Table of Contents
3.2
AMI BIOS Setup
The AMI BIOS ROM has a pre-installed Setup program that allows users to modify basic
system configurations, which is stored in the battery-backed CMOS RAM and BIOS
NVRAM so that the information is retained when the power is turned off.
To enter BIOS Setup, press immediately while your computer is powering up.
The function for each interface can be found below.
Main – Date and time can be set here. Press to switch between date elements
Advanced – Enable/ Disable boot option for legacy network devices
Chipset – For hosting bridge parameters
Security – The setup administrator password can be set here
Boot – Enable/ Disable quiet Boot Option
Save & Exit –Save your changes and exit the program
Chapter 3 – AMI BIOS Setup
36
Table of Contents
