Error display messages
Display
Hardware error.
Reboot or press reset
switch.
Read error
Cannot play this disc
Product servicing
If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorized
Panasonic Servicenter. The product should be serviced only by a qualifi ed technician.
Replacing the Fuse
Use fuses of the same specifi ed rating (15 A). Using different substitutes or fuses with higher rating, or connecting
the product directly without a fuse, could cause fi re or damage to this unit.
If the replacement of the fuse fails, contact your nearest Panasonic Servicenter for service.
Reset the system
If the unit fails to operate
Reset switch
Insert a hard, slender stick into the hole and push the
switch.
Possible cause
There was a malfunction in the amp.
Press the reset switch on the system.
Some mechanical or operation error has occurred.
If there is no response to pressing the eject button, restart the engine.
The inserted CD/DVD cannot be read.
Refer to "Discs that can be played back"
disc.
Some mechanical or operation error has occurred.
If there is no response to pressing the eject button, restart the engine.
Possible solution
(
follows)
(
page 7) and use the right kind of
IMPORTANT
Push the switch only when the unit fails to operate
with any buttons. (Stored settings and adjustments
are cleared.) If the unit fails to return to normal,
contact the nearest Panasonic Servicenter and have it
repaired.
Note:
If the ID code has been already set, you will be asked
to enter the ID code right after the unit is restarted.
A noise may occur when the reset switch is pressed,
but that does not indicate a malfunction.
105
105