Displaying The Atm Connection Traffic Table - Cisco Catalyst 8540 MSR Configuration Manual
Atm switch router software configuration guide
Hide thumbs
Also See for Catalyst 8540 MSR:
Table of Contents
Configuring Global Resource Management
The atm connection-traffic-table-row command supports these service categories: CBR, VBR-RT,
VBR-NRT, ABR, and UBR. To create or delete an ATM CTT row, perform the following tasks in global
configuration mode:
Your CTT feature set depends on the type of feature card that is installed on the Catalyst 8510 MSR and
Note
LightStream 1010 ATM switch routers route processor.
Command
Step 1
Switch(config)# atm
connection-traffic-table-row [index row-index]
{vbr-rt | vbr-nrt} pcr pcr-value {scr0 | scr10}
scr-value [mbs mbs-value] [cdvt cdvt_value]
Step 2
Switch(config)# atm
connection-traffic-table-row [index row-index]
cbr pcr pcr-value [cdvt cdvt-value]
Step 3
Switch(config)# atm
connection-traffic-table-row [index row-index]
abr pcr pcr-value [mcr mcr-value] [cdvt
cdvt-value]
Step 4
Switch(config)# atm
connection-traffic-table-row [index row-index]
ubr pcr pcr-value [mcr mcr-value] [cdvt
cdvt-value]
If you do not specify an index row number, the system software determines if one is free and displays it
in the allocated index field if the command is successful.
Example
The following example shows how to configure an ATM CTT row with an ABR peak cell rate of
30,000 kbps:
Switch(config)# atm connection-traffic-table-row abr pcr 30000
Allocated index = 63999
Displaying the ATM Connection Traffic Table
To display the CTT configuration, use the following EXEC command:
Command
show atm connection-traffic-table [row
row-index | from-row row-index]
Example
The following example shows how to display the CTT configuration table:
Switch> show atm connection-traffic-table
Row
1
ATM Switch Router Software Configuration Guide
9-12
Service-category
pcr
ubr
7113539
Chapter 9
Purpose
Configures an ATM CTT VBR row.
Configures an ATM CTT CBR row.
Configures an ATM CTT ABR row.
Configures an ATM CTT UBR row.
Purpose
Displays the CTT configuration.
scr/mcr
mbs
none
Configuring Resource Management
cdvt
none
OL-7396-01
Table of Contents
Troubleshooting
