Table of Contents
Cabling the CSS 11503 and CSS 11506 Modules
Cabling the CSS 11503 and CSS 11506 Modules
Cisco 11500 Series Content Services Switch Hardware Installation Guide
2-6
Table 2-1
CSS 11501 LED Descriptions (continued)
LED Name
Duplex
for Ethernet Port
Link /Act
for the Gigabit
Ethernet Port
The CSS 11503 and CSS 11506 modules have connectors and LEDs on their front
panels. The following sections describe:
CSS 11503 and CSS 11506 Module Overview
•
Switch Control Module Connectors and LEDs
•
Fast Ethernet Module Connectors and LEDs
•
Gigabit Ethernet Module Connectors and LEDs
•
•
Session Accelerator Module LEDs
Secure Socket Layer (SSL) Module LEDs
•
For information on the connector pinouts, refer to Appendix B,
Pinouts.
If you encounter problems with the modules in the CSS 11503 and CSS 11506,
see the
"Troubleshooting the CSS Modules"
Chapter 2
Color
State
Green
Off
On
Green
Off
On
Blinking
Cabling and Troubleshooting the CSS
Indicates
Port is operating at half duplex.
Port is operating at full duplex.
There is no link.
The link exists and
synchronization is achieved.
The link is established with
transmit or receive activity.
Cable Connector
section later in this chapter.
78-16421-01
Table of Contents
Troubleshooting
