Table of Contents
Quick Links
Table of Contents
Related Manuals for Bosch WNA13400EU
Summary of Contents for Bosch WNA13400EU
- Page 1 Washer dryer WNA13400EU deInstructions for use and installation...
- Page 2 In order to meet the high quality standards Caution! of the Bosch brand, every washer-dryer that leaves our factory has been carefully checked This signal word indicates a possibly to ensure that it functions correctly and is in dangerous situation.
-
Page 3: Table Of Contents
contents enUsing and installation instructions Intended Use Detergents and care products..27 Recommended detergent..28 Safety instructions ..5 Program overview. -
Page 4: 4Th
Intended Use Intended Cleaning and maintenance..43 Machine housing / control panel..43 ßer use washing drum....43 Descaling. -
Page 5: Safety Instructions
safety instructions Do not allow children to safety instructions ■ carry out cleaning or maintenance work on this The following safety instructions and device without supervision. Safeguards notices Keep children under the warnings are intended to protect you and those ■... -
Page 6: Installation
safety instructions warning The device must not be ■ supplied via an external Risk of poisoning! switching device, such as a Detergents and care timer, or connected to a products can cause circuit. poisoning when consumed. which is regularly switched If accidentally swallowed, seek on and off by the energy medical advice. - Page 7 safety instructions warning warning Risk of electric shock / risk of fire / Risk of injury / damage to damage to property and property and equipment! The device can vibrate or equipment! ■ Modifying or damaging the move during operation and power cord of the device can cause injury or property lead to electric shock, short...
-
Page 8: Operation
safety instructions Incorrect routing of the hose The device is secured with ■ ■ and power lines poses a risk transport locks for of tripping and injury. Lay transport. Not hoses and lines so that there Removed transport locks is no risk of tripping. can damage the device during operation. - Page 9 safety instructions warning The last part of the drying ■ cycle is done without heat Risk of explosion and fire! (cool down cycle) to ensure Laundry pretreated with ■ that the laundry remains at cleaning agents containing a temperature that does not solvents, eg stain remover / damage the laundry.
-
Page 10: Cleaning / Maintenance
safety instructions Reaching into the rotating Caution! ■ drum can injure your hands Property and equipment damage Exceeding the maximum ■ come. load Wait until the drum stops impairs the function of the rotating. device or leads to property and device damage. warning Do not exceed the Risk of scalding! - Page 11 safety instructions Turn off the device. warning ■ Disconnect the device from Risk of injury / damage to the power supply (pull out property and equipment! the plug). The use of non-original spare Never touch the power plug parts and accessories is ■...
-
Page 12: Environmental Protection
environmental Protection Reduce the washing temperature for environmental Protection lightly and normally soiled laundry. Packaging / old device The device uses less energy at low Environmental Protection ■ temperatures. For light to normal Dispose of packaging in an environmentally soiling, temperatures lower than those friendly manner. -
Page 13: Positioning And Connecting
Positioning and connecting Bag: Positioning and Instructions for use and ■ Connect installation Customer service center ■ scope of delivery directory * Positioning and connections Guarantee* ■ A notice: Check the device for transport Supplement to the instructions for ■ damage. -
Page 14: Installation Area
Positioning and connecting Installation on a base or Incorrect laying of the hose and power ■ lines creates the risk of tripping and wooden floor injury. Lay hoses and lines so that there is no risk of tripping. Caution! Equipment damage The device can wander during the spin cycle and tip / fall from the base. -
Page 15: Remove The Transport Locks
Positioning and connecting Remove transport locks Loosen and remove all 4 transport locking screws. Caution! Equipment damage The device is secured with transport ■ locks for transport. If the transport locks are not removed, the device can be damaged during operation. Before using the device for the first time, it is imperative that you completely remove all 4 transport... -
Page 16: Removing The Support Struts
Positioning and connecting Hose and cable lengths Lock the covers firmly by pressing the locking hook. Left-hand connection Remove the support struts Unscrew and remove all screws on the vertical transport struts. (~ 140 cm 0 ~ 145 cm 8 ~ 95 cm @ 60cm ~ 100cm Right-hand connection Remove the transport struts. -
Page 17: Inlet
Positioning and connecting Water inlet connection Connect the water inlet hose to the warning tap (¾ "= Risk of death! 26.4 mm) and on the device: Contact with live parts creates the risk of - Model: default electric shock. Do not immerse the Aquastop safety valve in water (contains an electrical valve). -
Page 18: Drainage
Positioning and connecting Carefully open the tap and check the connection connection points for leaks. The screw Drain in a siphon connection is under water line ■ The connection point must be secured pressure. with a hose clip, ∅ 24 - 40 mm (specialist retailer). - Page 19 Positioning and connecting Align Tighten the lock nut against the housing. Align the device using a spirit level. Hold the foot firmly and do not adjust the height. The lock nuts of all four device feet Incorrect alignment can lead to loud must be screwed tightly against the noise, vibrations and “wandering”...
-
Page 20: Transport
Positioning and connecting A notice: To avoid foaming, only use Power cable change (if necessary) can only be ■ half the recommended amount of carried out by a qualified electrician. detergent. Do not use wool or mild Replacement power cable available from detergents. - Page 21 Positioning and connecting Install transport locks: b) Insert and tighten screws. Remove and keep covers. A notice: Use a screwdriver if necessary. c) Clamp the hoses to the brackets. Before starting up the device again: Insert all 4 sleeves. Hints The support struts have to ■...
-
Page 22: Get To Know The Device
Get to know your device Get to know the device equipment Get to know your device Detergent drawer Control panel Loading door Service flap 22nd... -
Page 23: Control Panel
Get to know your device Control panel Program preferences can be changed. Overview of all program presets ~ Page 35 Additional program settings lungs can be chosen. Overview of all additional program settings ~ Page 36 button A.Start / Reload (Start / Reload) for starting, interrupting (e.g. -
Page 24: Display Panel
Get to know your device Additional program settings Display panel Program preferences attitude advertisement ¾ /»/ö ‰Drying Aim attitude description advertisement TPrewash Adjustable tem- - 90 ° C 6th Temp. (Tem- pLess ironing (easy to temperature in ° C temperature) iron) = cold (SpeedPerfect... -
Page 25: Laundry
Laundry Brush sand from bags and envelopes. ■ Laundry Remove the curtain rolls or put them ■ e ready for washing Laundry in a net / bag. Laundry elite Sort laundry Protection of the laundry and the device Wash in accordance with the care instructions and the manufacturer's Caution! instructions on the care labels as follows... -
Page 26: Preparing Laundry For Drying. 26 Strengths
Laundry Symbols on the care labels Textiles that have been treated with ■ ■ flammable liquids, e. B. with stain Suitable for normal washing remover, benzine, thinner. Risk of process, explosion! z. B. Cottons programi Textiles that still contain hairspray or ■... -
Page 27: Detergents And Care Products
Detergents and care products Washing and care products With the correct selection and use Detergents and care products of detergents and care products, you will protect your appliance and your laundry. You can use all detergents and care products that are suitable for your device. A notice: Please note the information on security... -
Page 28: Recommended Detergent
Detergents and care products Recommended detergent This information is intended to help you choose the right detergent for your textiles. program textiles temperature laundry detergent Heat-resistant white Cottons From cold to 90 ° C Heavy duty detergent with optical textiles made of cotton or brighteners linen Colorful linen or... -
Page 29: Program Overview
Program overview Program overview Selectable program Program overview Options / notes Program / type of laundry Max. Load for washing / Program name Max. Load for drying Brief explanation of the program and for which textiles it is Max. Load in kg suitable is depending on the model and program Selectable temperature * in °... - Page 30 Program overview Options / notes Program / type of laundry Eco 40-60 8.0 kg / 5.0 kg Suitable for washing normally soiled cotton, linen and mixed textiles and for drying for immediate storage in the 400-1400 rpm cupboard TPrewash,pLess ironing (easy Hints ironing) Textiles with the laundry symbol 40 °...
- Page 31 Program overview Options / notes Program / type of laundry Sportswear] 2.0 kg / 2.0 kg For the gentle cleaning of sports and leisure clothing - 40 ° C made of microfiber, fleece or synthetic. Dry at lower 400-800 rpm Temperature for textile care.
- Page 32 Program overview Options / notes Program / type of laundry p Wool W. 2.0 kg / - Hand- or machine-washable textiles made of wool or containing - 40 ° C wool. 2 - 800 rpm Particularly gentle wash program to prevent the laundry from shrinking, longer program breaks (items of laundry rest in detergent solution) ‰Drying Aim Possible...
- Page 33 Program overview Options / notes Program / type of laundry ‰ My Time Dry (drying time program) - / 5.0 kg Mixed fabrics, for lightly soiled cotton and synthetic laundry The program duration can be set individually (at least 20 minutes). The maximum program duration is 120 minutes.
-
Page 34: Table
Program overview Drying table Estimated drying time (min) ö loading »(Wardrobe- ¾ Recommended drying program dry) (cupboard for drying (Ironing tray nen (kg) cken) cken +) 40-90 60-100 0.5-2.0 40-70 ‰ Intensive Dry 90-120 100-130 2.0-3.0 70-90 120-210 130-240 90-130 3.0-5.0 30-60 70-120 0.5-1.5... -
Page 35: Program Preferences
Program preferences ñ Finished in / Time Dry Program preset lungs Before the program starts can the pro End of gram ("Finish in" time) in steps of 0.5 h (h = hour) (between "at least You can change the default settings of selectable end time"... -
Page 36: Gen
Additional program settings ö (Iron dry): For delicate laundry. Textiles Additional programs suitable for ironing (iron textiles to avoid opinions creasing). Garments can can also be hung up to dry. A notice: In the overview you will find Additional program settings possible additional program settings;... -
Page 37: Operate The Device
Operate the device A notice: if pLess ironing - Do not pull out the mains plug by (Easy iron) is activated, the residual pulling on the connection cable. moisture in the laundry is increased after spinning. - Only insert / pull out the mains plug with dry hands. -
Page 38: Put Laundry Into The Drum
Operate the device Put laundry in the drum Measure and add detergent and care products Open the door and place laundry in the Caution! drum. Make sure that no items of laundry Equipment damage are trapped between the washing machine Detergents and products for pretreating door and the rubber sleeve. - Page 39 Operate the device Fill in the detergent and / or care Pull out the detergent drawer. Press product. down the insert and remove the drawer completely. Dosing tank I. Detergent pretreatment and clothing disinfection. Push the dispensing aid forwards, fold it (only for device with pre- down and click into place.
-
Page 40: Start The Program
Operate the device Add / remove laundry Start the program The key A.Start / Reload (start / post lay) Press and hold for 1 to 2 seconds and After the program has started, laundry then release. The program starts and the can be added or removed if necessary washing machine door is locked. -
Page 41: Program Termination
Operate the device If the laundry is not done within 15 Program termination ■ minutes of the When the drying process is completed, For washing programs with a high the anti-crease process starts to temperature: prevent the laundry from creasing. The The key A.Start / Reload (start / process takes about 30 minutes.0:00, reload) touch. -
Page 42: Device Settings
Device settings Leave the washing machine door and Change the volume and the drum care ■ detergent drawer open so that any warning signal residual water can evaporate. Always With the key ñ Finished in / Time Dry wait for the program to end as the ■... -
Page 43: Cleaning And Maintenance
Cleaning and maintenance Washing drum Cleaning and maintenance warning warning Risk of injury / damage to property and Clean and wait: Risk of death! equipment! Contact with live parts creates the risk Continuous washing at low temperatures of electric shock. Open the program and insufficient ventilation of the machine selectorOff can damage the drum and lead to injuries. -
Page 44: Empty The Detergent Drawer, Clean The
Cleaning and maintenance Empty the detergent drawer, Put the insert on and click into place (place the cylinder on the guide pin). clean the detergent drawer and its housing If there is detergent or fabric softener residue in the appliance: Pull out the detergent drawer. - Page 45 Cleaning and maintenance Open the service flap. Put the pump cover back in place and screw it on. The handle must be vertical. Take the drain hose out of the holder. Remove the cap and allow the lye to Close the service door. drain into a suitable container.
-
Page 46: Drain Hose On The Siphon Is Blocked. 45 The Filter On The Water Inlet Is Blocked
Cleaning and maintenance Clean the drain hose and the Remove the sieve with a pair of tongs. siphon socket. Clean the sieve with a small brush. Reattach the drain hose and secure the connection point with the hose clamp. The filter at the water inlet is clogged Reduce the water pressure in the inlet hose:... -
Page 47: Faults And Remedial Measures
Malfunctions and remedial measures Caution! Faults and remedial Water damage! measures Leaking water can cause water damage. Do not open the washing machine door if Emergency release Disruptions and corrective measures you can see water on the glass. Example: power failure Open the program selector Off The program will continue when the to adjust. -
Page 48: Information On The Display Panel
Malfunctions and remedial measures Notes on the display panel Cause / remedy advertisement Flashes quickly + beep: The washing machine door was opened when the water level ■ was too high. Close the washing machine door and the program with the buttonA. Start / Reload (start / reload) continue or [Drain to choose. -
Page 49: Them
Malfunctions and remedial measures Cause / remedy advertisement No water was detected during the drying phase. Poor drying result H: 95 possible. alternating with “Ÿš ~ " Clogged water inlet filter "on page 46 according to program pass The imbalance control system stopped spinning due to uneven H: 32 distribution of the laundry. - Page 50 Malfunctions and remedial measures Cause / remedy Disruptions The program starts Is the keyA.Start / Reload (start / reload) touched or ñ Finished in / ■ Not. Time Dry been selected? Is the washing machine door closed? ■ Is the child lock activated? Deactivate the child lock. ■...
- Page 51 Malfunctions and remedial measures Cause / remedy Disruptions Used too much detergent? From the detergent drawer enters foam Mix a tablespoon of fabric softener with ½ l of water and put in the measuring container II fill in. (Not for outdoor, sportswear and textiles filled with down!) the end.
- Page 52 Malfunctions and remedial measures Cause / remedy Disruptions The display panel Has there been a power failure? ■ Have the fuses blown? Reset / replace the fuses. indicator lamps do not ■ work during operation. If the fault occurs repeatedly, call customer service. ■...
- Page 53 Malfunctions and remedial measures Cause / remedy Disruptions The drying result At the end of the program, the warm laundry feels more humid than it ■ is not satisfactory actually is. Spread out the laundry and let it cool down. (laundry is not dry The ambient temperature is too high (over 30 °...
-
Page 54: Customer Service
Customer service Customer service, at your dealer and on Customer service our website. If you contact customer service, you will If you have any questions about the need the product number (E no.) And the Customer service application, if you cannot rectify faults in the production number (FD) of your device. -
Page 55: Consumption Values
Consumption values Consumption values The following information is provided in accordance with the EU Ecodesign Directive. The values given for programs other than Eco 40-60 are only Consumption values Guide values and were determined in accordance with the applicable standards EN 60456 and EN 62512. -
Page 56: Technical Specifications
Technical specifications Aqua-Stop guarantee Technical specifications Dimensions: Only for devices with Aqua-Stop Technical data Aqua-Stop guarantee ie 84.8 cm x 59.8 cm x 59.0 cm In addition to the warranty claims against (height x width x depth) the seller from the sales contract and in addition to our device warranty, we provide Weight: compensation under the following... - Page 60 Do you need assistance? You can find helpful information here. Advice from experts for your Bosch home appliances if you need help with problems or repairs from Bosch experts. Here you can find out everything about the many possibilities for support from Bosch: www.bosch-home.com/service...