Table of Contents
Quick Links
Table of Contents
Related Manuals for Bosch WNA13400NL
Summary of Contents for Bosch WNA13400NL
- Page 1 Clothes dryer WNA13400NL Operating manual and installation instructions...
- Page 2 Washer/ Dryer. Attention! In order to meet the high quality standards of the Bosch brand, the function This signal word indicates a potentially and impeccable condition of every washer- dangerous situation. Failure to do so may...
-
Page 3: Table Of Contents
Index enOperation manual and installation instructions Preparing laundry for drying Intended use....4 ......28 starch . -
Page 4: Intended Use
Intended use Intended use Device Settings..43 sensors ....43 This appliance is intended for ■ Intended use household use only. -
Page 5: Safety Instructions
Safety instructions Children/people/pets Before turning on the device: Check that there is no visible damage Warning is on the device. Do not use the Risk of fatal injury! device if it is damaged. If you have any problems Children and other people encounter, please contact your dealer or who are unable to assess the our customer service. -
Page 6: Installation
Safety instructions Warning Warning Risk of fatal injury! Risk of poisoning! Detergents and Children can be themselves embed in devices and thus care products can result in end up in a life-threatening poisoning when used situation. taken. Do not place the appliance Consult a doctor in case of ■... - Page 7 Safety instructions That the mains voltage at When using an earth leakage ■ ■ your outlet corresponds to circuit breaker, only use one the rated voltage stated on with the following symbol: device (type plate). The z. The presence of this connected loads and the symbol is the only way to required fuse value are...
-
Page 8: Operation
Safety instructions If the hoses and Warning Injury! ans on ■ connection cable are not Risk of injury / material correctly routed, they can damage / damage to the pose a tripping hazard, device! which could lead to injury. The device may vibrate or ■... - Page 9 Safety instructions Using hoses supplied by Service ■ other Warning marks for connecting the Risk of explosion/fire! water supply may result in Laundry that has come into property damage or contact with solvents, oil, wax, damage to the appliance. wax remover, paint, grease or stain remover may ignite when Use only the dried in the machine, or may...
- Page 10 Safety instructions Certain objects may ignite Do not switch off the appliance ■ ■ during drying, or even cause until the drying cycle is complete, the unit to catch fire or unless you remove all items from explode. the drum immediately and spread them out (to allow the Remove any heat to escape).
- Page 11 Safety instructions Warning Attention! Risk of burns! Material damage / damage to the device When washing at high temperatures, there is a risk of When the amount ■ burns if you come into contact laundry in the appliance the with washing water (e.g. when maximum discharging hot loading capacity...
-
Page 12: Cleaning/Maintenance
Safety instructions Warning Cleaning/Maintenance Risk of poisoning! Warning Toxic fumes may be Risk of fatal injury! released by The device is powered cleaning agents that by electricity. There is a contain solvents, eg cleaning chance of a solvent. electric shock if you come into Do not use contact with live components. -
Page 13: Environmental Protection
Environmental protection Save energy and resources Attention! Material damage / damage to the device If you follow these instructions, the Cleaning agents and appliance will use less electricity and resources for the water. Pre-treating laundry (e.g. stain Choose programs with low temperatures removers, pre-wash sprays, and longer washing times, and use the etc.) can cause damage if they... -
Page 14: Energy Saving Mode
Place and connect Wash the laundry without prewash. Washing with prewash extends the ■ program duration and increases energy and water consumption. The device has a continuous automatic load adjustment. Depending on the type of fabric and ■ the load capacity, the continuous automatic load adjustment optimally reduces water consumption and program duration. -
Page 15: Instructions
Place and connect in addition a hose clamp (24 - 40 mm Attention! diameter, available in specialist shops) Water damage is required to The connection points for the water drain hose to connect to a siphon. water supply hose and water drain hose are under high pressure. -
Page 16: Kitchenette
Place and connect Installing the appliance in a kitchenette Warning Risk of fatal injury! There is a risk of electric shock if you touch live components. Do not remove the cover from the device. Remove the hoses from the holders. Clues A recess width of 60 cm is required. -
Page 17: Remove The Struts
Place and connect Remove the struts b) Remove the cuffs. Loosen and remove all screws in the vertical shipping struts. Install the covers. Remove the transport struts. Push the covers firmly into place by applying pressure to the snap-in hooks. Length of hoses and connection cable Connection on the left... -
Page 18: Water Inlet
Place and connect Connection on the right Do not use used ■ supply hose. Use only the supplied hose, or a hose purchased from a authorized specialist dealer. Do not bend, pinch, modify or cut ■ the water supply hose (otherwise the strength is no longer guaranteed). -
Page 19: Drain
Place and connect Water drain - Fashion model: AquaSecure Warning Risk of burns! When washing at high temperatures, there is a risk of burns when you come into contact with hot water (e.g. when draining hot water into a sink). Do not reach into the hot water. -
Page 20: Couples
Place and connect Connection couples Drain in a siphon Level the appliance using a spirit level. ■ The connection must be with a hose clamp, ∅ 24-40 mm (specialist dealer) Not leveling correctly can lead to must be secured. more noise, vibration and "walking". Loosen the lock nuts with a wrench by turning them clockwise. -
Page 21: Electrical Connection
Place and connect Tighten the locknut against the The power cord should only be ■ housing. replaced by a qualified electrician (if Hold the foot firmly and do not change necessary). Replacement connection its height. The locknuts on all four cables can be obtained from the after- device feet must be screwed firmly sales service. -
Page 22: Transportation
Place and connect Put a standard detergent in Installing the Compartment II according to the transport locks: manufacturer's instructions for Remove the covers and keep them in a lightly soiled laundry. safe place. Note: Use to Note: Use a screwdriver if necessary. To prevent foaming, use only half the recommended amount of detergent. - Page 23 Place and connect b) Install and tighten the screws. c) Clamp the hoses securely in the holders. Before turning the device back on: Clues the struts should be ■ removed. ~" Removing the Struts" on page 17 The transport brackets should be ■...
-
Page 24: Getting To Know The Device
Getting to know the device Getting to know the device Device Familiarize yourself with the device Detergent drawer Control panel loading door Service valve... -
Page 25: Panel
Getting to know the device Control panel Program- standard settings can are being changed. Overview of all program default settings ~ page 36 Additional program settings can be selected. Overview of all extras program settings ~ page 37 aStart/Refill -button for starting, interrupting (eg to add items of laundry) and canceling a program. -
Page 26: Panel
Getting to know the device Display panel Additional program settings Program Default Settings Display Institution /»/O ‰Drying target Description Display Institution Tprewash — 6 temp.°C - 90° Temperature that pAnti wrinkle can be entered set in °C (SpeedPerfect — = cold Program progress status Spin speed 2 - 1400*... -
Page 27: Laundry
laundry Sorting laundry laundry Sort your laundry according to the Preparing laundry for washing manufacturer's washing instructions and laundry information on the care labels, depending on: Type of fabric/fabric Protect your laundry and appliance apparaat ■ Color ■ Attention! Note: laundry can Damage to the device/textile discolor. -
Page 28: Prepare Laundry For Washing
laundry Symbols on the care labels Textiles that still contain ■ ■ hairspray or similar substances. Suitable for a normal Clues washing process; Hand-washed textiles should be e.g. Cotton i program A ■ washed with the correct spin speed gentle washing process is before drying required;... -
Page 29: Detergents And Care Products
Detergents and care products Detergents and care products You can use your appliance and laundry Detergent and care products protect them by selecting and using the right detergents and care products. You can use all detergents and care products that are suitable for the device. Note: Read the safety information ~ page 5... -
Page 30: Detergent Recommendation
Detergents and care products Detergent Recommendation This information will help you choose the right detergent for your laundry. Program Temperature fabric Laundry detergent Heat-resistant white Standard detergent with cottons From cold to max. cotton or linen fabrics optical brighteners 90 °C Detergent for coloreds, Variegated linen or cotton cottons... -
Page 31: Overview Of Programs
Overview of programs Overview of programs Selectable programs Overview of programs Programme/type of laundry Options/Information Name of the program Max. load for washing/ Max. load for drying Brief explanation of the program and for which types of textile Max. load in kg it is suitable. - Page 32 Overview of programs Programme/type of laundry Options/Information 8.0kg/5.0kg Eco 40-60 Suitable for washing normally soiled textiles from cotton, linen or blended fabrics and before drying so that it 400 - 1400 rpm can go straight into the closet. Tprewash,pAnti wrinkle Clues Types of textiles that according to the washing symbol at 40°C was 9 ‰Drying targete (¾è, »...
- Page 33 Overview of programs Programme/type of laundry Options/Information 2.0kg/1.0kg ]SuperShort 15 min./ Wash & Dry 60 min. \ — For small amounts of lightly soiled clothing made of cotton, - 40 °C linen, synthetic or blended fabrics. Approx. 15 minutes before 400 - 1000 rpm Wash.
- Page 34 Overview of programs Programme/type of laundry Options/Information î Iron Assist - /1.0 kg Deodorising and anti-creasing programme, suitable for wool, linen, suits, etc., which do not require frequent washing. Clues It is recommended to hang clothes for 3-5 ■ ‰Drying target - minutes in a not possible ventilated environment.
-
Page 35: Table
Overview of programs Programme/type of laundry Options/Information ‰ Intensive drying - /5.0 kg Only normal drying program to dry clothes at a higher temperature - through¾to get a cupboard dry+ result automatically ‰Drying target e (¾è, »è,Oe) - through » to automatically get a cabinet dry result not possible - throughOto automatically obtain an iron dry result. -
Page 36: Program Standard
Program default settings ñ Ready in/Drying time Program standard settings Before the program starts, You can the end of the program ("Finish in" time in steps of 0.5 h (h = hour) between You can change the default settings “minimum selectable end time” and 9.5 h) Program Default Settings of selected programs. -
Page 37: Additional Program Settings
Program additional settings ö (Iron Dry): for delicate laundry. Fabrics Additional program that can be ironed (iron fabrics to avoid settings creasing). Clothes can then be hung up to dry further. Note: find additional program settings in You can check the possible Program Extras Settings the overview, these differ depending on The drying process will follow the... -
Page 38: Operating The Device
Operation of the device (SpeedPerfect – Always insert or remove the plug from the socket only with dry Wash in a shorter time frame, while hands. achieving a washing result similar to Turn on the tap. normal performance. Choose (SpeedPerfect for the activate or deactivate this additional program setting. -
Page 39: Place Laundry In The Drum
Operation of the device Put laundry in the drumrommel Fill with detergent and laundry care product Open the door, place laundry in the drum, make sure no laundry is caught Attention! between the door and rubber seal and Damage to the device close the door. - Page 40 Operation of the device Put the detergent and/or Position the dosing aid A to dose the cleaning agent in the drawer. correct amount of liquid detergent: Pull out the detergent drawer. Press the insert down and remove the drawer completely. Detergent for compartment I pre-treating and...
-
Page 41: Start Program
Operation of the device Start program Add/Remove from laundry touch the aStart/Refill button on and hold it for approx. 1- After starting the program (which only 2 seconds, then release the button. The performs washing), you can add or program starts and the appliance door is remove laundry if necessary. -
Page 42: Program
Operation of the device Cancel the program If you do not take out the laundry within ■ 15 minutes after the drying process is completed, the anti-crease process will For programs washing at high start to prevent the laundry from temperatures: creasing. -
Page 43: Device Settings
Device Settings Always wait for the program to Volume and ■ finish. The device may still be change drum care information locked. Then turn on the device and wait for it to unlock. Use the ñ Ready in/Dry time button to make the following settings at the corresponding to change program selector positions:... -
Page 44: Cleaning And Maintenance
Cleaning and maintenance Drum Cleaning and Warning maintenance Risk of injury/material damage and damage to the device! Warning Cleaning and maintenance: Permanent washing at low temperatures Danger of fatal injuries! and lack of ventilation of the appliance can There is a risk of electric shock when damage the drum and cause injuries. -
Page 45: Appliance
Cleaning and maintenance Empty the detergent drawer, Install and secure the insert (push the cylinder onto the guide pin). clean the detergent drawer and its housing If the appliance contains detergent or fabric softener residues: Pull out the detergent drawer. Press the insert down and remove the drawer completely. - Page 46 Cleaning and maintenance Open the service door. Reinstall the pump cover and screw it on. The handle must be in a vertical position. Remove the drain hose from the holder. Remove the sealing cap and allow the water to flow into a suitable Close the service door.
-
Page 47: The Drain Hose At The Siphon Is Clogged
Cleaning and maintenance The drain hose at the siphon is Clean the filters: clogged Disconnect the hose from the back of the device. Turn the program selector to From. Remove the plug from the socket. Loosen the hose clamp. Carefully remove the drain hose;... -
Page 48: Malfunctions And How To Fix Them Remedy
Malfunctions and how to fix them Attention! Malfunctions and how these Water damage! to remedy Any escaping water can cause water damage. Emergency unlock Do not open the door when water can be Stori ngenhoedezeteverhel pen seen through the glass. E.g. -
Page 49: Information On The Display
Malfunctions and how to fix them Information on the display Cause/Solution Display Flashes quickly + signal: the door was opened and the water level is too high. ■ Close the door, resume the program with the buttonaStart/Refill or choose [pump down. Flashes slowly: the door lock temperature is too high to open the ■... -
Page 50: Malfunctions And How To Fix Them
Malfunctions and how to fix them Cause/Solution Display H:95 No water detected in the drying phase can lead to poor drying results. alternates with “Ÿš (End) ~" The filter in the water supply is clogged" on page 47 when the pro gram is completed H:32 The load imbalance detection system interrupted the spin cycle because... - Page 51 Malfunctions and how to fix them Cause/Solution Malfunctions The water is not drained The drain pipe or water drain hose is clogged. Clean the drain pipe and the water ■ pumps. drain hose. The drain pipe or water drain hose is jammed or closed. Make sure that ■...
- Page 52 Malfunctions and how to fix them Cause/Solution Malfunctions The spin result is Not a malfunction: the imbalance detection system has interrupted the ■ not satisfactorily. spin cycle because the laundry was unevenly distributed. Distribute small and large items of laundry evenly in the drum. Is additional Laundry wet/too damp.
- Page 53 Malfunctions and how to fix them Cause/Solution Malfunctions Water inlet noise during The washer dryer uses water condensing technology, water is constantly needed to dry the laundry. Therefore, the water tap the drying phase. must be open all the time until the end of the drying phase. Run the (cold) program Cottoni —...
-
Page 54: Service
customer service Note: Based on the terms of the customer service manufacturer's warranty, the use of the after-sales service is free. If you have any questions about use, Service cedi enst More information about the warranty period cannot rectify certain faults on the device and conditions in your country is or want to have the device repaired, available from our after-sales service,... - Page 55 customer service More information about your model can be found online at https://energylabel.bsh- group.com * This web address is linked to the official EPREL product database of the EU. At the time of going to press, the web address was not yet published. Then follow the search instructions on models.
-
Page 56: Consumption Values
Consumption values Consumption values The following information is provided in accordance with the EU Ecodesign Regulation. Consumption values The values indicated for programs other than Eco 40-60 are indicative only and have been determined according to the applicable standards EN60456 and EN62512. The automatic dosing function is deactivated for this purpose. -
Page 57: J Technical Data
Technical data Technical data Aqua-Stop warranty Only for devices with Aqua-Stop Dimensions: Aqua-Stop guarantee e Technical data 84.8cm x 59.8cm x 59.0cm In addition to warranty claims against (height x width x depth) the seller based on the sales agreement and your Weight: device warranty, we will provide 71 kg... - Page 60 Free and easy registration – also via smartphones: www.bosch-home.com/welcome Need help? Here you will find help. Expert advice for your Bosch household appliances, need help with problems or repairs by Bosch experts. Discover the many ways Bosch can support you: www.bosch-home.com/service Contact details for all countries can be found in the attached service supplement.