Table of Contents
NL
Place and connect
Connection on the right
(~ 60 cm
0 ~ 195 cm
8 ~ 140 cm
@ 60cm ~ 100cm
Note:
If the supply hose is too short for
your connection, you can order an
extension from the
service.
Water inlet
:
Warning
Risk of fatal injury!
There is a risk of electric shock if you
touch live components.
Do not immerse the Aqua-Stop safety
valve in water (contains an electric valve).
* Depending on the model
Observe the following when
connecting the device:
Clues
Only use the appliance with a cold
■
water supply.
Do not connect the appliance to the
■
water heater or a non-pressurized
hot water boiler.
18
Do not use used
■
supply hose. Use only the supplied
hose, or a hose purchased from a
authorized specialist dealer.
Do not bend, pinch, modify or cut
■
the water supply hose (otherwise the
strength is no longer guaranteed).
Tighten the screw connections only
■
hand-tight. If the screw connections
are tightened too tightly with a tool
(pliers), the screw thread can be
damaged.
Optimal water pressure in the
supply network
at least 100 kPa (1 bar)
Maximum 1000 kPa (10 bar)
When the tap is open, the water flow is
at least 8 l/min.
A pressure reducing valve must be
installed at a higher water pressure.
Connection
1.
Connect the water supply hose to the
water tap (¾" = 26.4 mm) and to the
appliance:
- Fashion model: standard
Table of Contents
