Page 1
CORDLESS IMPACT DRIVER PDSSA 20-Li A1 CORDLESS IMPACT DRIVER AKKU-DREHSCHLAGSCHRAUBER Translation of the original instructions Originalbetriebsanleitung IAN 284660...
Page 2
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen Funktionen des Gerätes vertraut. GB / IE / NI/CY Translation of the original instructions Page DE / AT / CH...
Page 4
BATTERY COMPATIBLE WITH ALL DEVICES OF THE SERIES „PARKSIDE X 20V TEAM“ 20V max.
CORDLESS IMPACT DRIVER Features Tool holder PDSSA 20-Li A1 Locking sleeve Introduction Bit holder (magnetic) Rotation direction switch/lock Congratulations on the purchase of your new appli- Belt clip ance. You have chosen a high-quality product. The Battery charge level button operating instructions are part of this product.
Use only the following high-speed battery WARNING! charger to charge the cordless tool: ► The vibration level varies in accordance with PLG 20 A1* the use of the power tool and may be higher INPUT: than the value specified in these instructions Rated voltage: 230–240 V ~ , 50 Hz in some cases.
d) Remove any adjusting key or wrench before 2. Electrical safety turning the power tool on. A wrench or a key a) Power tool plugs must match the outlet. left attached to a rotating part of the power tool Never modify the plug in any way. may result in personal injury.
f) Keep cutting tools sharp and clean. Properly CAUTION! RISK OF EXPLOSION! maintained cutting tools with sharp cutting edges Never charge non-rechargeable are less likely to bind and are easier to control. batteries! g) Use the power tool, accessories and tool bits, Protect the rechargeable battery etc.
Safety guidelines for battery chargers Before use This appliance may be used by chil- ■ Charging the battery pack (see fig. A) dren aged 8 years and above and CAUTION! by persons with limited physical, ► Always unplug the appliance before you sensory or mental capabilities or remove the battery pack from or connect the battery pack to the charger.
Checking the battery charge level Inserting the bits ♦ Press the battery charge level button to check ♦ Insert the adapter or bit holder into the the status of the battery (see also main diagram). tool holder The status/remaining charge will be shown on ♦...
Kompernass Handels GmbH Scope of the warranty This appliance has been manufactured in accordance warranty with strict quality guidelines and inspected meticu- Dear Customer, lously prior to delivery. This appliance has a 3-year warranty valid from The warranty covers material faults or production the date of purchase.
Please consult your local authorities regarding Service Cyprus suitable disposal of worn out power tools/battery Tel.: 8009 4409 packs. E-Mail: [email protected] IAN 284660 Importer Please note that the following address is not the service address. Please use the service address provided. KOMPERNASS HANDELS GMBH...
EN 61000-3-3:2013 Type/appliance designation: Cordless impact driver PDSSA 20-Li A1 Year of manufacture: 12 - 2016 Serial number: IAN 284660 Bochum, 22/12/2016 Semi Uguzlu - Quality Manager - We reserve the right to make technical changes in the context of further product development.
To ensure a fast processing of your order, have the article number of your appliance to hand (e.g. IAN 284660) in case of questions. The article number can be found on the type plate or the title page of these instructions.
AKKU-DREHSCHLAGSCHRAUBER Ausstattung Werkzeugaufnahme PDSSA 20-Li A1 Verriegelungshülse Einleitung Bit-Halterung (Magnetisch) Drehrichtungsumschalter / Sperre Wir beglückwünschen Sie zum Kauf Ihres neuen Gürtelclip Gerätes. Sie haben sich damit für ein hochwertiges Taste Akkuzustand Produkt entschieden. Die Bedienungsanleitung ist Akku-Display-LED Teil dieses Produkts. Sie enthält wichtige Hinweise Akku-Pack* für Sicherheit, Gebrauch und Entsorgung.
Verwenden Sie zum Laden des Akku-Werk- WARNUNG! zeugs nur folgendes Akku-Schnellladegerät: ► Der Schwingungspegel wird sich entsprechend PLG 20 A1* dem Einsatz des Elektrowerkzeugs verändern EINGANG / Input: und kann in manchen Fällen über dem in Bemessungsspannung: 230 - 240 V ~ , 50 Hz diesen Anweisungen angegebenen Wert (Wechselstrom) liegen.
c) Halten Sie Kinder und andere Personen wäh- 3. Sicherheit von Personen rend der Benutzung des Elektrowerkzeugs a) Seien Sie stets aufmerksam, achten Sie darauf, fern. Bei Ablenkung können Sie die Kontrolle was Sie tun und gehen Sie mit Vernunft an die über das Gerät verlieren.
4. Verwendung und Behandlung des 5. Verwendung und Behandlung des Akkuwerkzeugs Elektrowerkzeugs a) Laden Sie die Akkus nur in Ladegeräten auf, a) Überlasten Sie das Gerät nicht. Verwenden die vom Hersteller empfohlen werden. Für Sie für Ihre Arbeit das dafür bestimmte ein Ladegerät, das für eine bestimmte Art von Elektrowerkzeug.
Wenn die Netzanschlussleitung die- Gerätespezifische Sicherheitshinweise ■ für Schlagschrauber ses Gerätes beschädigt wird, muss ■ Tragen Sie Gehörschutz beim Schlagschrau- sie durch den Hersteller oder seinen ben. Die Einwirkung von Lärm kann Gehörver- Kundendienst oder eine ähnlich lust bewirken. qualifizierte Person ersetzt werden, ■...
Ausschalten: ACHTUNG! ♦ Lassen Sie zum Ausschalten des Gerätes den ♦ Sollte die rote Kontroll-LED blinken, dann EIN- / AUS-Schalter los. ist der Akku-Pack überhitzt und kann nicht Drehzahl/Anziehdrehmoment aufgeladen werden. einstellen ♦ Sollte die rote und grüne Kontroll-LED ♦ Leichter Druck auf den EIN- / AUS-Schalter gemeinsam blinken, dann ist der Akku-Pack bewirkt eine niedrige Drehzahl/Anziehdrehmo-...
■ Soll ein Lithium-Ionen-Akku längere Zeit gela- Garantiezeit und gesetzliche gert werden, muss regelmäßig der Ladezustand Mängelansprüche kontrolliert werden. Der optimale Ladezustand Die Garantiezeit wird durch die Gewährleistung liegt zwischen 50 % und 80 %. Das optimale nicht verlängert. Dies gilt auch für ersetzte und Lagerungsklima ist kühl und trocken.
Tel.: 0842 665566 (0,08 CHF/Min., diese und viele weitere Handbücher, Mobilfunk max. 0,40 CHF/Min.) Produktvideos und Software herunterladen. E-Mail: [email protected] IAN 284660 Importeur Bitte beachten Sie, dass die folgende Anschrift keine Serviceanschrift ist. Kontaktieren Sie zunächst die benannte Servicestelle. KOMPERNASS HANDELS GMBH...
EN 55014-1:2006/A2:2011 EN 55014-2:2015 EN 61000-3-2:2014 EN 61000-3-3:2013 Typ / Gerätebezeichnung: Akku-Drehschlagschrauber PDSSA 20-Li A1 Herstellungsjahr: 12 - 2016 Seriennummer: IAN 284660 Bochum, 22.12.2016 Semi Uguzlu - Qualitätsmanager - Technische Änderungen im Sinne der Weiterent- wicklung sind vorbehalten. │ DE │ AT │ CH ■...
E-Mail: [email protected] Um eine schnelle Bearbeitung Ihrer Bestellung zu gewährleisten, halten Sie bitte für alle Anfragen die Artikelnummer (z.B. IAN 284660) des Gerätes bereit. Die Artikelnummer entnehmen Sie bitte dem Typenschild oder dem Titelblatt dieser Anleitung. DE │ AT │ CH │...
Page 29
KOMPERNASS HANDELS GMBH BURGSTRASSE 21 DE - 44867 BOCHUM GERMANY www.kompernass.com Last Information Update · Stand der Informationen: 12 / 2016 Ident.-No.: PDSSA20-LiA1-122016-1 IAN 284660...