Configuration Basics - Emerson Rosemount 2051 Reference Manual
Pressure transmitter with hart revision 5 and 7 selectable protocol
Hide thumbs
Also See for Rosemount 2051:
- Reference manual (228 pages) ,
- Quick start manual (34 pages) ,
- Quick installation manual (25 pages)
Table of Contents
Configuration
February 2024
Example
Table 2-1: Rosemount 2051 device revisions and files
Software
release
date
August
2012
January
1998
(1)
NAMUR software revision is located on the hardware tag of the device
(2)
Use a HART-capable configuration tool to find the HART software revision.
(3)
Device descriptor file names use Device and DD Revision, such as 10_01. HART protocol
is designed to enable legacy device descriptor revisions to continue to communicate
with new HART devices. To access new functionality, download the new DD. Emerson
recommends downloading new DD files to ensure full functionality.
(4)
HART Revision 5 and 7 selectable, safety certified, local operator interface (LOI), scaled
variable, configurable alarms, expanded engineering units.
2.3
Configuration basics
NOTICE
Set all transmitter hardware adjustments during commissioning to avoid exposing the
transmitter electronics to the plant environment after installation.
You can configure the transmitter either before or after installation. Configuring the
transmitter on the bench using either a communication device, AMS Device Manager, or
local operator interface LOI ensures all transmitter components are in working order prior
to installation. Verify that the security switch is set in the unlock ( ) position in order to
proceed with configuration.
2.3.1
Configuring on the bench
To configure on the bench, required equipment includes a power supply and a
communication device, AMS Device Manager, or a local operator interface (LOI) (option
).
M4
Wire equipment as shown in
resistance of at least 250 Ωs must be present between the transmitter and the power
supply. Connect the communication device leads to the terminals labeled
the terminal block or 1–5 V configuration, wire as shown in
communication device to the terminals labeled
12
Identify device
NAMUR
HART
software
software
revision
(1)
revision
(2)
1.0.0
01
N/A
178
Figure
2-1. To ensure successful HART
Find DD
HART
Device
universal
revision
(3)
revision
7
10
5
9
5
3
Figure
.
VOUT/COMM
Reference Manual
00809-0100-4107
Review
Review
instructions
functionality
Reference
Changes to
manual
software
Rosemount
(4)
2051
Reference
Manual
Rosemount
N/A
2051
Reference
Manual
communication, a
®
on
COMM
2-1. Connect the
Rosemount 2051
Table of Contents
Troubleshooting
