Table of Contents
3
Overview of the installation steps
This chapter provides an overview of the steps necessary to install your server.
Links guide you to sections where you find more detailed information on
individual steps:
Ê Before you start, carefully read the safety instructions in chapter
information" on page
Ê Transport the server to the place where you want to install it.
Ê Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered correspond to the details on
the delivery note, see section
Ê The server includes loose parts. Keep these parts in a safe place. They are
designed to be used for installing optional components at a later time.
Ê Make sure that all manuals are available that are listed in section
"Documentation overview" on page
Ê Mount the server in the rack according to the instructions in section
"Installing/removing the server in/from the rack" on page
Ê Wire the server. Follow the instructions in the sections
to the server" on page 69
on page
75.
Ê Connect the server to the mains, see section
mains" on page
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server, see section
RX900 S2
39.
"Unpacking the server" on page
and
"Notes on connecting/disconnecting cables"
71.
"Control elements and indicators" on page
Operating Manual
12; print out the PDF files if required.
"Connecting the server to the
"Important
54.
55.
"Connecting devices
77.
37
- Quick Links:
- Configuring the Sas Raid Controller
Hide quick links:
Table of Contents
