Contents 6. Other features 1. Important Information Default settings Safety Mute button Caution Passage mode Disposal of used products and batteries Verification code & local data query 2. Assembly 7. Indicators Packing list Door lock status indicator Exploded views System locking indicator Notice before assembling Assembly procedures 3.
6000 series Bridge -cut aluminum smart door lock Easy Key DDL608-5HWS User manual Warranty ww w.philips.com/support Sign your product up and get support at www.philips.com/sup- port Card ⑦ Mechanical ⑤ User ⑥ Warranty ⑧ Batteries manual card ⑪ Key tag ⑨...
Notice before assembling Step 1 | Door swing direction This product applies to doors with four opening directions: left-hand inswing, left- hand outswing, right-hand inswing, and right-hand outswing. Left-hand swing Right-hand swing Inside Inside Left-hand Right-hand inswing inswing Outside Outside Inside Inside Left-hand...
Page 8
Adjustable rear lever instructions Loosen the screw and rotate Secure the screw. the lever 180 degrees to the right position. Attention 1. Choose a proper installation kit based on the door thickness. The default tool kit applies to a door thickness of 35-60mm. Please consult the local distributor for other door thicknesses.
Assembly procedures The following assembly procedures apply to the right-hand swing doors. For left- hand swing doors, please read through the [Notice before assembling] and adjust the lever/latch direction first. To drill holes in the door according to the drilling template, mount the mortise into the jamb, and secure the anchor screws.
Page 10
Insert the connecting cables into the sockets of the interior assembly accordingly, and align the square shaft with the hole to ensure the interior assembly is firmly attached to the inner surface of the door, then secure the top and bottom of the interior assembly with M6 anchor screws.
3 Get to know your lock Exterior assembly Indicator Keypad Card reader Mute button Fingerprint sensor Exterior lever Key hole Reset and power supply interface Interior assembly Battery compartment Interior lever Reset button Cover...
4 Settings Instructions before setting ◆The system mode is divided into general mode and dual-verification mode. General mode Dual-verification mode Any enrolled access methods can Any two enrolled access methods among unlock the door PIN code, key tag, and fingerprint can unlock the door User number ◆...
Press [1] to enter the master access method settings, press [1] again to add a master access method. Add a master PIN code: Enter a new master PIN code and confirm with [#], then enter the master PIN code again and Light up the keypad confirm with [#].
Press [1] to enter the admin settings, then Add a PIN code: Enter a new user PIN code press [2] to delete an admin. and press [#] to confirm, then enter the PIN code again and confirm with [#]. After you hear a voice prompt indicating that the PIN code was added successfully, press [*] to return to the previous menu until...
Press [1] to select a user number to delete Press [1] to enable the voice guide. After the user; press [2] to delete all users. hearing a voice prompt indicating that the operation was successful, press [*] to return to previous menu until you exit the master mode.
Network settings Attention Under the dual-verification mode, any enrolled master access method can be used to open the door. Press [#] and enter the master PIN code, then confirm with [#]. Or press [#], swipe the master key tag/scan the master fingerprint to enter the master mode.
Application binding Please scan below QR code or go to App Store to search “Tuya Smart App” and download the app accordingly. 1.Connect to power supply; 2.When you are in master mode, press [4] to enter network settings, then press [1] to connect to a hotspot or press [2] for Auto Connect, log in the Tuya Smart App to complete the application binding accordingly;...
5 Get to use your lock Outdoor unlock Key tag Fingerprint PIN code Card Enter PIN reader code Keypad Fingerprint 下 sensor Press down 压 Press down 执 the lever Press down the lever 手 the lever Place the enrolled key Place the enrolled Touch to wake up the tag on the card reader.
Outdoor/Indoor locking Outdoor locking After closing the door, lift up the handle, and the latch bolt will automatically pop up to lock the door. Indoor locking After closing the door, lift up the handle, and the latch bolt will automatically pop up to lock the door. Mechanical key unlock ①...
6 Other features Default settings Function: To empty all user information and restore to default settings. How to use: Press the [RES] button for 6 seconds with a sharp object, and you will hear a voice prompt saying ”Press [#] for confirmation”, once [#] is pressed, all user information will be erased and the lock will be restored to its default settings.
Passage mode Function: After the passage mode is enabled, anyone can open the lock by pressing down on the lever without any enrolled access method. How to use: On: After verified by any enrolled master access method, the [5] key and [*] key will light up, then press [5] and confirm with [#] can turn on the passage mode.
7 Indicators Status indicator Meanings of the indicator in different colors Blue:When the system wakes up, the indicator will turn blue, indicating that the door lock Status can be processed and operated; indicator Green: When the door lock is unlocked, the indicator will turn green, indicating that the door has opened;...
8 Troubleshooting Alert types Anti-dismantling alert Way to trigger: The outside escutcheon is pried open and there is a gap of space between the door and the outside escutcheon. Way to be alerted: Repeat alerts. Way to turn off: Automatically turning off or successful identity verification or a normal way to unlock the door from inside.
How to apply an external power supply When the battery voltage is insufficient, and the door cannot be opened from the outside, you can power up the lock by connecting a 5V power bank to the Type-C port. After opening the door lock, please replace the batteries immediately.
Page 26
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of Shenzhen Conex Intelligent Technology Co., Ltd., and Shenzhen Conex Intelligent Technology Co., Ltd. is the warrantor concerning this...