. 5. Press the [OK] button. ⇒ The document area to be monitored for multifeeds is set. fi-6010N Network Scanner Operator's Guide...
  • Page 110: Setting Scanning Performance

    4.6.11 Setting Scanning Performance Usually, it is not necessary to make any setting changes. 1. Select the [System Settings] tab on the top menu. 2. Select the [Scanner Adjustment] tab on the left side menu. ⇒ The "Scanner Adjustment" screen appears.
  • Page 111: Offset Settings

    This changes the length magnification correction value of the vertical scan. Using the fac- tory default setting as a starting point, the length of the scan can be magnified or reduced to between -3.1% and 3.1%. Press the [OK] button. ⇒ The length magnification setting is set. fi-6010N Network Scanner Operator's Guide...
  • Page 112: Using The Network Settings Menus

    Using the Network Settings Menus 4.7.1 Giving the Scanner an IP Address An IP address must be set in order to connect the scanner to a network. 1. Select the [Network Settings] tab on the top menu. 2. Select the [IP Address] tab on the left side menu. ⇒...
  • Page 113 The connection will be lost if the scanner's IP address is changed via the network interface. If connecting via an IP address, to continue with other settings, login to the network interface again using the new IP address. fi-6010N Network Scanner Operator's Guide...
  • Page 114: Setting The Admin Network

    4.7.2 Setting the Admin Network To use the Admin Tool or Central Admin Server for the scanner, perform the connection settings. 1. Select the [Network Settings] tab on the top menu. 2. Select the [Admin Network] tab on the left side menu. ⇒...
  • Page 115 Central Admin Console "Central Admin Server Settings" screen. • The following settings combinations are not possible. • Port Number "80" and SSL "On" • Port Number "443" and SSL "Off" fi-6010N Network Scanner Operator's Guide...
  • Page 116: Setting A Central Admin Server

    4.7.3 Setting a Central Admin Server If "On" is selected for "Central Admin", scanners can be targeted for Central Admin. 1. Select the [Network Settings] tab on the top menu. 2. Select the [Central Admin Server] tab on the left side menu. ⇒...
  • Page 117 When user roaming or job settings enabled, if communication with the Central Admin server is not possible a confirmation message will appear at login. If [OK] is selected, the settings information saved in the scanner are used. Selecting the [Cancel] button returns to the login screen. fi-6010N Network Scanner Operator's Guide...
  • Page 118: Setting The Dns Server

    4.7.4 Setting the DNS Server A primary DNS and secondary DNS can be set. 1. Select the [Network Settings] tab on the top menu. 2. Select the [DNS Server] tab on the left side menu. ⇒ The "DNS Server" screen appears. 3.
  • Page 119 The current FQDN is shown for the FQDN. HINT However, if the scanner is not connected to the network, the FQDN may not be displayed correctly. 6. Press the [OK] button. ⇒ The information entered is set. fi-6010N Network Scanner Operator's Guide...
  • Page 120: Setting The Wins Server

    4.7.5 Setting the WINS Server A primary WINS and secondary WINS can be set. 1. Select the [Network Settings] tab on the top menu. 2. Select the [WINS Server] tab on the left side menu. ⇒ The "WINS Server" screen appears. 3.
  • Page 121: Setting The Ntp Server

    The result of the time synchronization for the specified NTP server is shown. If no error message appears, the NTP server setting is valid. If an error message appears, refer to "E.1.1 Administrator Screen Messages" (page 435). 5. Press the [OK] button on the confirmation message screen. fi-6010N Network Scanner Operator's Guide...
  • Page 122 6. Press the [OK] button. ⇒ The NTP server is set. • The system time is automatically synchronized every six hours to that HINT supplied by the NTP server. • When the NTP server settings are changed, the system time is synchro- nized immediately.
  • Page 123: Setting The Proxy Server

    If this setting is not entered, the proxy setting on the "Network Folder", FTP server settings screen, cannot be used. For more details about specifying ATTENTION an FTP server folder as a network folder, refer to "4.7.14 Setting the Net- work Folders" (page 115). fi-6010N Network Scanner Operator's Guide...
  • Page 124: Setting The Login Ldap Server

    4.7.8 Setting the Login LDAP Server If a login LDAP server is set, user authentication will be checked. 1. Select the [Network Settings] tab on the top menu. 2. Select the [Login LDAP Server] tab on the left side menu. ⇒...
  • Page 125: Ldap Search Target

    6. The italic text represents variable character strings. LDAP Tree: Example example.com CN=Users Administrator Example 1 User A User B Example 4 User C OU=department OU=section A Example 3 User D Example 2 OU=section B User E fi-6010N Network Scanner Operator's Guide...
  • Page 126 Example 1: When searching for (administrator, user A, user B) CN=Users, DC=example, DC=com For LDAP server, Active Directory configuration is as follows. Example 2: When searching for (user C, user D, user E) OU=department, DC=example, DC=com For LDAP server, Active Directory configuration is as follows.
  • Page 127 4.7 Using the Network Settings Menus Example 3: When searching for (user C, user D), OU=section A, OU=department, DC=example, DC=com For LDAP server, Active Directory configuration is as follows. Example 4: When searching for all users DC=example, DC=com fi-6010N Network Scanner Operator's Guide...
  • Page 128 • For connecting with Global Catalog (when the [Global Catalog] button is selected in Step The following shows an example (where the parent domain name is example.com, and sub- domain name is sub.example.com) for the "Search Base (DN)" to be entered in Step 6.
  • Page 129: Setting The E-Mail Ldap Server

    6. Select the maximum number of results for e-mail address LDAP List searches. The default maximum is "1000". ⇒ The selected "Maximum Results" value is displayed. 7. Press the [OK] button. ⇒ The e-mail address LDAP server is set. fi-6010N Network Scanner Operator's Guide...
  • Page 130 To use the e-mail LDAP server, use a login user account. If the login ATTENTION LDAP server and e-mail LDAP server are different, according to the domain configuration or login name format, it may not be possible to use the e-mail LDAP server. For more details, refer to "LDAP Search Target"...
  • Page 131: Setting The Ldap Search Parameters

    Address from the e-Mail Address Book" (page 269). 1. Select the [Network Settings] tab on the top menu. 2. Select the [Customize LDAP Search] tab on the left side menu. ⇒ The "Customize LDAP Search" screen appears. fi-6010N Network Scanner Operator's Guide...
  • Page 132 The following table shows the correspondence between the administrator HINT "Customize LDAP Search" screen settings, and the regular user search condition buttons on the "e-Mail Address Book" - [LDAP List] tab. Conditions Descriptions Left Button Corresponds to the left button on the [LDAP List] tab. Middle Button Corresponds to the middle button on the [LDAP List] tab.
  • Page 133 Common Searches the common names of users registered in the LDAP server. Name This item can be set in the "Active Directory Users and Computers". If searching for a group, press the [Common Name] button. fi-6010N Network Scanner Operator's Guide...
  • Page 134 Buttons The items to be searched in the Active Directory Display Name Searches the display names of users registered in the LDAP server. • If none of the [First Name], [Last Name], [Common Name], or [Display HINT Name] buttons are selected, the corresponding search parameter button on the "e-Mail Address Book"...
  • Page 135 If the button names are changed, check the actual button image shown on the LDAP "e-Mail Address Book" screen. ATTENTION The button image may not show all characters entered. 7. Press the [OK] button. ⇒ The LDAP search parameters are set. fi-6010N Network Scanner Operator's Guide...
  • Page 136: Setting The E-Mail Server (Smtp Server)

    4.7.11 Setting the e-Mail Server (SMTP Server) 1. Select the [Network Settings] tab on the top menu. 2. Select the [SMTP Server] tab on the left side menu. ⇒ The "SMTP Server" screen appears. 3. Enter the SMTP server IP address, host name, or FQDN in the "Address" input field. •...
  • Page 137: Setting The Fax Server

    If the fax server setting is not required, leave the field blank. For more details about e-mail Address setting values, refer to "B.1 e-Mail Address Setting Values" (page 420). 4. Press the [OK] button. ⇒ The fax server is set. fi-6010N Network Scanner Operator's Guide...
  • Page 138: Setting The Network Printers

    4.7.13 Setting the Network Printers Set a printer connected to the network. The procedure for setting a network printer is as follows. 1. Check the printer driver. For more details, refer to "Checking the Printer Drivers" (page 103). 2. Set the printer properties. For more details, refer to "Setting the Printer Properties"...
  • Page 139: Checking The Printer Drivers

    When the "Installed" status is "Yes", the driver has been installed and the printer can be used as a network printer. Press the [Cancel] button. When the "Installed" status is "No", select version "Windows XP", and press the [OK] but- ton. ⇒The Windows® XP compatible driver is installed. fi-6010N Network Scanner Operator's Guide...
  • Page 140: Setting The Printer Properties

    ■ Setting the Printer Properties Use the following procedures to set a printer. 1. From the [Start] menu on the print server, select [Control Panel] - [Printers and Faxes]. ⇒ The "Printers and Faxes" window appears. 2. Right-click on a printer, and select [Properties]. ⇒...
  • Page 141 4. Select "Keep existing driver [recommended]" and press the [Next] button. 5. Follow the prompts on the wizard window until the "Printer Sharing" win- dow appears. 6. Specify the shared name. Enter "FUJITSUX.2 (Color)" for color printing. fi-6010N Network Scanner Operator's Guide...
  • Page 142 It is recommended to name the printer with an alias that indicates the contents of the properties settings as follows. ⇒ Follow the prompts on the wizard window. The "Completing the Add Printer Wizard" message indicates that the printer addition has completed.
  • Page 143: Registering A Network Printer (Network Tree)

    Desired domains may not be shown in the Printer Network. In this case, directly enter the network printer path name, or wait for a few minutes ATTENTION and re-open the screen for selecting a network printer. fi-6010N Network Scanner Operator's Guide...
  • Page 144 4. Select a domain ⇒ If login is required, an "Authentication" screen appears. If login is not required, the network tree expands and computer names are displayed under the selected domain. The "Caps Lock" and "Num Lock" indicators are shown on the authentica- HINT tion screen, when the administrator logs in via the scanner's touch panel.
  • Page 145 "Renaming a Network Printer" (page 112). • While the network tree is displayed, enter characters to be searched for in the "Find" field, and press the [Back] or [Next] button to focus the network tree on the specified characters. fi-6010N Network Scanner Operator's Guide...
  • Page 146: Registering A Network Printer (Network Path)

    ■ Registering a Network Printer (Network Path) 1. Select the [Network Settings] tab on the top menu. 2. Select the [Network Printer] tab on the left side menu. ⇒ The "Network Printer" screen appears. 3. Press the [Add] button. ⇒ The screen for selecting a network printer is displayed.
  • Page 147 The default network printer alias will be the same as the alias selected HINT from the network tree. For details on changing the printer alias, refer to "Renaming a Network Printer" (page 112). • The authentication screen may appear. fi-6010N Network Scanner Operator's Guide...
  • Page 148: Renaming A Network Printer

    ■ Renaming a Network Printer 1. Select the [Network Settings] tab on the top menu. Select the [Network Printer] tab on the left side menu. ⇒ The "Network Printer" screen appears. Select the network printer that is to be renamed. 4.
  • Page 149: Removing A Network Printer

    If removing a network printer is attempted while the network is not connected, the "Deleting" status on the screen be stopped. Before ATTENTION removing a network printer, check that the network is functioning nor- mally. fi-6010N Network Scanner Operator's Guide...
  • Page 150: Viewing The Printer Details

    ■ Viewing the Printer Details 1. Select the [Network Settings] tab on the top menu. 2. Select the [Network Printer] tab on the left side menu. ⇒ The "Network Printer" screen appears. 3. Select the desired network printer from the printer list. 4.
  • Page 151: Setting The Network Folders

    If the name of the network folder contains unrecognizable characters, check the codeset used. • If the number folders to be displayed is large, they may take a long time to appear. fi-6010N Network Scanner Operator's Guide...
  • Page 152: Registering A Network Folder (Network Tree)

    ■ Registering a Network Folder (Network Tree) 1. Select the [Network Settings] tab on the top menu. 2. Select the [Network Folder] tab on the left side menu. ⇒ The "Network Folder" screen appears. 3. Press the [Add] button. ⇒ The screen for adding a network folder is displayed.
  • Page 153 The "Caps Lock" indicator is on if the keyboard's Caps Lock is set. The "Num Lock" indicator is on if the keyboard's Num Lock is set. fi-6010N Network Scanner Operator's Guide...
  • Page 154 1. Enter a User Name. This may be up to 256 characters long. 2. Enter a Password. This may be up to 256 characters long. 3. Press the [OK] button. ⇒When the user name and password are valid, or if login is not required, the network tree expands and computer names are displayed under the selected domain.
  • Page 155: Registering A Network Folder (Network Path)

    This may be up to 80 characters long. "/" and "\" cannot be used in a folder alias. If the [Add] button is pressed without entering a "Folder Alias", the shared name is set as the folder alias. fi-6010N Network Scanner Operator's Guide...
  • Page 156 6. Enter a "Network Path". Set the network path in the following format: \\Domain_name\Computer_name\Folder_name[\Folder_name] The minimum requirement for a network path is: \\Domain_name\Computer_name\Folder_name This may be up to 255 characters long. Sub folders ([\Folder_name]is the example above) are optional. "/" and "\" can be used as a delimiter for the folder alias. If "/"...
  • Page 157: Registering A Network Folder (Ftp Path)

    For the "Computer_name", specify the IP address, host name, or FQDN. 7. Enter a user name and password for login to the FTP sever. "User Name" or "Password" may be up to 256 characters long. fi-6010N Network Scanner Operator's Guide...
  • Page 158 8. For "Authentication", specify whether or not to save the entered "User Name" and "Password". When the [Remember] button is selected, the "User Name" and "Password" are saved. The "User Name" and "Password" saved for authentication are used on the regular user screen.
  • Page 159 The default network folder alias will be the same as the alias selected HINT from the network tree. For details on changing the folder alias, refer to "Renaming a Network Folder" (page 124). • Select a readable and writable network folder. • The authentication screen may appear. fi-6010N Network Scanner Operator's Guide...
  • Page 160: Renaming A Network Folder

    ■ Renaming a Network Folder 1. Select the [Network Settings] tab on the top menu. 2. Select the [Network Folder] tab on the left side menu. ⇒ The "Network Folder" screen appears. 3. Select the network folder that is to be renamed. 4.
  • Page 161 If the network folder is an FTP server folder, the following screen is dis- HINT played. In this case, the "FTP Path" cannot be changed. 6. Press the [OK] button. ⇒ The network folder is renamed. fi-6010N Network Scanner Operator's Guide...
  • Page 162: Removing A Network Folder

    ■ Removing a Network Folder 1. Select the [Network Settings] tab on the top menu. 2. Select the [Network Folder] tab on the left side menu. ⇒ The "Network Folder" screen appears. 3. Select the network folder that is to be removed from the folder list. 4.
  • Page 163: Viewing The Network Folder Details

    3. Select the desired network folder from the folder list. 4. Press the [Details] button. ⇒ The information for the selected network folder is displayed. If the network folder is an FTP server folder, the following screen is dis- HINT played. fi-6010N Network Scanner Operator's Guide...
  • Page 164: Setting The Destination For Alert Notifications

    4.7.15 Setting the Destination for Alert Notifications An e-mail address can be specified to which an alert notification will be sent whenever a scanner alert situation occurs. If an SMTP server has not been setup, alert notifications cannot be sent. For more details about how to set an SMTP server, refer to "4.7.11 Setting the e-Mail Server (SMTP Server)"...
  • Page 165: Checking The Network Connection With A Ping Test

    • For an IP address The following format should be used xxx.xxx.xxx.xxx (xxx is a value from 0 to 255). • For a host name or FQDN Up to 255 characters may be used. fi-6010N Network Scanner Operator's Guide...
  • Page 166 4. Press the [Ping] button. ⇒ A ping test is performed and the results are displayed. For more details about the result, refer to "Checking basic network operation with a Ping test" (page 388).
  • Page 167: Checking The Network Operating Status

    1. Select the [Network Settings] tab on the top menu. 2. Select the [Network Status] tab on the left side menu. ⇒ The "Network Status" screen shows the status of the currently operating network connec- tion. fi-6010N Network Scanner Operator's Guide...
  • Page 168: Setting The Link Speed/Duplex Mode

    • If connection to LDAP server is not possible, try the following steps: HINT 1. Disconnect the LAN cable, and press the [Shutdown] button on the touch panel to turn the scanner off. 2. Reboot the scanner with the LAN cable disconnected, and enter a nonduplicate IP address.
  • Page 169: Using The Device Status Menus

    Shows the current scanner system version number. Scanner Version Shows the current scanner firmware version number. Date of Registration Shows the date on which the scanner was first used. Cumulative On Time Shows the total elapsed usage time of the scanner. fi-6010N Network Scanner Operator's Guide...
  • Page 170: Viewing The Usage Status

    4.8.2 Viewing the Usage Status Information about the number of documents that have been scanned and the status of the scanner's consumable parts (pad assembly or pick roller) can be viewed. For details on consumable replacement, refer to "7.6 Replacing Parts" (page 367).
  • Page 171: Resetting The Usage Counter

    3. Press the [Clear] button for the part replaced. ⇒ The counter reset confirmation screen appears. 4. Press the [Yes] button. ⇒ The counter value is reset to "0", and the "Status" field turns green again. fi-6010N Network Scanner Operator's Guide...
  • Page 172: Viewing The Add-In Status

    4.8.3 Viewing the Add-in Status If an add-in module is installed, the following steps can be performed. An Add-in is an application created by using the fi-6010N SDK (development kit). 1. Select the [Device Status] tab on the top menu.
  • Page 173: Using The Operation Logs Menus

    Even if the [Region/Timezone] or [Date/Time] settings are changed, the order of the log entries will not be changed. 1. Select the [Operation Logs] tab on the top menu. 2. Select the [User Log] tab on the left side menu. ⇒ The "User Log" screen appears. fi-6010N Network Scanner Operator's Guide...
  • Page 174 3. Select the log you wish to view. ⇒ The details of the selected log are displayed. Pressing the [OK] button returns to the "User Log" screen. On the "User Log" screen, pressing the [Refresh] button updates the infor- HINT mation shown.
  • Page 175: Downloading The User Logs In Csv Format

    2. Select the [User Log] tab on the left side menu. ⇒ The "User Log" screen appears. 3. Press the [Clear All] button. ⇒ The "clear all" confirmation screen appears. 4. Press the [Yes] button. ⇒ All the user operation logs are cleared. fi-6010N Network Scanner Operator's Guide...
  • Page 176: Managing The System Log

    4.9.2 Managing the System Log Up to 1,000 system information logs (such as for startup, shutdown, and system errors) are saved in the scanner. • System log may contain private information such as e-mail addresses or ATTENTION fax numbers, so care should be taken when managing such data. •...
  • Page 177 "4.7.15 Setting the Destination for Alert Notifica- tions" (page 128). To deal with errors, refer to "E.1.3 Alert Monitor System Log Messages" (page 453). Message Message Code For information about messages, refer to "E.1.2 System Message Body Log Messages" (page 449). fi-6010N Network Scanner Operator's Guide...
  • Page 178: Downloading The System Log In Csv Format

    ■ Downloading the System Log in CSV Format The default file name is "SystemLog.csv". When downloaded to a computer, the file will contain CSV format data. The file is saved in the fol- lowing form: "Date","Time","Type","Message" 1. Select the [Operation Logs] tab on the top menu. 2.
  • Page 179: Using The Maintenance Menus

    2. The user data store is backed up (with 100 users: A001 to A100). 3. The user data store (containing users A001 to A100) is cleared. 4. 960 "new" users (A001 to A050 and B001 to B910) login. fi-6010N Network Scanner Operator's Guide...
  • Page 180 5. The user data store (containing users A001 to A100) backed up in Step 2 is restored. ⇒ Users A001 to A100 are to be restored, of whom 50 are already in the current user data store (users A001 to A050) and so will be overwrite targets. ⇒...
  • Page 181: Backing Up The User Data Store

    Warning" dialog box. Make sure there is enough free space on the disk where it is to be saved and press the [Save] button. If there is not enough free disk space, an incomplete file may be saved. ⇒ The "Save As" dialog box appears. fi-6010N Network Scanner Operator's Guide...
  • Page 182 5. Enter a file name. Use of a name that includes the scanner name and backup date is recommended. 6. Press the [Save] button. ⇒ A backup copy of the user data store is saved. Do not change the contents of data store backup files. If changed, the file may no longer be used as a backup.
  • Page 183: Restoring The User Data Store

    4. Press the [Restore] button. ⇒ An "OK to overwrite?" confirmation message appears. 5. Press the [Yes] button. ⇒ After the user data store is restored, a restore completion message appears. 6. Press the [OK] button. fi-6010N Network Scanner Operator's Guide...
  • Page 184: Clearing The User Data Store

    ■ Clearing the User Data Store The scanner's user data store can be deleted. Clearing the user data store cannot be undone. ATTENTION 1. Select the [Maintenance] tab on the top menu. 2. Select the [User Data Store] tab on the left side menu. ⇒...
  • Page 185: Maintaining The System Settings

    1. Select the [Maintenance] tab on the top menu. 2. Select the [System Settings File] tab on the left side menu. ⇒ The "System Settings File" screen appears. 3. Press the [Get CSV] button. ⇒ The "File Download" dialog box appears. fi-6010N Network Scanner Operator's Guide...
  • Page 186: Backing Up System Settings

    4. Press the [Save] button. The size of the user log file is displayed in the "File Download" dialog box. HINT Make sure there is enough free space on the disk where it is to be saved and press the [Save] button. If there is not enough free disk space, an incomplete file may be saved.
  • Page 187: Restoring System Settings

    IP address or scanner name), the new IP address or scanner name will be needed. If not known, the current state of these set- tings can always be checked by physically logging in to the scanner via the touch panel interface. fi-6010N Network Scanner Operator's Guide...
  • Page 188: Resetting Factory Defaults

    ■ Resetting Factory Defaults 1. Select the [Maintenance] tab on the top menu. 2. Select the [System Settings File] tab on the left side menu. ⇒ The "System Settings File" screen appears. Press the [Reset] button. ⇒ A confirmation message appears. 4.
  • Page 189: Updating The Scanner's System Software

    • Wait for the system to restart. • ATTENTION During the update, do not press and hold down the startup button for longer than four seconds, as it may cause the scanner to function abnormally. fi-6010N Network Scanner Operator's Guide...
  • Page 190 The network interface connection will be lost when the scanner is HINT restarted to complete the system update. To continue with other set- tings, wait a short time for the device to restart, then login to the net- work interface again.
  • Page 191: Installing/Uninstalling An Add-In Module

    4.10 Using the Maintenance Menus 4.10.4 Installing/Uninstalling an Add-in Module An Add-in is an application created using the fi-6010N SDK (Developer's Kit). This section describes how to install and uninstall an Add-in module. ■ Installing an Add-in Module 1. Select the [Maintenance] tab on the top menu.
  • Page 192: Uninstalling An Add-In Module

    ■ Uninstalling an Add-in Module 1. Select the [Maintenance] tab on the top menu. 2. Select the [Add-in Manager] tab on the left side menu. ⇒ The "Add-in Manager" screen appears. 3. Press the [Uninstall] button. ⇒ A confirmation message appears. 4.
  • Page 193: Setting The Information Output Level

    The default level is "1". Increasing the value of the output level increases the detail of information collected, but slows down processing. Set the level requested by your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. 4. Press the [Set] button.
  • Page 194: Obtaining Technical Support

    If any problems occur when setting up or using the scanner, technical support information can be collected to help determine the cause of the problem. The information obtained should be sent to your FUJITSU scanner dealer along with the scanner when given for repair.
  • Page 195: Setting Job Features

    A job menu is a menu arrangement of the job sequences set by the user. For example, you can assign a job sequence that sends scan data by e-mail and then saves it in a folder as a button, and set it on a "Job Menu". Job Menu fi-6010N Network Scanner Operator's Guide...
  • Page 196 3. Job Group Settings A job group is a group of users assigned with the same job menu, by the administrator. Users associated with a group can use its job menu. All users who are not included in any job group belong to a default group. For example, job menu A is assigned to group A, and job menu D is assigned to the default group.
  • Page 197: Job Setting Quick User Guide

    Group" (page 182). Job Groups List View, add to, or edit the Job Groups List. Settings For Selected Group(s) Set the assigned job menus, initial post-login menu, and job group members for the selected job group. fi-6010N Network Scanner Operator's Guide...
  • Page 198: Processing A Job

    Processing a job For details, refer to "6.13 Processing a Job" (page Process the job. 349). When a user logs in, the assigned job menu is dis- played, and a job can be selected and processed. Before processing a job set on the Central Admin Console "Job Mode Settings"...
  • Page 199: Setting A Job Sequence

    ■ Adding a job sequence This section describes how to add a job sequence. 1. Select the [Job Sequences] tab. ⇒ The "Jobs List" window appears. 2. Select the [New] button. ⇒ The "Job Details" window appears. fi-6010N Network Scanner Operator's Guide...
  • Page 200 3. Set the [Job Name], [Comment], and [If error occurs]. Enter a job name in [Job Name]. This may be up to 64 characters long. Enter comments about the job sequence in [Comment]. This may be up to 256 characters long.
  • Page 201 [On] or [Off]. • If a title or message is not set in "Message Screen", even if the [Message Screen] button on the "Job Menu" is set to [On], the actual "Message Screen" is not displayed. fi-6010N Network Scanner Operator's Guide...
  • Page 202 6. Set a job item. Select the list button under [Job Items] to select one of following items: • e-Mail • • Print • Save When the [Delete this Item] button is clicked, a confirmation window appears. Click the [OK] button to delete the item. When the [Insert New Item] button is selected, the item selected in the list of items is inserted before the current item.
  • Page 203 "LDAP Server" section on the "Central Admin Server Settings" screen However, whether or not SSL is used, depends on each LDAP server set- tings. For more details about how to filter the LDAP List, refer to "Filtering the LDAP List" (page 173). fi-6010N Network Scanner Operator's Guide...
  • Page 204 8. If [Fax] is selected for the job item in Step 6, perform settings related to sending a fax. For details about setting values, refer to "6.5 Sending the Scanned Data by Fax" (page 277). If the [e-Mail address of user] option button is selected for "Notification To (Sender's e-Mail Address)", the e-mail address of the logged in user is used when a job sequence is per- formed.
  • Page 205 10. If [Save] is selected for the job item in Step 6, perform settings related to saving. For details about setting values, refer to "6.7 Saving the Scanned Data to a Network Folder" (page 299). fi-6010N Network Scanner Operator's Guide...
  • Page 206 • Select the [Browse] button to set the network folder from the "Folder List" HINT window. • Select the [Name Format] button to set the file name from the "File Names" window. For more details about settings values, refer to "4.6.9 Setting a File Name Format"...
  • Page 207: Cloning A Job Sequence

    2. Select the job sequence to be edited. 3. Select the [Edit] button. ⇒ The "Job Details" window appears. 4. Edit the detailed job sequence settings. 5. Select the [OK] button. ⇒ The settings of the job sequence are changed. fi-6010N Network Scanner Operator's Guide...
  • Page 208: Deleting A Job Sequence

    ■ Deleting a job sequence This section describes how to delete a job sequence. 1. Select the [Job Sequences] tab. ⇒ The "Jobs List" window appears. 2. Select the job sequence to be deleted. 3. Select the [Delete] button. ⇒ The confirmation window appears.
  • Page 209: Filtering The Ldap List

    Enter the user name and e-mail address to be filtered, in whole or in part. Up to 256 characters may be entered for both user names and e-mail addresses. If both a user name and e-mail address is entered, data containing either of them are searched as "AND Search". fi-6010N Network Scanner Operator's Guide...
  • Page 210 5. Select the filter target. If multiple items are selected, data containing any of the search words are searched as "OR Search". Checkbox Filter target in the Active Directory name First Name Filters the first names of users registered in the LDAP server. Last Name Filters the last names of users registered in the LDAP server.
  • Page 211 User names may be up to 129 characters long. Passwords may be up to 256 characters long. 2. Select the [OK] button. • To display all results, delete all filter strings and then select the [Find] but- ton. fi-6010N Network Scanner Operator's Guide...
  • Page 212: Setting A Job Menu

    4.11.3 Setting a Job Menu Assign the job sequence set in "4.11.2 Setting a Job Sequence" (page 163) to a job button, and job buttons on a job menu. Up to 100 job menus may be set. ■ Adding a job menu This section describes how to add a job menu.
  • Page 213 Add-in module appears in the Job Menu. Even if the checkbox is selected, if the Add-in module is not installed in ATTENTION a scanner, the target job menu button will not be shown on the screen. fi-6010N Network Scanner Operator's Guide...
  • Page 214 8. Select a job from the list. To filter jobs, enter part of a "Job Name" and "Comment", or select all, and HINT press the [Find] button. "Job Name" may be up to 64 characters long. "Comment" may be up to 256 characters long. To clear all filtered results, delete the entered "Job Name"...
  • Page 215 The relationship between the order of job buttons on the "Job Menu Layout" area and the arrangement of buttons on the "Job Menu" is shown below. 12. Select the [OK] button. ⇒ A job menu is added to the "Job Menus List" window. fi-6010N Network Scanner Operator's Guide...
  • Page 216: Cloning A Job Menu

    ■ Cloning a job menu This section describes how to clone a job menu. 1. Select the [Job Menus] tab. ⇒ The "Job Menus List" window appears. 2. Select the job menu to be cloned. 3. Select the [Clone] button. ⇒...
  • Page 217: Deleting A Job Menu

    The details for the selected job menu appears in the "Job Menu Layout" area. The information for the selected job menu shown in the "Job Menu Lay- out" area cannot be edited. To edit this information, select the [Edit] but- ATTENTION ton. fi-6010N Network Scanner Operator's Guide...
  • Page 218: Setting A Job Group

    4.11.4 Setting a Job Group Assign the job menu set in "4.11.3 Setting a Job Menu" (page 176) to a job group. Users included in a group can use the job menus assigned to the group. Up to 100 job groups may be set. ■...
  • Page 219 The Multi-function Main Menu is not shown. The Job Menu always appears after a regular user login. The user cannot switch between the Multi-Function Main Menu and Job Menu by pressing the "Menu Mode" button. fi-6010N Network Scanner Operator's Guide...
  • Page 220 8. Select the [Edit] button. ⇒ The "Group Member Settings" window appears. 9. Set the login user name format. • If [User Principal Name] is selected The user principal name appears as the user name in the Group Membership List and the LDAP list.
  • Page 221 To select the checkboxes for all users, press the [Select All] button. To clear the checkboxes for all users, press the [Deselect All] button. • To filter the LDAP List, refer to "Filtering the LDAP List" (page 190) more details. fi-6010N Network Scanner Operator's Guide...
  • Page 222 12. Select the [<<<] button. ⇒ The user is added to the in the Group Membership List. Users added to the Group Membership List are grayed on the LDAP list. • Up to 1,000 users can be registered as a job group member. HINT •...
  • Page 223: Editing A Job Group

    The "Job Groups List" window appears. 2. Select the job group to be deleted. 3. Select the [Delete] button. ⇒ The confirmation window appears. 4. Select the [OK] button. ⇒ The job group is deleted fi-6010N Network Scanner Operator's Guide...
  • Page 224: Viewing The Detailed Settings For A Job Group

    ■ Viewing the detailed settings for a job group This section describes how to view the detailed settings for a job group. 1. Select the [Job Groups] tab. ⇒ The "Job Groups List" window appears. 2. Select the job group to view. ⇒...
  • Page 225 The user cannot switch between the Multi-Function Main Menu and Job Menu by pressing the "Menu Mode" button. 8. Select the [OK] button. ⇒ A job menu is assigned to users who are not included in a job group. fi-6010N Network Scanner Operator's Guide...
  • Page 226: Filtering The Ldap List

    ■ Filtering the LDAP List This section describes how to filter the LDAP List on the "Job Group Member Settings" screen. 1. In the [Search Position] drop-down list box on the "LDAP List" window, select the fil- tering method. The default setting is [Head (abc...)]. Search Example Description...
  • Page 227 Filters the first names of users registered in the LDAP server. Common Filters the common names of users registered in the LDAP server. Name This item can be set in [Active Directory Users and Computers]. fi-6010N Network Scanner Operator's Guide...
  • Page 228 Checkbox Filter target in the Active Directory name Display Filters the display names of users registered in the LDAP server. Name 4. Select the [Find] button. ⇒ The filtered results appear. • If the [Find] button is selected, an authentication screen appears. HINT Perform the following procedure for authentication.
  • Page 229: (Central Admin Console)

    5.8 Installing an Add-in..................... 230 5.9 Updating the Scanner System Settings ............232 5.10 Setting the Job Mode..................236 5.11 Viewing Scanner-Side Status................239 5.12 Viewing Event Log .................... 242 5.13 Maintaining Central Admin Settings ............... 244 fi-6010N Network Scanner Operator's Guide...
  • Page 230: Using Central Admin Console Window

    Using Central Admin Console Window 5.1.1 Buttons This section describes the buttons displayed on the Central Admin Console window. Shown in manual Button Used to ... as... [Exit] button Exit the Central Admin Console. [Disconnect] button Disconnect the connection to the Central Admin Server.
  • Page 231: Input Fields And Entering Characters

    220 Settings Group Add-in Group Authentication screen for setting a network printer Password page 232 Authentication screen for setting a network folder Password page 232 FTP Path for setting a network folder Password page 232 fi-6010N Network Scanner Operator's Guide...
  • Page 232: Central Admin Console Quick Guide

    Central Admin Console Quick Guide Administrator operations for management using the Central Admin Console are as follows. Pre-settings For more details, refer to "5.3 Pre- settings for Using Central Admin Installing the Central Admin Server Console" (page 198). Software Installing the Central Admin Con- sole Setting up a Firewall for the Central Admin Server...
  • Page 233: Scanner Settings

    • For more details, refer to "5.11 Viewing Scanner-Side Status" (page 239). Monitoring For more details, refer to "5.12 Viewing Event Log" (page 242). Maintaining For more details, refer to "5.13 Maintaining Central Admin Set- tings" (page 244). fi-6010N Network Scanner Operator's Guide...
  • Page 234: Pre-Settings For Using Central Admin Console

    Pre-settings for Using Central Admin Console This section explains the required pre-settings for using the Central Admin Console. 5.3.1 Installing the Central Admin Server Software Instal the Central Admin Server software in a personal computer. The following describes the required settings for scanner. 1.
  • Page 235 • After the Central Admin Server software is installed, a Windows user account (Account name: iSCentralAdmin) is added. This user is required for Central Admin, therefore, do not change or delete the account. fi-6010N Network Scanner Operator's Guide...
  • Page 236 • For details of the operating environment when installing the Central Admin HINT Server software, refer to "1.4.3 Requirements for Central Admin Server" (page 13). • When installing the Central Admin Server software, the same necessary pre-settings before logging in with the Admin Tool are required. For more details, refer to "4.4 Setting up for Administrator Access via the Admin Tool"...
  • Page 237: Importing The Certificate

    9b 2a 65 45 03 a3 c4 f4 e5 e6 ad ec df 9f" is as follows. cc ce a0 66 e3 9c 9b 2a 65 45 03 a3 c4 f4 e5 e6 ad ec df 9f fi-6010N Network Scanner Operator's Guide...
  • Page 238: Installing The Central Admin Console

    5.3.2 Installing the Central Admin Console Instal the Central Admin Console in a personal computer. 1. Perform Step 1 Step 3 "Installing the Admin Tool" (page 42). ⇒ The download screen appears. 2. Press the [Next] button for the iScanner Central Admin Console. ⇒...
  • Page 239 When "Installation complete" is displayed, the installation is complete. Press the [Close] button. ⇒ After installation is completed, log out from fi-6010N on the Web browser and close the Web browser. ⇒ After installation, the Central Admin Console can be started by selecting [Start] menu - [All Programs] - [iScanner Central Admin] - [iScanner Central Admin Console].
  • Page 240 • The Admin Tool must be installed before installing the Central Admin Con- ATTENTION sole. For more details about how to install the Admin Tool, refer to "4.4.3 Installing the Admin Tool" (page 42). • If the Central Admin Console is already installed, skip to "5.3.3 Setting up a Firewall for the Central Admin Server"...
  • Page 241: Setting Up A Firewall For The Central Admin Server

    For more details, refer to "4.7.2 Setting the Admin Network" (page 78). • "Central Admin Server" screen from the "Network Settings" tab For more details, refer to "4.7.3 Setting a Central Admin Server" (page 80). fi-6010N Network Scanner Operator's Guide...
  • Page 242: Uninstalling The Central Admin Server Software/Console

    Even if uninstalled, data will remain. Delete this data if it is not required. For Windows® XP, data is saved in the following way. C:\Documents and Settings\User_name \Local Settings\Application Data\FUJITSU \iScannerCentralAdminConsoxxx The character string shown in italics is variable. User_name can be the name of any Central Admin Console user.
  • Page 243: Central Admin Server Login: Via The Central Admin Console

    If the normal screen display does not appear (for example: an "X" mark appears), wait for a few minutes and try again. If the problem still occurs, ATTENTION contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. •...
  • Page 244 1. Select [Start] menu - [All Programs] - [iScanner Central Admin] - [iScanner Central Admin Console]. ⇒ The Central Admin Console starts. 2. Set the "Connect to" field. Enter the Central Admin Server IP address, host name, or FQDN. • If the port number was changed in "5.5 Setting the Central Admin ATTENTION...
  • Page 245 Enter "admin" for the user name. Passwords must be between 7 and 127 alphanumeric characters (case sensitive). 5. Select the [Login] button. ⇒ If the user is authenticated, the Central Admin Console main window appears. fi-6010N Network Scanner Operator's Guide...
  • Page 246: Using Central Admin Console Main Window

    5.4.1 Using Central Admin Console Main Window ■ Links and Buttons This section describes the links and buttons shown on the Central Admin Console main window. Shown in manual Actual icon Used to ... as... [Central Admin Access the "Central Admin Server Settings] Server Settings"...
  • Page 247 • Add-in Installs • Scanner Settings For details, refer to "5.11 Viewing Scanner-Side Status" (page 239). [Event Log] button Access the "Event Log" win- dow. For details, refer to "5.12 Viewing Event Log" (page 242). fi-6010N Network Scanner Operator's Guide...
  • Page 248: Lists

    ■ Lists This section describes the lists shown on the main screen of the Central Admin Console. 1. iScanner Network 2. iScanner Updates 3. iScanner Events 4. Ver. List Name Used to ... iScanner Network Show the registration status of scanners. The scanner group managed by the Central Admin Server is called the "iScanner Network".
  • Page 249 Show the number of scanners targeted for updates. • Finished Show the number of scanner which have finished updating. • Pending Show the number of scanners updating/waiting to be updated. • Error Show the number of scanners which could not be updated. fi-6010N Network Scanner Operator's Guide...
  • Page 250 List Name Used to ... iScanner Events Show latest 100 events in the event log. • Log for events that occur on the Central Admin Server • Log for events that occur in the scanners, where "Type" is "Error" or "Warning" The following is a description of the displayed items.
  • Page 251: Setting The Central Admin Server

    The central admin server settings can be set from the "Central Admin Server Settings" window. To open the "Central Admin Server Settings" window, select the [Central Admin Server Settings] link in the Central Admin Console main window. fi-6010N Network Scanner Operator's Guide...
  • Page 252: [Change Administrator Password] Button

    ■ [Change Administrator Password] button This opens the "Change Administrator Password" window to change the administrator password. • Current Password Enter the current password. • New Password/Confirm New Password Password must be between 7 and 127 characters long. Blank spaces at the start and end will be removed.
  • Page 253: [User Roaming Data (Select & Clear)] Button

    Selects all checkboxes in the user list. • [Deselect All] button Deselects all checkboxes in the user list. • User list Access the user list. • [Back] button Returns to the "Central Admin Server Settings" window. fi-6010N Network Scanner Operator's Guide...
  • Page 254: Scanner Registration

    ■ Scanner Registration Sets whether to reject registration of a scanner whose configuration information is not set. • Automatically add new scanners to the Central Admin configuration when they are discovered. Select the checkbox to add a new scanner automatically. If the checkbox is selected, scanner configuration can automatically be added to the Central Admin Server.
  • Page 255: Ldap Server

    The default is "30" days. ■ [OK] button Confirms the entered contents and returns to the Central Admin Console main window. ■ [Cancel] button Returns to the Central Admin Console main window without confirming the entered contents. fi-6010N Network Scanner Operator's Guide...
  • Page 256: Setting Scanner Configuration

    Setting Scanner Configuration Scanner configuration is set by adding, editing and deleting scanner configuration. Scanner configuration can be set from the "Scanner List & Config" window. The "Scanner List & Config" window is displayed by selecting the [Scanner List & Config] button in the Central Admin Console main window.
  • Page 257 Install update notification date — (*1) — (*1) Install Status Add-in Version Scanner Add-in install module — version — (*1) — (*1) Last Add-in Install Last Add-in install Settings Group Name used to identify applied — scanner settings fi-6010N Network Scanner Operator's Guide...
  • Page 258: [Import Config] Button

    Configuration Configuration Item Comment from file from scanner Current Scanner The current scanner settings sta- — (*1) — (*1) Settings Status Last Scanner Set- Date and time scanner settings — (*1) — (*1) tings Update were last updated Last Inventory Date and time inventory was last —...
  • Page 259: [Export Config] Button

    This may be up to 15 characters long. • Settings Group Select the settings group of the scanner to be filtered. The default is "(All)". • Add-in Group Select the Add-in group of the scanner to be filtered. The default is "(All)". fi-6010N Network Scanner Operator's Guide...
  • Page 260: [New] Button

    • Comment Enter a part of or entire comment on the scanner to be filtered. This may be up to 64 characters long. Line-feed cannot be used. • Status Select the status of the scanner to be filtered. The default is "(All)". •...
  • Page 261: [Clone] Button

    • To include the scanner in the iScanner Network again, re-register the scanner on the Central Admin Server. ■ [Select All] button Selects all checkboxes in the scanner list. fi-6010N Network Scanner Operator's Guide...
  • Page 262: [Deselect All] Button

    ■ [Deselect All] button Deselects all checkboxes in the scanner list. ■ Scanner information list Shows the scanner information list. • Scanner name link Shows the "Scanner Details" window to view the scanner information details. • [Back] button Returns to the "Scanner List & Config" window. •...
  • Page 263: [Back] Button

    Admin Tool will take a few minutes. If a "Connection error" occurs, and the screen returns to the screen for specifying a connection, try re-connecting. ■ [Back] button Returns to the Central Admin Console main window. fi-6010N Network Scanner Operator's Guide...
  • Page 264: Updating The System

    Updating the System The system can be updated by uploading a new system update module and setting update calls. The system can be updated from the "System Updates" window. The "System Updates" window is displayed by selecting the [System Updates] link in the Central Admin Console main window.
  • Page 265: [Back] Button

    Pending updates are performed in the following order: 1. System Updates 2. Add-in Installs 3. Scanner Settings ■ [Back] button Returns to the Central Admin Console main window. fi-6010N Network Scanner Operator's Guide...
  • Page 266: Installing An Add-In

    Installing an Add-in An Add-in for scanner can be installed by uploading an Add-in module and setting update calls. An Add-in can be installed from the "Add-in Installs" window. The "Add-in Installs" window is displayed by selecting the [Add-in Installs] link in the Central Admin Console main window.
  • Page 267: Upload & Release A New Add-In

    Add-in has been installed. Pending updates are performed in the following order: 1. System Updates 2. Add-in Installs 3. Scanner Settings ■ [Back] button Returns to the Central Admin Console main window. fi-6010N Network Scanner Operator's Guide...
  • Page 268: Updating The Scanner System Settings

    Updating the Scanner System Settings The scanner settings can be updated by uploading new sets of scanner settings and setting update calls. The scanner settings can be updated from the "Scanner Settings" window. The "Scanner Settings" window is displayed by selecting the [Scanner Settings] link in the Central Admin Console main window.
  • Page 269: Upload & Release A New Set Of Scanner Settings

    For details, refer to "4.6 Using the System Settings Menus" (page 51). However, the "Import Scanner Settings" button for the "System Settings" menu is only dis- played on the Central Admin Console "Edit Scanner Settings " window. fi-6010N Network Scanner Operator's Guide...
  • Page 270 The current configuration of the scanners saved by using the Admin Tool can be sent to the Central Admin Server from the "Import Scanner Settings" screen. The current configura- tion of the scanners is the information saved in "Backing up System Settings" (page 150).
  • Page 271: [Back] Button

    5.9 Updating the Scanner System Settings ■ [Back] button Returns to the Central Admin Console main window. fi-6010N Network Scanner Operator's Guide...
  • Page 272: Setting The Job Mode

    5.10 Setting the Job Mode The job mode can be set by registering a new job mode and setting a release schedule. The job mode can be set from the "Job Mode Settings" window. The "Job Mode Settings" window is displayed by selecting the [Job Mode Settings] link in the Central Admin Console main window.
  • Page 273: Create & Release A New Set Of Job Mode Settings

    For details, refer to "4.11.4 Setting a Job Group" (page 182). • [Close] button Registers the entered job mode settings and returns to the "Job Mode Settings" window. fi-6010N Network Scanner Operator's Guide...
  • Page 274: [Back] Button

    • Settings Release Schedule Sets the schedule to release job mode settings. • Now Release immediately. • Later Specifies the date and time to release. The default value is 00:00 of the following day. The value can be specified within the range between the current time and a month later.
  • Page 275: Viewing Scanner-Side Status

    Select the Add-in group of the scanner to be filtered. The default is "(All)". • Status Select the status of the scanner to be filtered. The default is "(All)". • [Refresh List] button Refreshes the list by filtering using the entered filtering conditions. fi-6010N Network Scanner Operator's Guide...
  • Page 276: [Call Now] Button

    ■ [Call Now] button Select the checkbox of the scanners to be notified, and select the [Call Now] button to issue a call. If a target scanner is in error status, the error is cleared before notification. The scanner-side status is changed to "Pending", and becomes an update target.
  • Page 277: [Back] Button

    • Version Displayed version is different depending on the Update Type of the [Scanner-Side Status] link selected in the Central Admin Console main window. ■ [Back] button Returns to the Central Admin Console main window. fi-6010N Network Scanner Operator's Guide...
  • Page 278: Viewing Event Log

    5.12 Viewing Event Log Event logs output from the scanners or the Central Admin Server can be viewed. The latest 100 items of event logs can be viewed in the Central Admin Console main window. • Log for all events that occur on the Central Admin Server •...
  • Page 279: Event Log

    Opens the event list. • Date/Time link Displays the "Event Details" window to view the event details. • [Back] button Returns to the "Event Log" window. ■ [Back] button Returns to the Central Admin Console main window. fi-6010N Network Scanner Operator's Guide...
  • Page 280: Maintaining Central Admin Settings

    5.13 Maintaining Central Admin Settings Central admin settings set by the administrator can be backed up, restored, and obtained. 5.13.1 Backing Up Central Admin Settings Central admin settings set by the administrator can be backed up. Central admin settings can be restored using the backup file. Take backups periodically just in case.
  • Page 281 Before executing the AmBackup.exe command, confirm that the storage disk HINT has sufficient free space. If free space is insufficient, an incomplete file may be saved. The required free capacity is approximately twice the free capacity under the "Data" folder in the installation folder. fi-6010N Network Scanner Operator's Guide...
  • Page 282: Restoring Central Admin Settings

    5.13.2 Restoring Central Admin Settings Central admin settings that has been backed up can be restored to the Central Admin Server. To restore central admin settings, execute "AmRestore.exe" from the command prompt on the personal computer installed with the Central Admin Server software. •...
  • Page 283: Obtaining Technical Support On The Central Admin Server

    Central Admin Server software. When obtaining technical support, the Central Admin Sever is in a temporarily suspended state. Do not try to obtain technical support unless requested by your FUJITSU scanner dealer, or a problem occurs.
  • Page 285: Chapter 6 Regular User Operations

    6.9 Enabling/Disabling the Scan Viewer ..............340 6.10 Editing the Scanned Data in the Scan Viewer ..........343 6.11 Checking the User Log ..................346 6.12 Maintenance ...................... 348 6.13 Processing a Job ....................349 fi-6010N Network Scanner Operator's Guide...
  • Page 286: Loading Documents

    Loading Documents This section describes how to load documents onto the scanner. 6.1.1 How to Load Documents 1. Check the number of document sheets. For document sheet limits, refer to "A.3 Maximum Document Loading Capacity" (page 414). 2. Fan the documents. 1.
  • Page 287 3. Adjust the side guides to the width of the documents. Move the side guides so that they touch both sides of the documents. If there is any space between the side guides and the edges of documents, the scanned data may be skewed. fi-6010N Network Scanner Operator's Guide...
  • Page 288 • The output tray holds the document sheets after they have been HINT scanned. It can be pulled out and adjusted to the size of the document being scanned. 1. Pull out before scanning. 2. The extension flap of output tray may also be lifted up, as shown in the figure below.
  • Page 289: Loading Documents Using A Carrier Sheet

    Fold the sheet tightly and smooth out the crease. Otherwise, the sheet may be skewed during scanning. 2. Open the Carrier Sheet and insert the document. Align the fold with the right edge of the Carrier Sheet so that the document fits into the Carrier Sheet at the upper corner. fi-6010N Network Scanner Operator's Guide...
  • Page 290 3. Load the Carrier Sheet with the black and white striped section (printed section) fac- ing downwards as shown in the following figure. 4. Adjust the side guides to the width of the Carrier Sheet. Adjust the side guides so that there is no space between the guides and the Carrier Sheet. Space between the guides and Carrier Sheet may cause the Carrier Sheet to become unaligned during scanning, and skew the scanned image.
  • Page 291 Also, the folded part of the document may be mis-detected, causing uninten- tional trimming of the scanned image. In this case, the folded edge of the docu- ment should be placed 1mm away from the edge of the Carrier Sheet. fi-6010N Network Scanner Operator's Guide...
  • Page 292: Using Touch Panel Screens: Regular User

    Using Touch Panel Screens: Regular User 6.2.1 Common Buttons and Indicators After the user logs in, the following buttons and indicators are shown on the touch panel screens. Icon Shown in manual as... Used to ... [Up] button, [Down] button Scroll up or down between items.
  • Page 293: Regular User Settings Overview

    Admin Server is not possible at login, a confirmation message will appear. If the [OK] button is selected, the settings saved in the scanner are used. Selecting the [Cancel] button returns to the login screen. fi-6010N Network Scanner Operator's Guide...
  • Page 294: Main Menu Screen

    6.2.3 Main Menu Screen The type of buttons (e-Mail/Fax/Print/Save) displayed on the main menu differs according to the settings of the relevant server. The following describes the main menu according to settings for e-Mail, Fax, Print and Save. Shown in manual Icon Used to ...
  • Page 295 For details, refer to "6.6 Printing the Scanned Data" (page 286). [Save] button Access the "Save" screen. For details, refer to "6.7 Saving the Scanned Data to a Network Folder" (page 299). [Logout] button Logout the current user. fi-6010N Network Scanner Operator's Guide...
  • Page 296: Job Menu Screen

    6.2.4 Job Menu Screen The type of buttons displayed on the job menu differs according to the job settings. The following describes an example of a job menu according to job settings. Shown in manual Icon Used to... as... [Menu Mode] but- Switch between the "Multi-Function Main Menu"...
  • Page 297: Input Fields And Entering Characters

    Only passwords for the following fields are case sensitive. Screen Field See... Login Password page 262 Authentication screen for setting a network printer Password page 286 Authentication screen for setting a network folder Password page 299 PDF Password Password page 323 Confirm Password fi-6010N Network Scanner Operator's Guide...
  • Page 298: Logging In: Regular User Mode

    Logging in: Regular User Mode Do not move or shake the scanner when it is turned on. AUTION This can damage the rotating hard disk drive and cause data to be lost. LDAP (Active Directory) is used to perform user authentication for the scanner login. This allows either of the following two forms of login name to be specified in the user info.
  • Page 299 "@" or ".". The following symbols cannot be used: / \ [ ] : ; | = , + * ? < > " Password Passwords may be up to 256 characters long, and all alphanumerics (case sensitive) and symbols are allowed. fi-6010N Network Scanner Operator's Guide...
  • Page 300 • The "Caps Lock" indicator is on if the keyboard's Caps Lock is set. • HINT The "Num Lock" indicator is on if the keyboard's Num Lock is set. • If "Global Catalog" is selected for the login LDAP server, the "UPN Suffix" input field is displayed.
  • Page 301: Sending The Scanned Data By E-Mail

    30 addresses at any one time. e-Mail addresses can be selected directly from the e-mail address book. HINT For details, refer to "6.4.1 Selecting an e-Mail Address from the e-Mail Address Book" (page 269). fi-6010N Network Scanner Operator's Guide...
  • Page 302 3. Enter a file name for the scan data into the "File Name:" field. File names may be up to 128 characters long, excluding the following symbols. \ / : * ? " < > | { } By default, "Scanner Name" + "Scan Date/Time" is entered. The following file names cannot be used: •...
  • Page 303 "6.10 Editing the Scanned Data in the Scan Viewer" (page 343). 10. On the "Scan Viewer" screen, press the [Send] button. ⇒ The scanned data is sent with the specified file as an e-mail attachment. fi-6010N Network Scanner Operator's Guide...
  • Page 304 ⇒ The "Main Menu" screen is shown again. • The maximum size for an attachment is the size that has been set by the HINT administrator. To change this setting, contact the administrator. For more details about this setting, refer to "4.7.11 Setting the e-Mail Server (SMTP Server)"...
  • Page 305: Selecting An E-Mail Address From The E-Mail Address Book

    If logged in with the guest account 1. On the "Send e-Mail" screen, press the button to the right of the e-mail address field. ⇒ The "e-Mail Address Book" screen for the LDAP list appears. fi-6010N Network Scanner Operator's Guide...
  • Page 306 2. Select the search parameter. The search parameters and button names shown on the left and middle buttons can be cus- tomized. For details about customizing the search parameters and the button names, refer to "4.7.10 Setting the LDAP Search Parameters" (page 95).
  • Page 307 "----" is shown instead. For example, if the display format is "LastName FirstName", and the user "LastName: Fujitsu, FirstName: None" is registered on the LDAP server, the search result is displayed as follows. Search result display format: Fujitsu ---- •...
  • Page 308 7. Select the desired e-mail address from the search results. • Selecting an e-mail address and pressing the [+] button, can be used to HINT add a selected e-mail address to an e-mail. To add multiple e-mail addresses, simply select another e-mail address and press the [+] button. •...
  • Page 309: Adding A Contact To The E-Mail Address Book

    Or on the "Main Menu" screen, press the [Maintenance] button, then on the "Maintenance" screen, press the [Edit e-Mail Address] button. For details, refer to "6.12 Maintenance" (page 348). 2. Select the [My List] tab. 3. Press the [Add] button. ⇒ The "Add e-Mail Address" screen appears. fi-6010N Network Scanner Operator's Guide...
  • Page 310 4. Enter the contact details. First names and last names may be up to 64 characters long. Last name and/or first name may be skipped. For more details about e-mail address setting values, refer to "B.1 e-Mail Address Setting Values" (page 420).
  • Page 311: Editing A Contact In The E-Mail Address Book

    For more details about E-mail Address setting values, refer to "B.1 e-Mail Address Setting Values" (page 420). 6. Press the [OK] button. ⇒ The edited e-mail address is saved in your My List address book. fi-6010N Network Scanner Operator's Guide...
  • Page 312: Deleting A Contact From The E-Mail Address Book

    6.4.4 Deleting a Contact from the e-Mail Address Book The following explains how to delete a contact from your My List. Contacts stored in the LDAP list cannot be deleted. 1. Open the "e-Mail Address Book" screen. To access the "e-Mail Address Book" screen, on the "Send e-Mail" screen, press button to the right of an e-mail address field.
  • Page 313: Sending The Scanned Data By Fax

    3. In the "Notification To (Sender’s e-Mail Address)" field, enter an e-mail address for Send Fax result alert e-mails. For more details about E-mail Address setting values, refer to "B.1 e-Mail Address Setting Values" (page 420). fi-6010N Network Scanner Operator's Guide...
  • Page 314 4. Press the [Scan&Send] button. When [Scan Viewer] is On, this will be a [Scan] button. ⇒ Scanning starts. After the last page is displayed on the "Scanning" screen, the scan data is sent by fax, and the touch panel screen returns to the "Main Menu". •...
  • Page 315: Selecting A Fax Number From The Fax Number List

    Pressing the [Fax No.] button displays the search results by fax numbers, in number order. Pressing the [Recipient] button displays the search results by recipient names, in alphabeti- cal order. 3. Press the [Search Position] button. ⇒ The "Search Position" screen appears. fi-6010N Network Scanner Operator's Guide...
  • Page 316 4. Select a search position setting. By default, [Head (abc...)] is set. Search Example Search Method Search Result Position Target Head The LDAP fax number list is searched abc, abc1, abcd, ... (abc...) for entries which start with the charac- ter string entered in Step Anywhere...
  • Page 317 The search results are displayed on the right side. Five results are displayed at a time. 7. Select a fax number. 8. Press the [OK] button. ⇒ The fax number is added to the field in the "Send Fax" screen. Only one fax number can be entered at a time. fi-6010N Network Scanner Operator's Guide...
  • Page 318: Adding A Contact To The Fax Number List

    6.5.2 Adding a Contact to the Fax Number List A maximum of 1,000 contacts can be stored in the fax number list. Fax contact numbers added to the list are accessible to all users. 1. Open the "Fax Number List" screen. To access the "Fax Number List"...
  • Page 319 Recipients may be up to 64 characters long. Fax numbers may be up to 64 digits long. Numbers and the following symbols can also be used. 4. Press the [OK] button. ⇒ The contact is added to the fax number list. fi-6010N Network Scanner Operator's Guide...
  • Page 320: Editing A Contact In The Fax Number List

    6.5.3 Editing a Contact in the Fax Number List Fax contact numbers edited in the list are accessible to all users. 1. Open the "Fax Number List" screen. To access the "Fax Number List" screen, on the "Send Fax" screen, press Or on the "Main Menu"...
  • Page 321: Deleting A Contact From The Fax Number List

    The "Delete Fax Number" confirmation screen appears. 4. Check the contact that is set to be deleted is the correct one and press the [OK] but- ton. ⇒ The contact is deleted from the fax number list. fi-6010N Network Scanner Operator's Guide...
  • Page 322: Printing The Scanned Data

    Printing the Scanned Data 1. On the "Main Menu" screen, press the [Print] button. ⇒ The "Print" screen appears. Network printer preferences are saved for each user, and will be shown each time that user logs in. The scan information can be changed by pressing the [Scan Settings] but- HINT ton.
  • Page 323 • Only the administrator may add printers to the list, or edit the details of printers already on the list. For more details about adding printers, refer to "4.7.13 Setting the Network Printers" (page 102). fi-6010N Network Scanner Operator's Guide...
  • Page 324 4. Press the [OK] button. ⇒ This returns you to the "Print" screen. • User authentication may sometimes be required to access a network HINT printer. When the authentication is required, the "Print Server Authentica- tion" screen appears. The authentication procedure follows. 1.
  • Page 325 When printing privileges are being checked, data may be spooled temporarily. 8. Check the scanned data. For more details about the "Scan Viewer" screen, refer to "6.10 Editing the Scanned Data in the Scan Viewer" (page 343). fi-6010N Network Scanner Operator's Guide...
  • Page 326 9. On the "Scan Viewer" screen, press the [Print] button. ⇒ The scanned data is printed. The document name for the scanned data to be printed is the name of the scanner. The printing status is displayed in the user log until printing has finished. The network printer printing result is not displayed.
  • Page 327: Scaling

    6.6 Printing the Scanned Data 6.6.1 Scaling Set the print size for the scanned data. The setting selected here will be used every time the user prints a document. 1. Press the [Scaling] button. ⇒ The "Scaling" screen appears. fi-6010N Network Scanner Operator's Guide...
  • Page 328 2. Select the print scale of the data. By default, this is "100%". • Shrink to Fit The image is reduced so that the entire image fits into the area available for printing (area inside the dotted line). Further enlargement is not possible. If the positioning setting is "Center", the control point for printing is the center point of the area available for printing.
  • Page 329 6.6 Printing the Scanned Data Print Sheet Scanned Data Positioning Result Large Small Center Print Sheet Scanned Data Scanned Data Top Left Scanned Data Same Same Center Scanned Data Scanned Data Print Sheet Top Left fi-6010N Network Scanner Operator's Guide...
  • Page 330 • 100% The image is printed at full scale, regardless of the paper size. If the positioning setting is "Center", the control point for printing is the center point of the print sheet. If the positioning setting is "Top Left", the control point for printing is the top left corner of the print sheet.
  • Page 331 If "100%" is set, the edge cropping area is included in the print data. • When "Shrink to Fit" is set, the printing result may differ from the original document since the starting position or available area of printing depends on each individual printer. fi-6010N Network Scanner Operator's Guide...
  • Page 332: Positioning

    6.6.2 Positioning Set the print position of the scanned data. The setting selected here will be used every time the user prints a document. 1. Press the [Positioning] button. ⇒ The "Positioning" screen appears. 2. Select the print positioning of the data. By default, this is "Center".
  • Page 333 Printing For more details on the print scaling setting, refer to "6.6.1 Scaling" (page 291). ⇒ This returns to the "Print" screen. The selected positioning setting is displayed to the right of the [Positioning] button. fi-6010N Network Scanner Operator's Guide...
  • Page 334: Simplex/Duplex

    6.6.3 Simplex/Duplex Set whether to print on one side (simplex mode) or both sides (duplex mode). 1. Press the [Simplex/Duplex] button. ⇒ The "Simplex/Duplex" screen appears. 2. Select a print mode. Initially, this setting is "Duplex (Long Edge)". "Long Edge" means that sheets are flipped vertically for printing. "Short Edge"...
  • Page 335: Saving The Scanned Data To A Network Folder

    Scan preferences can be changed by pressing the [Scan Settings] button. HINT For more details, refer to "6.8 Setting the Scan Options" (page 304). 2. Press the [Select] button. ⇒ "The "Folder List" screen appears. fi-6010N Network Scanner Operator's Guide...
  • Page 336 3. Select a network folder. • On the "Folder List" screen, select a folder and press the [Details] button HINT to view the details of the selected network folder. If a folder path is too long for one line, the path will be automatically split into subsequent lines. •...
  • Page 337 • • COM0 to COM9 • LPT0 to LPT9 • If the file format is changed in "Scan Settings", the file name set on the "File Names" screen is reset in the "Save As" field. fi-6010N Network Scanner Operator's Guide...
  • Page 338 6. Select if existing files with the same name are to be overwritten. The default setting is [No]. If a file name already exists on the network, the existing file will not be overwritten and the scanned data will be lost. Whether or not the file was successfully saved can be checked in the user log.
  • Page 339 If the saving to the network folder fails, an error message with the follow- HINT ing title is sent by e-mail from the scanner to the e-mail address registered in the LDAP server for the currently logged-in user. Network Scanner (XXXX) Error fi-6010N Network Scanner Operator's Guide...
  • Page 340: Setting The Scan Options

    Setting the Scan Options On the following screens, press the [Scan Settings] button to access the "Scan Settings" screens. • "Send e-Mail" screen • "Send Fax" screen • "Print" screen • "Save" screen The "Scan Settings" screen contains the following items. •...
  • Page 341 6.8 Setting the Scan Options • [Quality] tab • [Advanced] tab fi-6010N Network Scanner Operator's Guide...
  • Page 342 The following two classes of setting options are available. • Default These are the factory settings. To put a high priority on the scan speed, press the [Default] button. • Custom This is shown when the user has customized any scanning preferences from the "Default" option.
  • Page 343 • Dropout Color • Dropout Color RGB Color — • Dropout Color, "None" Grayscale — (when Resolution is "600dpi") • High Compression for Color PDF • JPEG file format Black & White — • Compression fi-6010N Network Scanner Operator's Guide...
  • Page 344 Setting which become Conditions of setting Option invalid which become invalid • Resolution, "600dpi" • Carrier Sheet Basic Paper Size Auto • Resolution, "600dpi" • Carrier Sheet Long Page Mode • Searchable PDF • Color Mode, "Auto" • Blank Page Skip •...
  • Page 345 — mode Orientation • Carrier Sheet Other than Auto — • Paper Size, long page mode • Resolution, "600dpi" • Carrier Sheet Multifeed Setup — • Paper Size, long page mode Edge Cropping — — fi-6010N Network Scanner Operator's Guide...
  • Page 346: Carrier Sheet

    6.8.1 Carrier Sheet Set whether or not to use a Carrier Sheet. If a Carrier Sheet is to be used, set the output size of the scanned image. 1. On the "Scan Settings" screen, select the [Basic] tab. 2. Press the [Carrier Sheet] button. ⇒...
  • Page 347: Color Mode

    Documents with only a minor amount of color • Documents printed in gray or other close-to-black colors. To ensure such documents are scanned in color mode, press the [RGB Color] button on the "Color Mode" screen. fi-6010N Network Scanner Operator's Guide...
  • Page 348: Paper Size

    6.8.3 Paper Size Set a paper size for the scan data. 1. On the "Scan Settings" screen, select the [Basic] tab. 2. Press the [Paper Size] button. ⇒ The "Paper Size" screen appears. 3. Select a paper size for the scan data. Button Paper size (mm) Button...
  • Page 349 If the height is 14in or longer, the paper size setting must be set to allow long pages. For more details, refer to "Long Page Mode" (page 314). 3. Press the [OK] button. ⇒ The custom paper size is set. fi-6010N Network Scanner Operator's Guide...
  • Page 350: Long

    ■ Long Page Mode When scanning pages which are longer than standard documents, the "Allow long pages" setting must be specified. 1. On the "Scan Settings" screen, select the [Basic] tab. 2. Press the [Paper Size] button. ⇒ The "Paper Size" screen appears. 3.
  • Page 351 Width: 2in to 8.5in (50.8mm to 216mm) Height: 2.91in to 34in (74mm to 863.6mm). 6. Press the [OK] button. ⇒ This returns you to the "Scan Settings" screen. "Custom" is displayed to the right of the [Paper Size] button. fi-6010N Network Scanner Operator's Guide...
  • Page 352: Resolution

    6.8.4 Resolution Changing the resolution level affects the scan data in the following ways. High resolution Low resolution Scan speed Slow Fast Scan quality High File size Large Small 1. On the "Scan Settings" screen, select the [Basic] tab. 2. Press the [Resolution] button. ⇒...
  • Page 353: Scan Mode

    [Duplex] if both front and reverse sides are to be scanned. ⇒ Selecting a scan mode returns you to the "Scan Settings" screen. The selected mode is displayed to the right of the [Scan Mode] button. fi-6010N Network Scanner Operator's Guide...
  • Page 354: File Format

    6.8.6 File Format Set the file format for the scan data. For some scan settings, it may not be possible to select certain file formats. Option JPEG TIFF MTIFF Searchable PDF — — — PDF Password — — — Compression A (*1) A (*1) A (*1)
  • Page 355 The "File Format" screen appears. 3. Select a file format. ⇒ Selecting a file format returns you to the "Scan Settings" screen. The selected format is displayed to the right of the [File Format] button. fi-6010N Network Scanner Operator's Guide...
  • Page 356: Searchable Pdf

    6.8.7 Searchable PDF When the file format is PDF, the scanned data can be converted to a searchable PDF. The scanner may fail to correctly recognize the following kinds of documents (characters) as text. However, by changing color mode and/or improving image ATTENTION quality for scanning, such a document may be successfully recognized.
  • Page 357 First Page Only the first page of the PDF is made searchable. All Pages All pages of the PDF are made searchable. Pages... Only the specified range of pages in the PDF is made searchable. fi-6010N Network Scanner Operator's Guide...
  • Page 358 • When the resolution is [600dpi], the [All Pages] and [Pages...] options HINT cannot be selected. • The page numbers set here correspond to those shown on the Preview and "Scan Viewer" windows. • After pressing the [Pages] button, the "Searchable PDF for Pages" screen appears.
  • Page 359: Pdf Password

    1. On the "Scan Settings" screen, select the [Save] tab. 2. Press the [PDF Password] button. ⇒ The "Require PDF Password" screen appears. 3. Select whether or not a password is required. ⇒ When [Yes] is selected, the "PDF Password" screen appears. fi-6010N Network Scanner Operator's Guide...
  • Page 360 4. Enter a password and confirm password. Passwords may be up to 16 characters long. In addition to alphanumeric characters, spaces and the following symbols can be used: ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ~ •...
  • Page 361: Compression

    "6.8.6 File Format" (page 318), "High Compression for Color PDF" can be used. ⇒ Selecting a compression level returns you to the "Scan Settings" screen. The selected rate is displayed to the right of the [Compression] button. fi-6010N Network Scanner Operator's Guide...
  • Page 362 • When "High Compression for Color PDF" is selected, characters and back- HINT grounds on the document are compressed separately. In order to do this, the file size of the document that mostly consists of text characters becomes smaller while keeping the quality of the characters as they are. However, this mode is not appropriate for scanning photographs or pictures since these graphical materials are recognized as background and compressed as such, causing degradation in the scanned image.
  • Page 363 6.8 Setting the Scan Options • File size (KB) for black & white files Compression level cannot Resolution be selected 150dpi 200dpi 300dpi 600dpi 1430 fi-6010N Network Scanner Operator's Guide...
  • Page 364: Brightness

    6.8.10 Brightness The brightness setting can be adjusted to improve the visual appearance of the scanned data. 1. On the "Scan Settings" screen, select the [Quality] tab. 2. Press the [Brightness] button. ⇒ The "Brightness" screen appears. 3. Select a brightness level. ⇒...
  • Page 365: Contrast

    2. Press the [Contrast] button. ⇒ The "Contrast" screen appears. 3. Select a contrast level. ⇒ Selecting a contrast level returns you to the "Scan Settings" screen. The selected level is displayed to the right of the [Contrast] button. fi-6010N Network Scanner Operator's Guide...
  • Page 366: Sharpness

    6.8.12 Sharpness The sharpness setting adjusts the sharpness of characters on an image to improve the visual appear- ance of the scanned data. When using the sharpness setting, the sharpness level can be adjusted with this setting. 1. On the "Scan Settings" screen, select the [Quality] tab. 2.
  • Page 367: Dropout Color

    Scan and remove all green details. Blue Scan and remove all blue details. ⇒ Selecting a dropout color returns you to the "Scan Settings" screen. The selected setting is displayed to the right of the [Dropout Color] button. fi-6010N Network Scanner Operator's Guide...
  • Page 368: Background Removal

    6.8.14 Background Removal The background of a scanned image can be removed to make image clearer. The level of back- ground removal can be adjusted. 1. On the "Scan Settings" screen, select the [Quality] tab. 2. Press the [Background Removal] button. ⇒...
  • Page 369: Blank

    The "Blank Page Skip" screen appears. 3. Select whether or not blank pages are to be skipped. ⇒ This returns you to the "Scan Settings" screen. The selected setting is displayed to the right of the [Blank Page Skip] button. fi-6010N Network Scanner Operator's Guide...
  • Page 370: Page Orientation

    6.8.16 Page Orientation Automatically rotates each scanned data page that contains text through 0°, 90°, 180°, or 270°, so the text is upright. This function determines a document orientation based on Roman charac- ters printed on the document. Therefore, it may not work properly for the ATTENTION following kinds of documents: When scanning such documents, do not set automatic page orientation.
  • Page 371 Select this setting when scanning a document with opposing left and right pages. The scanned data is output with the same orientation as the original docu- ment. Original document Scanned data Front side Reverse side Front side Reverse side ABC DEF ABC DEF Feed direction fi-6010N Network Scanner Operator's Guide...
  • Page 372 Page Status Orientation Short Edge This setting can only be used if the [Top-feed], [Left-feed], [Right-feed], or [Bottom-feed] is selected. Select this setting when scanning a document with opposing top and bottom pages. The front side of the document is output with the same orientation as the original data, whereas the data on the reverse side is rotated 180 degrees.
  • Page 373: Multifeed Detection (Layer And Length)

    [Auto] paper size, and the document bundle being scanned ATTENTION contains different size pages. ⇒ This returns you to the "Scan Settings" screen. The selected setting is displayed to the right of the [Multifeed Setup] button. fi-6010N Network Scanner Operator's Guide...
  • Page 374: Edge Cropping

    6.8.18 Edge Cropping For scanned data, the width of the area for edge cropping can be adjusted, so that unwanted sec- tions are not scanned. If using edge cropping, the width of the edges to be cropped can be adjusted with this setting. 1.
  • Page 375 • If page orientation is set, edge cropping is performed after the document orientation is corrected. In the following example, [Left-feed] is selected for page orientation. Document Page Orientation Edge Cropping [Left-feed] Feed direction fi-6010N Network Scanner Operator's Guide...
  • Page 376: Enabling/Disabling The Scan Viewer

    Enabling/Disabling the Scan Viewer The "Scan Viewer" screen can be set to appear before the scanned data is processed. The scanned data can be checked and edited on the "Scan Viewer" screen. For details, refer to "6.10 Editing the Scanned Data in the Scan Viewer" (page 343).
  • Page 377 The scanned data is shown on the "Scan Viewer" screen and may be edited. On the "Scan Viewer" screen, check and edit the scanned data, and then press the [Send] button. The scanned data is sent as an e-mail attachment. fi-6010N Network Scanner Operator's Guide...
  • Page 378 • During the scan, the following screen is shown. HINT The file size is shown in units of 10KB on the right of the screen. If "High Compression for Color PDF" has been selected, the pre-compression file size is shown. Note that because the final output file has not been created yet, the actual file size may differ from the estimated value shown.
  • Page 379: Editing The Scanned Data In The Scan Viewer

    "Scan Viewer" screen. is pressed, the height of the scanned data will be scaled to fit the "Scan Viewer" screen. fi-6010N Network Scanner Operator's Guide...
  • Page 380: Rotating A Scanned Page

    6.10.2 Rotating a Scanned Page The scanned data showed on the "Scan Viewer" screen can be rotated 90 degrees right or left, or 180 degrees. If the scanned data is rotated 90 degrees, the edited scanned data, in its rotated condition, can be sent as an e-mail attachment, by fax, print, or saved to a network folder.
  • Page 381: Deleting A Scanned Page

    [OK] button is pressed, the scanned data is deleted and the screen returns to whichever one of the following it came from: • Send e-Mail • Send Fax • Print • Save • Job Menu fi-6010N Network Scanner Operator's Guide...
  • Page 382: Checking The User Log

    6.11 Checking the User Log The latest 100 user operation logs are shown for the current user. Even if the [Region/Timezone] or [Date/Time] settings are changed, the order of the log entries will not be changed. 1. On the "Main Menu" screen, press the [User Log] button. ⇒...
  • Page 383 "Result" column until the scanned data is completely sent to the print server. Save Scanned data is saved in a network folder. Pages Shows the number of pages scanned. Description xxxxxxxxxxxxxxxx Shows the status and description of the operation. fi-6010N Network Scanner Operator's Guide...
  • Page 384: Maintenance

    6.12 Maintenance 1. On the "Main Menu" screen, press the [Maintenance] button. ⇒ The "Maintenance" screen appears. • Pressing the [Edit e-Mail Addresses] button opens the "e-Mail Address Book" screen. e-Mail addresses can be added, edited, or deleted on the "e-Mail Address Book" screen. For details, refer to "6.4.2 Adding a Contact to the e-Mail Address Book"...
  • Page 385: Processing A Job

    When the scan has completed, the "Scan Viewer" screen opens. For more details about the "Scan Viewer" screen, refer to "6.10 Editing the Scanned Data in the Scan Viewer" (page 343). [Scan Viewer] is initially "On". HINT fi-6010N Network Scanner Operator's Guide...
  • Page 386 Check the scanned data. For more details about the "Scan Viewer" screen, refer to "6.10 Editing the Scanned Data in the Scan Viewer" (page 343). 4. Press the [OK] button on the "Scan Viewer". ⇒ The data is processed according to the specified job. While the job is being processed, the process is shown in real time on the "Job Progress"...
  • Page 387 If the job sequence is processed successfully, the touch panel screen returns to the "Job Menu". If an error occurs during the job process, press the [OK] button on the "Job Progress" or "Job Report" screen. Pressing the [OK] button returns to the "Job Menu". fi-6010N Network Scanner Operator's Guide...
  • Page 388: Enabling/Disabling The Message Screen

    6.13.1 Enabling/Disabling the Message Screen You can set whether or not to show the "Message Screen" for checking the contents of a job. This section uses an example where buttons from [Job1] to [Job6] have been set. 1. On the "Job Menu" screen, press the [Message Screen] button. ⇒...
  • Page 389 The contents of the job sequence are shown on the "Message Screen". • If a job sequence is processed when the [Message Screen] button is set to "Off" Scanning starts and the job is processed without showing the "Message Screen". fi-6010N Network Scanner Operator's Guide...
  • Page 391: Scanner Care

    7.3 Cleaning the LCD Touch Panel................364 7.4 Cleaning the Keyboard/Keyboard Cover ............365 7.5 Cleaning the Carrier Sheet ................. 366 7.6 Replacing Parts ....................367 7.7 Replacing the Keyboard Cover................376 7.8 Performing a Scan Test ..................378 fi-6010N Network Scanner Operator's Guide...
  • Page 392: Cleaning

    1 pack (24 sheets) Pre-moistened with Cleaner F1, Cleaning Wipes are used instead of moistened cloths. Soft, dry cloth Any commercially available lint-free product Contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider to obtain these products.
  • Page 393: Which Parts And When

    • Documents with large areas of printing • Chemically treated paper such as carbonless paper • Paper containing large amounts of calcium carbonate filler • Documents written in pencil • Documents with insufficiently fused toner fi-6010N Network Scanner Operator's Guide...
  • Page 394: Cleaning The Adf

    Cleaning the ADF The ADF should be cleaned after approximately every 1,000 scanned sheets. However, this criteria varies according to the type of documents scanned. For example, it may be necessary to clean the ADF more frequently when documents with insufficiently fused toner are scanned. The glass scanner windows inside the ADF can become hot when the AUTION scanner is used.
  • Page 395 "Pick roller" (page 362). Idler rollers (× 4) Refer to "Idler rollers" (page 362). Glass scanner windows (× 2) Refer to "Glass scanner windows" (page 362). Ultrasonic sensor (× 2) Refer to "Ultrasonic sensor" (page 362). fi-6010N Network Scanner Operator's Guide...
  • Page 396 When cleaning inside the ADF, take care that the cloth does not get snagged by the document sensors and damage them. ATTENTION • Pad assembly Clean the rubber pads by gently wiping downwards in the direction of the arrows. Take care not to snag and bend the pick springs.
  • Page 397 ⇒ The "Maintenance" screen appears. 2) Press the [Roller Cleaning] button. ⇒ The "Roller Cleaning" screen appears. 3) Open the top cover. 4) Lightly press a soft cloth moistened with Cleaner F1 against the surface of the feed rollers. fi-6010N Network Scanner Operator's Guide...
  • Page 398 5) Press the [c] key on the keyboard. ⇒ The feed rollers will advance one step each time the [c] key is pressed. Lightly press a soft cloth moistened with cleaning fluid against the surface of the rotating rollers to clean them. Pressing the [c] key seven times will turn the roller one complete revolution.
  • Page 399 ATTENTION closed, document jams and feeding errors may occur. • When closing the top cover, do not slam it shut by pushing the touch panel as this may damage it. old both sides to close fi-6010N Network Scanner Operator's Guide...
  • Page 400: Cleaning The Lcd Touch Panel

    Cleaning the LCD Touch Panel To prevent the touch panel screen from becoming dirty, it should be regularly cleaned with a soft, dry cloth. Take care when cleaning the touch panel. It can be easily damaged, and should never be scratched or banged with hard objects.
  • Page 401: Cleaning The Keyboard/Keyboard Cover

    Replace the keyboard cover if stains cannot be removed by cleaning. For more details, refer to "7.7 Replacing the Keyboard Cover" (page 376). To obtain a keyboard cover, contact your FUJITSU dealer or an authorized FUJITSU scanner ser- vice provider. Part name Part No.
  • Page 402: Cleaning The Carrier Sheet

    Cleaning the Carrier Sheet If the surface or interior of the Carrier Sheet becomes dirty or dusty, use a soft dry cloth slightly moistened with Cleaner F1 (sold separately) or a mild detergent, to lightly wipe off the dirt and dust.
  • Page 403: Replacing Parts

    • Use only the PFU LIMITED parts specified. Do not use consumable parts made by other manufacturers. To obtain these parts, contact your FUJITSU dealer or an authorized FUJITSU scanner service provider. fi-6010N Network Scanner Operator's Guide...
  • Page 404: Part Numbers And Replacement Cycle For Carrier Sheet

    If parts become noticeably dirty, replace them accordingly. Use only the PFU LIMITED parts specified. Do not use parts made by other manufacturers. ATTENTION To obtain these parts, contact your FUJITSU dealer or an authorized FUJITSU scanner service provider.
  • Page 405: Checking The Consumable Alert Status

    For details on how to check the status of consumable parts on the administrator screen, refer "4.8.2 Viewing the Usage Status" (page 134). 3. Replace the part. Part replacement procedures are detailed in the following sections, "7.6.3 Replacing the Pad Assembly" (page 370), "7.6.4 Replacing the Pick Roller" (page 371). fi-6010N Network Scanner Operator's Guide...
  • Page 406: Replacing The Pad Assembly

    7.6.3 Replacing the Pad Assembly 1. Remove any documents from the ADF paper chute. 2. Push the ADF release button, then hold both sides of the top cover and lift it open. Be careful that the top cover does not shut on your fingers. ATTENTION 3.
  • Page 407: Replacing The Pick Roller

    2. Remove the ADF paper chute. 3. Push the ADF release button, then hold both sides of the top cover and lift it open. Be careful that the top cover does not shut on your fingers. ATTENTION fi-6010N Network Scanner Operator's Guide...
  • Page 408 4. Remove the pick roller and its shaft from the scanner. 1. Squeeze the tabs of the sheet guide release catch together with your fingers, and lift the sheet guide plate up and away. 2. Rotate the left side pick roller bushing in the direction indicated by the arrow. Pick roller bushing Pick roller shaft 3.
  • Page 409 ATTENTION You should hear a "click" when the pick roller shaft is inserted cor- rectly. Make sure you hear this noise when inserting the shaft into the pick roller. "Click" fi-6010N Network Scanner Operator's Guide...
  • Page 410 7. Insert the pick roller and shaft back in the scanner. To attach the pick roller to the scanner, follow the pick roller and shaft removal procedure in reverse. 1. Rotate the left side pick roller bushing in the direction indicated by the arrow. Pick roller bushing Pick roller shaft 2.
  • Page 411: Purchasing The Carrier Sheet

    However, the number of times of use differs according to usage. Replace the Carrier Sheet when it becomes scratched or dirty. The Carrier Sheet is as shown below: To obtain the Carrier Sheet, contact your FUJITSU dealer or an authorized FUJITSU scanner ser- vice provider. fi-6010N Network Scanner Operator's Guide...
  • Page 412: Replacing The Keyboard Cover

    Replacing the Keyboard Cover 1. Remove the keyboard cover from the scanner. 2. Remove any remaining adhesive tape. Pay particular attention to these areas 3. Turn the keyboard cover over and remove the paper backing from the top strip of dou- ble-sided tape.
  • Page 413 5. Flip up the keyboard cover and remove the paper backing from the bottom strip of double-sided tape. Flip up the Paper keyboard cover backing tape 6. Gently stretch the keyboard cover forward and smooth the double-sided tape down. Bottom attachment area fi-6010N Network Scanner Operator's Guide...
  • Page 414: Performing A Scan Test

    Performing a Scan Test After scanner cleaning or replacement of consumable parts, perform a scan test. 1. On the "Main Menu" screen, press the [Maintenance] button. ⇒ The "Maintenance" screen appears. 2. Press the [Scan Test] button. ⇒ The "Scan Test" screen appears. 3.
  • Page 415 When the scan test has completed, the "Scan Viewer" screen appears. If the scanner fails to scan correctly, an error message is displayed. For more details about how to deal with error messages, refer to "E.2 Regular User Messages" (page 457). fi-6010N Network Scanner Operator's Guide...
  • Page 416 5. Check the scanned data. For more details about "Scan Viewer", refer to "6.10.1 Viewing a Scanned Page" (page 343) "6.10.2 Rotating a Scanned Page" (page 344). 6. Press the [OK] button. ⇒ The "Maintenance" screen is shown again.
  • Page 417: Troubleshooting

    Troubleshooting This chapter provides information on dealing with scanner operation problems such as paper jams, points to check before contacting your FUJITSU scanner dealer, and help on how to check device labels. For details of error messages which may appear during administrator setting procedures, refer to "E.1.1 Administrator Screen Messages"...
  • Page 418: Removing Jammed Documents

    Removing Jammed Documents If a document jam occurs, follow the procedure below to remove the jammed documents. • When removing jammed documents, take care with dangling neckties, ATTENTION necklaces, etc. as they may easily become entangled in the scanner. • The glass scanner windows inside the ADF can become hot when the scanner is used.
  • Page 419 Make sure that the top cover is completely closed. If not completely closed, document jams and feeding errors may occur. • When closing the top cover, do not slam it shut by pushing the touch panel as this may damage it. old both sides to close fi-6010N Network Scanner Operator's Guide...
  • Page 420 • Although no error message is displayed, document pages may remain in HINT the ADF even after scanning is completed or canceled. Follow the proce- dure below to remove any such pages from the ADF. 1. Remove all documents from the ADF paper chute. 2.
  • Page 421 8.1 Removing Jammed Documents 3. Load the documents into the ADF paper chute, as shown in the following diagram. Cross section Documents ick roller fi-6010N Network Scanner Operator's Guide...
  • Page 422: Dealing With Detached Keycaps

    Dealing with Detached Keycaps If a keycap comes loose from the keyboard, fit it back onto its original location and push it down until it clicks into place. eycap If a keycap and key switch become loose, they should be reattached as follows. 1.
  • Page 423 If the detached keycap has a wire brace, reattach the wire to the keyboard, align HINT the keycap over the middle of the wire, and push the keycap down until it clicks into place. ush straight down Wire brace rotruding catch Keycap underside Clip wire ends into catch notches fi-6010N Network Scanner Operator's Guide...
  • Page 424: Network Connection Troubleshooting

    If the cause of the problem is unknown or the problem persists, check the items in "8.5 Points to Check before Contacting Your FUJITSU Scanner Dealer" (page 404) and contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
  • Page 425 131), change the [Link Speed/Duplex Mode] from "Auto- Negotiation" to a fixed mode. "Hardware error" The LAN cable may have become disconnected during the Ping test. Check the status of the LAN cable and try again. fi-6010N Network Scanner Operator's Guide...
  • Page 426: Checking The Network Operating Status

    ■ Checking the network operating status Check the network status. For details about the checking procedure, refer to "4.7.17 Checking the Network Operating Status" (page 131). Check the "Network Information" screen, and follow each action described below according to the message that is shown.
  • Page 427: Checking The Ntp Server Settings By Synchronizing The System Time

    • Check that the time is correct. If the time is incorrect, adjust the date/time, and try again. • Refer to "4.6.5 Setting the Date/Time" (page 59), adjust the date/time, and try again. fi-6010N Network Scanner Operator's Guide...
  • Page 428: Checking The Mail Server By Sending A Test Mail

    ■ Checking the mail server by sending a test mail On the "Alert Notification" screen, press the [Test] button to check if an e-mail can be sent to the specified destination. After pressing the [Test] button, follow each action described below according to the message that is shown.
  • Page 429: Other Network Connection Troubleshooting

    If the cause of the problem is unknown or the problem persists, check the items in "8.5 Points to Check before Contacting Your FUJITSU Scanner Dealer" (page 404) and contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
  • Page 430 Problem Action When using DHCP, the DHCP server does If using DHCP, on the "Network Status" not operate normally, or there is a problem screen, check that IP address, subnet with the DHCP server settings. mask, and default gateway settings are all correct.
  • Page 431: Failure To Connect To A Server Using Its Host Name Or Fqdn

    DNS or WINS server network If the DNS or WINS server is not func- connection. tioning, request the network administrator to check its status. fi-6010N Network Scanner Operator's Guide...
  • Page 432: Failure To Add A Network Printer

    ■ Failure to add a network printer If adding a network printer to/from the scanner is not possible, try the following steps. Also, refer to how to set printer settings, how to add a network printer, and the printer manual before hand. Problem Action The Windows®...
  • Page 433: Failure To Access The Scanner Using A Web Browser, Admin Tool, Or Central Admin Server

    "Tools" menu, "Internet Options". In the [Security] tab, select [Trusted sites]. Press the [Sites] button, enter the URL of the scanner in the "Add this website to the zone" field, and press the [Add] button. fi-6010N Network Scanner Operator's Guide...
  • Page 434 Problem Action In Microsoft® Internet When connecting using the scanner name, the connec- Explorer, in the "Tools" menu, tion will be an intranet connection. When connecting "Internet Options", [Security] using an IP address, it will be an internet connection. tab, the security level for the If the URL includes a scanner name, the scanner will corresponding zone is set as be connected using an Intranet Zone.
  • Page 435 Microsoft® Internet Explorer, then press the "Internet Options" - [Advanced] tab, "Settings" - "Security" section, select [Advanced] tab, the [Use SSL the "Use SSL 3.0" checkbox. 3.0] checkbox under "Set- tings" - "Security" section is not selected. fi-6010N Network Scanner Operator's Guide...
  • Page 436: Other Troubleshooting

    If the problem still cannot be solved after consulting the troubleshooting suggestions, check the points in "8.5 Points to Check before Contacting Your FUJITSU Scanner Dealer" (page 404) then contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Problem Check item...
  • Page 437 355). Scanned data Has the document been loaded cor- Load the document correctly. appears skewed or rectly? distorted. Quality of scanned Are the glass scanner windows dirty? Clean the glass scanner windows. data is poor. fi-6010N Network Scanner Operator's Guide...
  • Page 438 If the password has been lost or forgot- ten, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. The "Keyboard After turning the scanner off, was the Disconnect the AC cable from the scan-...
  • Page 439 Was the [Yes] button selected on the Close the screen and try connecting network. "Security Warning" dialog box when again. Select the [Yes] button on the connecting with HTTPS? "Security Warning" dialog box when connecting. fi-6010N Network Scanner Operator's Guide...
  • Page 440: Points To Check Before Contacting Your Fujitsu Scanner Dealer

    Points to Check before Contacting Your FUJITSU Scanner Dealer Before contacting your FUJITSU scanner dealer or an authorized FUJITSU scanner service pro- vider, check the following points. 8.5.1 General Details Info Findings Model fi-6010N Serial No. (Example) 000001 For the serial number, refer to "8.6 Checking the Scanner Labels"...
  • Page 441: Error Status

    8.5 Points to Check before Contacting Your FUJITSU Scanner Dealer 8.5.2 Error Status ■ Problem when connecting to the scanner via personal computer Info Findings OS (Windows) Admin tool version Displayed error message ■ Document feed trouble Info Findings Document type...
  • Page 442: Problem With Central Admin

    ■ Problem with Central Admin Info Findings Type of OS (Windows) for Central Admin Server software Type of OS (Windows) for Central Admin Console Central Admin Server software version Central Admin Console version Displayed error message ■ Other problems Info Findings Can both the original document and scanner image Circle one:...
  • Page 443: Checking The Scanner Labels

    The following diagrams show where the labels are located on the scanner. Label A Label B • Label A (example): Contains various scanner information. • Label B (example): Indicates the various standards that the scanner conforms to. fi-6010N Network Scanner Operator's Guide...
  • Page 444: Pre-Maintenance Preparations

    Pre-Maintenance Preparations Before sending the scanner for maintenance, the user data store and system settings should be backed up. Refer to the following sections for details: • "Backing up the User Data Store" from "4.10.1 Maintaining the User Data Store" (page 143)"...
  • Page 445: Appendix A Adf Paper Specifications

    This appendix describes the paper size and quality requirements for ensuring that the ADF operates correctly when scanning documents. A.1 Paper Size ......................410 A.2 Paper Requirements................... 411 A.3 Maximum Document Loading Capacity ............414 A.4 Area not to be Perforated .................. 415 A.5 Multifeed Detection Conditions................. 416 fi-6010N Network Scanner Operator's Guide...
  • Page 446: Paper Size

    A.1 Paper Size The following paper sizes can be scanned with this scanner: Width: 52mm to 216mm (2.1in to 8.5 in) Length: 74mm to 356mm(*) (2.9in to 14in) * When "Custom" paper size setting is used, a page length of up to 863mm (34in) is allowed for document scanning.
  • Page 447: Paper Requirements

    • Documents on which the ink is still wet • Documents smaller than A8 Portrait • Documents wider than Letter size (8.5inches = 216mm, A4 is 210mm wide) • Non-paper documents (such as fabric, foil, transparent paper) fi-6010N Network Scanner Operator's Guide...
  • Page 448 • Carbonless paper contains chemical substances that may damage the pad ATTENTION assembly or the pick and other rollers when documents are fed. Pay atten- tion to the following: Cleaning: If pick errors occur frequently, clean the pad assembly and pick roller. For details on cleaning the pad assembly and pick roller, refer to "Chap- ter 7 Scanner Care"...
  • Page 449 Material: PVC (polyvinyl chloride) or PVCA (polyvinyl chloride ace- tate) • Cards that are excessively stiff may not be fed smoothly by the ADF. • Cards that have become dirty from handling should be wiped clean before scanning. fi-6010N Network Scanner Operator's Guide...
  • Page 450: Maximum Document Loading Capacity

    A.3 Maximum Document Loading Capacity The maximum number of sheets that can be loaded into the ADF paper chute is determined by the length and weight of the document paper. The following graph shows the maximum document loading capacity of ADF according to paper size and weight.
  • Page 451: Area Not To Be Perforated

    ADF feed problems can occur while scanning if the document has any holes (punched, etc) in the shaded area shown in the following figure. 17.5mm 17.5mm Page top Front side Feed direction Page bottom Center of paper fi-6010N Network Scanner Operator's Guide...
  • Page 452: Multifeed Detection Conditions

    A.5 Multifeed Detection Conditions There are three multifeed detection modes: document layer, document length, and both document layer and length. The following conditions must be satisfied in each of these detection modes. The type of document and document conditions can cause the multifeed detection rate to drop. A.5.1 Detection by Layer If [Ultrasonic] is selected in "6.8.17 Multifeed Detection (Layer and Length)"...
  • Page 453: Detection By Both Layer And Length

    Setup" screen. • Multifeed may not be detected for the top and bottom 25mm of a document. Area where multifeed detection is possible 17.5mm 17.5mm Page top Front side Feed direction Page bottom Center of paper fi-6010N Network Scanner Operator's Guide...
  • Page 455: Appendix B Management Settings And Files

    Appendix B Management Settings and Files This appendix describes the scanner operating environment and management settings and files. B.1 e-Mail Address Setting Values ................420 B.2 Scanner Configuration File Format ..............421 fi-6010N Network Scanner Operator's Guide...
  • Page 456: E-Mail Address Setting Values

    B.1 e-Mail Address Setting Values e-Mail addresses may be up to 256 characters long. One of the following e-mail address for- mats must be used: • XXXXXXX@IP_address • XXXXXXX@Host_name • XXXXXXX@Domain_name XXXXXXX Comprised of alphanumerics and the following symbols. ! # $ % & ' * + - / = ? ^ _ ` { | } ~ . However, periods (.) cannot be used in the following cases.
  • Page 457: Scanner Configuration File Format

    Comment Up to 256 characters long Optional System Updates 0: Enable (default) Optional 1: Disable (*1): The following character strings cannot be used: (Default) (All) __default__ __all__ "__" is two underbars entered one after another. fi-6010N Network Scanner Operator's Guide...
  • Page 458: Scanner Configuration File Format (For Exporting)

    B.2.2 Scanner Configuration File Format (for Exporting) This section describes the scanner configuration file format requirements for exporting. • The file charset should be the same as the value on the Central Admin Console, "Central Admin Server Settings" screen. The default charset is UNICODE (UTF-8). •...
  • Page 459 Status 1: Finished 2: Pending 3: Error 4: Unknown Scanner Version — Pad Assembly Numerical value Pick Roller Numerical value Total Throughput Numerical value Date of Registration YYYYMMDD hh:mm:ss Cumulative On Numerical value Time fi-6010N Network Scanner Operator's Guide...
  • Page 461: Appendix C Root Certification Authority

    Appendix C Root Certification Authority This appendix provides an explanation of root certification authority. C.1 Root Certification Authority List ............... 426 fi-6010N Network Scanner Operator's Guide...
  • Page 462: Root Certification Authority List

    C.1 Root Certification Authority List The following root certification authorities are registered in the scanner. Valid until... Issuer (YYYY/MM/DD) ABA.ECOM Root CA 2009/7/10 Autoridad Certificadora de la Asociacion Nacional del Notariado 2009/6/29 Mexicano, A.C. Autoridad Certificadora del Colegio Nacional de Correduria Publica 2009/6/30 Mexicana, A.C.
  • Page 463 NetLock Expressz (Class C) Tanusitvanykiado 2019/2/20 NetLock Kozjegyzoi (Class A) Tanusitvanykiado 2019/2/20 NetLock Uzleti (Class B) Tanusitvanykiado 2019/2/20 PTT Post Root CA 2019/6/26 Saunalahden Serveri CA 2019/6/26 Secure Server Certification Authority 2010/1/8 SecureNet CA Class A 2009/10/16 fi-6010N Network Scanner Operator's Guide...
  • Page 464 Valid until... Issuer (YYYY/MM/DD) SecureNet CA Class B 2009/10/16 SecureNet CA Root 2010/10/16 SecureNet CA SGC Root 2009/10/16 SecureSign RootCA1 2020/9/15 SecureSign RootCA2 2020/9/15 SecureSign RootCA3 2020/9/15 SERVICIOS DE CERTIFICACION - A.N.C. 2009/3/10 SIA Secure Client CA 2019/7/9 SIA Secure Server CA 2019/7/9 Swisskey Root CA 2016/1/1...
  • Page 465: Appendix D Scanner Specifications

    Appendix D Scanner Specifications This appendix gives specifications for the scanner as a whole, and for scanner parts. D.1 Device Specifications..................430 D.2 Scanner Specifications ..................431 fi-6010N Network Scanner Operator's Guide...
  • Page 466: Device Specifications

    D.1 Device Specifications Item Specification Dimensions (W × D × H) 315mm × 415mm × 281mm Power consumption (AC) Weight 13kg LCD touch panel 8.4-inch XGA TFT LCD monitor Analog resistive touch panel Keyboard 101 keyboard Network interface LAN (10Base-T/100Base-TX) Input power AC100-240V±...
  • Page 467: Scanner Specifications

    Optical resolution 600 dpi Output resolution 150 dpi, 200 dpi, 300 dpi, 600 dpi Grayscale level 1024/256 levels (internal/external) (*1): The maximum hardware limitation. Actual scanning time includes software processing time such as data transfer time. fi-6010N Network Scanner Operator's Guide...
  • Page 469: Appendix E Operation Messages

    This appendix provides information about messages which may appear during scanner operations, and how to deal with them. E.1 Administrator Messages ..................434 E.2 Regular User Messages ..................457 E.3 Central Admin Messages ................... 502 fi-6010N Network Scanner Operator's Guide...
  • Page 470: Administrator Messages

    E.1 Administrator Messages The following messages may appear during administrator operation. Messages are displayed in the form of a dialog box as follows. The following table describes the types of marks which may appear in a message dialog box. Marks Description Warning message.
  • Page 471: Administrator Screen Messages

    Change the language setting back imported. The language of the scanner to the language at the time of settings file must be the same as the backup, and try restoring the user current language setting. data again. fi-6010N Network Scanner Operator's Guide...
  • Page 472 Screen Message Action Scanner Name Scanner name contains invalid charac- Re-enter the scanner name using ters. only specified valid characters. Do not enter a blank space before or after the scanner name. Do not use control characters or any of the following symbols: "...
  • Page 473 Central Admin connection environment. server. Invalid address has been specified. Enter a valid address, and try again. DNS Server DNS suffix contains invalid charac- Re-enter the DNS suffix using ters. only specified valid characters. fi-6010N Network Scanner Operator's Guide...
  • Page 474 Screen Message Action NTP Server System time synchronization failed. Try the following: • Check the NTP server IP address, host name, and FQDN settings. • Check the network path between to the NTP server for problems. • The NTP server may be busy. Wait a short time before trying again to synchronize the system time.
  • Page 475 Specified user is no longer able to The specified user account has login to this network printer. expired. Try the following: • Login with a different account. • Contact a network administrator to have the account validated. fi-6010N Network Scanner Operator's Guide...
  • Page 476 Screen Message Action Network Specified password is no longer valid Specified password was expired. Printer for this network printer. Try the following: • Login with a different account. • Contact a network administrator to have the password validated again. Specified user needs to renew their Change the password before log- password for this network printer.
  • Page 477 Length of specified network folder Select a different network folder path exceeds the maximum selectable and try again. path length. This folder may not be selected. Cannot acquire network information. Contact an administrator for the specified server. fi-6010N Network Scanner Operator's Guide...
  • Page 478 Screen Message Action Network Specified user is no longer able to The specified user account has Folder login to this network folder. expired. Try the following: • Login with a different account. • Contact a network administra- tor to have the account vali- dated.
  • Page 479 • If the only the SMTP server cannot connect to the net- work, request the network administrator to check that the SMTP server and the network connection to the server are functioning nor- mally. fi-6010N Network Scanner Operator's Guide...
  • Page 480 AC cable and try turning the power back on again. If the error status persists, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. Usage Status Cannot read data from a scanner unit.
  • Page 481 Change the language setting back language of the backup file must be to the language at the time of the same as the current language set- backup, and try restoring the user ting. data again. fi-6010N Network Scanner Operator's Guide...
  • Page 482 Check the network status. Common Error: problem with XXXXXX. Contact your FUJITSU scanner Contact your FUJITSU scanner dealer dealer or an authorized FUJITSU or an authorized FUJITSU scanner scanner service provider. service provider. Error code=xxxxxxx...
  • Page 483 Close the Job Settings session, and Job Settings session, then try again. If try again. the problem persists, the administra- tor should contact the FUJITSU scan- ner dealer or an authorized FUJITSU scanner service provider for help. Insufficient memory to continue.
  • Page 484 Screen Message Action LDAP LDAP search base setting is invalid. Correct the LDAP settings. Connection LDAP server is busy. Wait for a while, and try again. Search has timed out. Contact a sys- Contact a system administrator. tem administrator. Number of matches has reached the Refine the search conditions, and maximum allowed.
  • Page 485: System Log Messages

    User data store was cleared. 01000012 System time was synchronized suc- cessfully. 01000013 System settings restoral completed. 01000014 Technical support data was prepared for download. 01000015 Add-in module was installed success- fully. Add-in: xxxxxx Version: xxxxxx fi-6010N Network Scanner Operator's Guide...
  • Page 486 Code Message Action 01000016 Add-in module was uninstalled suc- No action required. cessfully. 01000017 System settings restoral started. 0C010001 Created new Job. Job name: XXXXXX 0C010002 Copied existing Job. Job name: XXXXXX Source name: YYYYYY 0C010003 Edited Job. Job name: XXXXXX 0C010004 Deleted Job.
  • Page 487: Error

    Specified IP address is already being and try again. used. DHCP = Off IP Address = xxx.xxx.xxx.xxx Subnet Mask = xxx.xxx.xxx.xxx Default Gateway = xxx.xxx.xxx.xxx 7C040001 LDAP search base setting is invalid. Check the search base settings. Search base: XXXXXX fi-6010N Network Scanner Operator's Guide...
  • Page 488: Warning

    Code Message Action 7C040002 LDAP server is busy. Try the following: Search base: XXXXXX • Wait for a while, and try again. • Contact a server administrator to check LDAP server opera- tion. 7C040003 Search has timed out. Contact a sys- Contact a server administrator to tem administrator.
  • Page 489: Alert Monitor System Log Messages

    No action required. Scanner alert monitor start date/time = MM/dd/yyyy HH:mm:ss 01001015 Scanner alert monitor stopped. 01001016 Scanner alert monitor stopped by sys- tem standby mode. 01001017 Scanner alert monitor restarted after resume from standby. fi-6010N Network Scanner Operator's Guide...
  • Page 490: Error

    Alert Notifications" (page 128). Code Message Action 81000001 CPU power supply error. Contact your FUJITSU scanner dealer or an authorized FUJITSU 81000002 1.5V power supply error. scanner service provider. 81000003 3.3V power supply error. 81000004 5V power supply error.
  • Page 491 SMTP server and the network connection to the server are functioning nor- mally. 81002004 Device monitoring service error. Contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. fi-6010N Network Scanner Operator's Guide...
  • Page 492: Warning

    ■ Warning The following table gives a summary of system log warning messages which may be received from the scanner alert monitoring service. The messages shown here are sent to the e-mail address specified in "4.7.15 Setting the Destination for Alert Notifications" (page 128).
  • Page 493: Regular User Messages

    • Login is not possible if the Active Directory account option is "User must change password at next logon". Contact an administrator to set a password, and then try logging in. fi-6010N Network Scanner Operator's Guide...
  • Page 494 • Check that the cables are con- again. The administrator should con- nected to the scanner properly. tact the FUJITSU scanner dealer or an • If the scanner does not restart authorized FUJITSU scanner service automatically, press the [Shut- provider for help down] button on the "Login"...
  • Page 495 Replace Soon Replace the consumable part when Alert convenient. For details, refer to "7.6 Replacing Parts" (page 367). Replace Now Replace the consumable part when convenient. For details, refer to "7.6 Replacing Parts" (page 367). fi-6010N Network Scanner Operator's Guide...
  • Page 496 Screen Message Action Scanning Document not found. Load a docu- Load the document into the ADF ment into the ADF, making sure the paper chute, and try again. Load side guides are adjusted correctly and the document to prevent any space try again.
  • Page 497 • Reduce the size of the scan data lem persists, the administrator should or set a lower resolution level, contact the FUJITSU scanner dealer or and try again. an authorized FUJITSU scanner ser- • If the scanner does not restart...
  • Page 498 If the problem persists, the sists, the administrator should con- administrator should contact the tact the FUJITSU scanner dealer FUJITSU scanner dealer or an autho- or an authorized FUJITSU scanner rized FUJITSU scanner service pro- service provider for help.
  • Page 499 Size" (page 312). Paper jam has occurred. Remove the Try the following: documents from the ADF and try • Remove the documents from again. the ADF. • Remove the pages which were not scanned correctly. fi-6010N Network Scanner Operator's Guide...
  • Page 500 • Check that the cables are con- again. The administrator should con- nected to the scanner properly. tact the FUJITSU scanner dealer or an • If the scanner does not restart authorized FUJITSU scanner service automatically, press the [Shut- provider for help.
  • Page 501 Network is busy. Try again later. Wait for a while, and try again. Cannot find the network printer path. Try the following: • Contact a server administrator. • Check that the spooler is operat- ing properly. fi-6010N Network Scanner Operator's Guide...
  • Page 502 Screen Message Action Print Not connected to the network. Check that the system network is functioning normally by perform- ing a ping test from another machine in the network, other than the server with network printer. If the system network is not operating properly, refer to "Failure to connect to a server using its IP address"...
  • Page 503 Invalid No. of copies. Enter a value Enter a valid No. of copies. between 1 and 99, and try again. Only numbers 1 to 99 can be used. fi-6010N Network Scanner Operator's Guide...
  • Page 504 Screen Message Action Print Server User name is required. Enter a user name. Authentication Network is busy. Try again later. Wait for a while, and try again. User name or password may be incor- Re-enter the user name and pass- rect.
  • Page 505 "8.3 Network Connection Trou- bleshooting" (page 388) Error: network printer could not be Contact a network administrator to accessed. check whether the network printer can be accessed. fi-6010N Network Scanner Operator's Guide...
  • Page 506 Screen Message Action Save User name or password may be incor- Try the following: rect. • Directly enter a valid user name and password. • Check that the proxy server is operating properly. • Contact an administrator to check that the IP address set- tings, FTP server network folder, or proxy server settings are correct.
  • Page 507 2GB. If the size of the Scan Viewer until the total file scanned data exceeds 2GB, no MTIFF size of the scanned data is less than 2GB. files can be created. • Increase the compression level and try scanning again. fi-6010N Network Scanner Operator's Guide...
  • Page 508 Screen Message Action File Server User name or password may be incor- Try the following: Authentication rect. • Directly enter a valid user name and password. • Check that the proxy server is operating properly. • Contact an administrator to check that the IP address set- tings, FTP server network folder, or proxy server settings...
  • Page 509 • Enter a valid user name and password. LDAP server response error. Try the following: • Contact a system administrator to check whether the LDAP server is available. • Set a valid user name and pass- word. fi-6010N Network Scanner Operator's Guide...
  • Page 510 If problem persists, the administrator should con- tact a FUJITSU scanner dealer or an authorized FUJITSU scanner service provider for help. [alphanumeric eight digits]...
  • Page 511: System Log Messages

    Scanner will be shutdown. No action required. 01131002 Scanner entered standby mode. No action required. 03080001 Scanner firmware has been No action required. updated. Scanner firmware version: XXXX 05050000 Add-in module loaded success- No action required. fully. fi-6010N Network Scanner Operator's Guide...
  • Page 512 Code Message Action 05050001 Add-in module operation No action is required. However, the finish started. status of the Add-in module will also be displayed later on. 1.Operation started. Add-in Module Scanner 2.Operation finished. 1. "1. Operation started" message • 05050001 "2.
  • Page 513: Warning

    11040003 Cannot find the network folder Contact a network administrator to check path. server status. 11040005 Insufficient free space in the Ensure the free space requirements are met, and try again. designated network folder. fi-6010N Network Scanner Operator's Guide...
  • Page 514 Code Message Action 11080001 Number of user data stores has To have the user data store cleared, contact reached the maximum allowed. a system administrator. New users may not login until Clearing the user data store is not an undo- the old user data stores are able action.
  • Page 515 No more may be again. specified. 110D0006 Invalid LDAP Search Base for- Contact a system administrator to have the mat. LDAP search base format corrected. "4.7.8 Setting the Login LDAP Server" (page 88) fi-6010N Network Scanner Operator's Guide...
  • Page 516 Code Message Action 110D0007 Current login (LDAP account) Contact a system administrator to have the has become invalid. login account validated. 110D0008 The file to be overwritten may Check that the file to be overwritten is be in use elsewhere. closed, and try again.
  • Page 517 System log file was deleted because the deleted. scanner was turned off during operations. No action required. 11150002 Corrupted user log file was User log file was deleted because the scan- deleted. ner was turned off during operations. No action required. fi-6010N Network Scanner Operator's Guide...
  • Page 518 Code Message Action 12010001 Scanned data size exceeded Try the following: maximum size allowed for • Reduce the number of pages to be e-mail attachments. scanned and send the e-mail in separate parts. • Select a higher compression level and try again.
  • Page 519 • Select a higher compression level, and try again. "6.8.9 Compression" (page 325) If the problem persists, contact a system administrator to check the "Maximum Attachment Size" setting. "4.7.11 Setting the e-Mail Server (SMTP Server)" (page 100) fi-6010N Network Scanner Operator's Guide...
  • Page 520 Code Message Action 12020002 Could not connect to server Try the following: when sending fax. • Check that the LAN cable of the scanner and SMTP server is connected properly. • Contact a system administrator to check that the scanner IP address, SMTP server and fax server settings are cor- rect.
  • Page 521 If the system network is not operating correctly, refer to "Failure to connect to a server using its IP address" (page 393) for further solutions. fi-6010N Network Scanner Operator's Guide...
  • Page 522 Code Message Action 1203000A Number of network path Close unneeded network connections, then try specifying the desired network path connections has reached the again. maximum allowed. No more may be specified. 1203000C Specified user is no longer able Try the following: to login to this network printer.
  • Page 523 • Contact a system administrator to check whether or not access to the network folder is permitted for the currently logged in user or authenticated user. • Check if the file attribute has been set as hidden. fi-6010N Network Scanner Operator's Guide...
  • Page 524 Code Message Action 12040003 File already existed, so data To overwrite the existing file, on the could not be saved. "Save" screen, set "Overwrite old files?" as "Yes", and try again. 12040005 Network is busy. Try again Try again later. later.
  • Page 525 12040010 Access to network folder was Try the following: refused. Login is not possible at • Try again when login is possible. this time. • Contact a network administrator to have the time setting changed. fi-6010N Network Scanner Operator's Guide...
  • Page 526 [Shutdown] button on the "Login" screen, disconnect the AC cable and try turning the power back on again. If the error status persists, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. 1306002C Insufficient memory.
  • Page 527 Shutdown and press the startup button to File name: XXXX restart the scanner.If the error status per- 13061002 Error code: XXXX sists, contact your FUJITSU scanner dealer 13061003 or an authorized FUJITSU scanner service provider. 13080001 Scanner firmware update failed.
  • Page 528 84000002 An error has occurred. The sys- If the problem persists, the administrator tem must be restarted. Any should contact a FUJITSU scanner dealer buffered jobs will be canceled. or an authorized FUJITSU scanner service If problem persists, the admin- provider.
  • Page 529: User Log

    12010005 e-Mail size exceeded maxi- Contact a system administrator to check mum e-mail size allowed by the the maximum e-mail size allowed by the SMTP server. SMTP server. fi-6010N Network Scanner Operator's Guide...
  • Page 530 Code Message Action 12010006 SMTP server connection was Try the following: lost while sending e-mail. • Check that the LAN cable of the scan- ner and SMTP server is connected prop- erly. • Contact a system administrator to check that the scanner IP address and SMTP server settings are correct.
  • Page 531 "8.3 Network Connection Troubleshoot- ing" (page 388) • Contact a system administrator to check that the SMTP server is working prop- erly. • Contact a system administrator to check the maximum e-mail size allowed by the SMTP server. fi-6010N Network Scanner Operator's Guide...
  • Page 532 Code Message Action 12020100 Error: fax could not be sent. Try the following: • Contact a system administrator to check if sending fax is allowed. • If the [e-Mail address of user] option button is selected for "Notification To (Sender's e-Mail Address)", an error will occur when a job sequence is per- formed in the following cases: •...
  • Page 533 • Contact a network administrator to find out if an access permit has been set. • Contact a system administrator to check that the scanner IP address and network printer settings are correct. "8.3 Network Connection Trouble- shooting" (page 388) fi-6010N Network Scanner Operator's Guide...
  • Page 534 Code Message Action 12030100 Error: could not print. Try the following: • Check that the LAN cable of the scanner and file server is connected properly. • Contact a system administrator to check that the scanner IP address and regis- tered network printer path settings are correct.
  • Page 535 • Contact a network administrator to have the account validated. 1204000D Specified password is no longer Try the following: valid for this network folder. • Login with a different account. • Contact a network administrator to have the password validated again. fi-6010N Network Scanner Operator's Guide...
  • Page 536 Code Message Action 1204000E Specified user needs to renew Try the following: their password for this network • Login with a different account. folder. • Contact a network administrator to have the password changed. 1204000F Access to network folder was Contact a network administrator to have refused.
  • Page 537 F4CA0000 again. The administrator should If the error status persists, contact your F4EF0000 contact the FUJITSU scanner FUJITSU scanner dealer or an authorized dealer or an authorized FUJITSU scanner service provider. F2010002 FUJITSU scanner service pro- F2020002 vider for help.
  • Page 538: Central Admin Messages

    E.3 Central Admin Messages The following messages may appear during central admin operations. E.3.1 Central Admin Console Messages Screen Message Action Connect Check the port number setting. Enter a port number. Check the target server setting. Enter a target server. Connection error.
  • Page 539 Ensure that there are no duplica- address. tions in scanner configuration files. Scanner No more WakeOnLAN packets may Wait for a few minutes, and try Details be sent at this time. again. Wait, then try again. fi-6010N Network Scanner Operator's Guide...
  • Page 540 Screen Message Action System File format is not valid. Specify a valid file. Updates Specified file does not exist or is Specify a valid update file. The empty. error may also occur if the author- ity to access the file does not exist. A date/time within one month from Specify a valid update call date/ now must be specified.
  • Page 541 • 500: SQL server instance is not running • 503: Application pool is not running • 12007: Network error • 12029: Cannot communicate with Web site (AmConsole) • 12031: Network error fi-6010N Network Scanner Operator's Guide...
  • Page 542: System Log Messages

    E.3.2 System Log Messages System log messages which may appear during central admin operations can be arranged into the following three categories: • Information • Warning • Error System log messages are shown in the scanner system log. ■ Information Code Message Action...
  • Page 543: Error

    Admin Server" screen on the [Network Settings] tab. If the scanner's server-side status is "Unregistered", check the address and the port number of the Central Admin Server, and register the scanner on the Central Admin Server. fi-6010N Network Scanner Operator's Guide...
  • Page 544 Code Message Action 7B020050 Add-in update failed. Refer to Error Code "7B020001" (page 507). 7B020051 System update failed. Update is not complete. 7B020038 Scanner settings could not be applied. If the "Status Details" window in Central Admin Console displays "Error" status for the scanner, clear the error.
  • Page 545 To use the job mode settings, they must be downloaded from the Central Admin Server. After dealing with the error, re-login using Central Admin Console and try again. fi-6010N Network Scanner Operator's Guide...
  • Page 546 DHCP settings (restricted number of leases or MAC address validation) may be causing invalid IP addresses to be assigned. If there are no problems with the items described above, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
  • Page 547 Code Message Action 7B020025 Contact with Central Admin server An error occurred. failed. Contact your FUJITSU scanner dealer or an authorized FUJITSU 7B020026 Contact with Central Admin server scanner service provider. failed. fi-6010N Network Scanner Operator's Guide...
  • Page 548: Event Log

    E.3.3 Event Log ■ System Event Log The system event log shows a list of all system events. • Log Type: Application • Event source: iScanner Central Admin Code Message Action 11001 iScanner Central Admin server started No action required. 11002 iScanner Central Admin server shut down.
  • Page 549 Check the status of updates to the scanner, and issue any necessary update calls to scanners with "Pending" status. 13904 Error has occurred. (XXXX) Restart the iScanner Central Admin service. fi-6010N Network Scanner Operator's Guide...
  • Page 550: Central Admin Console Event Log

    ■ Central Admin Console Event Log This displays the Central Admin Console event list. For message error details, only text up to the maximum character limit (256 characters) will be shown. Code Message Action 0A011001 No action required. New system update   This indicates whether or not the System_version has been [Scanner Notification Schedule:...
  • Page 551 Central Admin Server, "Central Admin" is set to "On", and the "Automatically add new scanners to the Central Admin configuration when they are dis- covered." checkbox is not selected, this message appears. fi-6010N Network Scanner Operator's Guide...
  • Page 552 Code Message Action 6A012002 Duplicate scanner name. Scanner Change the scanner name or delete name: XXXX MAC address: XXXX IP unneeded scanner data, and try address: XXXX again. This error may occur when the MAC address is changed in the maintenance process.
  • Page 553: Backup/Restore Command Messages

    7A040013 Backup folder contents are The backup folder specified in the parame- invalid. ter for the restore command is not a backup folder for Central Admin. Specify the Central Admin backup folder and try again. fi-6010N Network Scanner Operator's Guide...
  • Page 554 If this message appears without auxiliary code, the contents of the problem are shown in the following format. Problem details If this message appears frequently with auxiliary code other than those mentioned above, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
  • Page 555 Problem details If this message appears frequently with auxiliary code other than those mentioned above, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider. 7A040019 Backup or restore is already Try again, after finishing the backup or res- toration.
  • Page 557: Appendix F Glossary

    Appendix F Glossary fi-6010N Network Scanner Operator's Guide...
  • Page 558: Canadian Doc Regulations

    A4 size A standard international paper size. (210 × 297mm / approximately 8.27 × 11.7inches) A5 size A standard international paper size. (148 × 210mm / approximately 15.83 × 8.27inches) A6 size A standard international paper size. (105 × 148mm / approximately 14.13 × 5.83inches) ADF (Automatic Document Feeder) A unit that allows the user to scan a number of pages consecutively.
  • Page 559: Default Settings

    Feed roller Rollers that feed documents through the ADF. Idler roller Rollers that feed documents through the ADF. Interface The connection that allows communication from the computer to the scanner. fi-6010N Network Scanner Operator's Guide...
  • Page 560: Paper Jam

    Landscape orientation A document with its long side horizontal and its short side vertical. See also "Portrait orien- tation". LDAP (Lightweight Directory Access Protocol) A protocol for accessing a directory database over a TCP/IP network. Legal size A standard international paper size. (215.9 × 355.6mm / 8.5 × 14inches) Letter size A standard North American paper size.
  • Page 561: Ultrasonic Sensor

    A scan mode where only one side of each document sheet is scanned. See also "Duplex scan mode". Ultrasonic sensor A type of sensor that uses ultrasonic sound waves, in this case to detect document multifeeds by recognizing differences in how the sound penetrates single versus multiple sheets. fi-6010N Network Scanner Operator's Guide...
  • Page 563: Index

    ..........357 area not to be perforated .......415 auto logout ............61 the ADF ..........358 the carrier sheet ........366 the keyboard ...........365 the keyboard cover .........365 background removal ........332 the LCD touch panel .......364 cleaning paper ..........356 fi-6010N Network Scanner Operator's Guide...
  • Page 564 cleaning wipe ..........356 duplex ............298 clearing the system log .........142 the user data store ........148 edge cropping ..........338 the user logs ..........139 editing color mode ............311 a contact in the e-mail address book ..275 common buttons and indicators ....256 a contact in the fax number list ....284 compression .........
  • Page 565 ..............74 via the Admin Tool ........48 operation logs ..........137 via the Central Admin Console ....207 operation messages ........433 via the touch panel ........37 operations ........... 7 logout ..............32 output tray ............5 long page ............314 fi-6010N Network Scanner Operator's Guide...
  • Page 566 regular user ............249 removing pad assembly ....6 a network folder ........126 PAD ASSY ...........367 a network printer ........113 page orientation ..........334 renaming paper quality ..........411 a network folder ........124 paper requirements ........411 a network printer ........112 paper size ........312 replacement cycle .........
  • Page 567 ..........148 the proxy server ........87 user log ..........137 the region/timezone ........58 user log summary ..........137 the scan options ........304 user principal name .........92 the time to standby mode ......61 the WINS server ........84 fi-6010N Network Scanner Operator's Guide...
  • Page 568 viewing a scanned page ........343 event log ..........242 scanner-side status ........239 the detailed settings for a job menu ..181 the status of consumable parts ....134 the system log details ......140 the system status ........133 the user log details ........137 WINS server ............16 wood containing paper ........412 Symbols [SCAN] button ..........5...
  • Page 569 Network Scanner Operator's Guide P3PC-2372-01ENZ0 Date of issuance: July, 2008 Issuance responsibility: PFU LIMITED The contents of this manual are subject to change without notice. PFU LIMITED is not liable whatsoever for any damages resulting from the use of this scanner and procedures described in this manual, profit loss due to defects, and any claims by a third party.

Table of Contents