Related Manuals for Philips EasyKey Alpha Series
Summary of Contents for Philips EasyKey Alpha Series
- Page 1 Easy Key Alpha series Push-pul l Smart Door Lock Alpha User manual Bluetooth Edition Register products and get suppor t on the following sites www.philips.com/suppor t...
-
Page 3: Table Of Contents
Contents 1 Important information 5 How to use your EasyKey Security Caution Unlock Disposal of used Products and batteries Unlock from outside -With a PIN code 2 Install your EasyKey -With a fingerprint -With a card Packaging list Exploded views Unlock from inside Pre-installation instructions -With handle... -
Page 4: Important Information
◆Do not forcibly disassemble ◆Please make sure any component this product to avoid triggering an replacement is executed by Philips, alarm or damaging the product. Philips authorized service center or professional technicians. ◆Do not scrape the fingerprint sensor with sharp objects, otherwise ◆Do not use accessories or parts... -
Page 5: Install Your Easykey
2 Install your EasyKey Packaging list This packaging list is for reference only. Please refer to the actual packaging contents. ① ② ③Drilling template ④Mortise Outside Inside escutcheon escutcheon (including (including silicone pad) silicone pad) EasyKey Warranty Quick Start EasyKey易锁 Card Guide EasyKey... -
Page 6: Exploded Views
Exploded Views 1. Battery cover (x1) 5. M5 chamfer 9. Compressed Spring (x1) head screw (x4) 2. M6 chamfer 10. M6 screw tube (x1) head screw (x1) 6. Mounting plate (x1) 11. Outer escutcheon 3. Inside escutcheon 7. Mortise (x1) component (x1) component (x1) 8. -
Page 7: Pre-Installation Instructions
Pre-installation instructions Step 1 | Check the door opening direction This product can be installed on doors of 4 types of opening directions: left-out pull, right-in push, right-out pull and left-in push. Left-handle open Right-handle open Indoor Indoor Left-in Right- push in push Outdoor... - Page 8 Right-out pull Left-out pull Direction of Direction of square shaft square shaft driving block driving block Inside escutcheon Inside escutcheon Screw Screw Screw Screw Right pull Right push Right pull Right push Left push Left pull Left push Left pull Attention 1.Use proper installation kit according to the door thickness.
-
Page 9: Installation Steps
Installation steps The following installation steps apply to left-open doors. For right-open doors, please read the chapter [Pre-installation instructions] carefully and make needed adjustments. Use the drilling Tighten the 4 Install the connecting template to drill anchor screws screw tubes on the the needed holes on the mortise. - Page 10 Install the compressed spring Insert the connection wire of the and square shaft into the outside escutcheon and the motor inside escutcheon accordingly. wire into the corresponding holes on the inside escutcheon, then align the square shaft on the inside escutcheon with the rotary hole on the mortise and insert...
-
Page 11: Get To Know Your Easykey
3 Get to know your EasyKey Outside escutcheon Door status indicator Fingerprint sensor Keypad Mute button Outside forced lock button Push-pull handle Low battery indicator Card reader Reset button Mechanical key hole Emergency power interface Inside escutcheon Battery cover Battery cabinet Auto/Manual mode switch Reset button... -
Page 12: How To Set Up Your Easykey
4. How to set up your EasyKey Pre-setup Instructions: ◆There are 2 operating modes in the EasyKey: General mode and dual verification mode. General mode Dual verification mode Unlock with any registered Unlock with any two of PIN identity information code, card and fingerprint ◆User Number You can delete a single user information by its user... -
Page 13: Modify Master Pin Code
User settings ◆How to enter master mode: Register a user PIN code Light up the keypad. Press [#], enter master PIN code and confirm with [#]. Press [2] to enter user registration, then press [1] to register a new user PIN code, which will be automatically numbered and broadcasted by the system. -
Page 14: Delete A User
User Information Register a fingerprint Deletion Delete a user PIN code Press [#], enter master PIN code and confirm with [#]. Press [2] to enter user settings, then press [3] Press [#], enter master PIN code and to enter fingerprint registration. The system confirm with [#]. - Page 15 Delete a one-time user PIN code Delete all fingerprints Press [#], enter master PIN code and Press [#], enter master PIN code and confirm with [#]. confirm with [#]. Press [3] to enter user deletion, then Press [3] to enter user deletion, then press [2] to enter one-time user PIN press [3] again to enter fingerprint code deletion.
-
Page 16: System Settings
System date initialization Volume settings Press [#], enter master PIN code and confirm with [#]. Press [4] to enter system settings, then press [2] to enter volume settings. Remove the battery cover and double press the [RES] button with a sharp object, until you hear a voice prompt of "Restored to factory settings". -
Page 17: Extended Functions
To join a network, press [1]. To exit Attention a network, press [2]. Before setting Directly enter 114# to start local query. up the extended functions, please download and open the Philips EasyKey APP via your mobile phone. Bluetooth Settings Attention The extended functions are optional. -
Page 18: How To Use Your Easykey
Philips EasyKey employs indoor fast Only after you double press the opening motise allowing you to directly [CLOSE] button within one second can push or pull the handle to unlock. -
Page 19: Auto/Manual Modes
Lock | Auto/Manual modes [A] represents Auto Mode, under which after you shut the door, the deadbolt will automatically pop up and the door will be locked. [M] represents Manual Mode, under which after you shut the door, the deadbolt will Auto/Manual not automatically Switch... -
Page 20: Mechanical Key Opening
Deadlock from inside After the door is locked, long press the [CLOSE] button. The button will flash once in red and there will be a voice prompt of “Inside deadlock enabled”. Attention Under inside deadlock mode, all functions of the outside escutcheon will be locked. -
Page 21: Other Functions
6 Other functions Safe handle function: Lock the handle from inside Function: Lock the handle from inside and prevent unlocking from inside. How to use: 1. Enable safe handle function: Safe handle Toggle the switch to red scale. switch 2. Disable safe handle function: Toggle the switch to green scale. -
Page 22: One-Button Mute Function
One-button mute function Function: Use only one button to mute the lock by turning off the voice guide. Applicable to the scenes where you don’t want to disturb your family. How to use: 1. Mute: When the system is awake, long press the [Mute] button for 2 seconds to enter one- time mute mode. -
Page 23: Meanings & Use Of The Indicators
7 Meanings and use of the indicators Lock status indicator Colors of the light and the corresponding meanings: Blue: After the system wakes up, the light will glow blue, indicating Lock that you can operate the lock. status indicator Green: After the door is unlocked, the light will glow green, indicating that the door has been opened. -
Page 24: Mute Mode Indicator
Mute mode indicator Colors of the light and the corresponding meanings: 1. White: Indicates the mute mode is off. 2. Green:Indicates the mute mode is on. Mute mode indicator Inside deadlock indicator When the door is inside dead locked, the digital functions of the outside escutcheon will be disabled. -
Page 25: [Close] Button Indicator
[CLOSE] button indicator Colors of the light and the corresponding meanings: 1. Red light with 2 flashes: Indicates the door has been locked. 2. Green light with 2 flashes: Indicates the door has been unlocked. 3. Red light with 1 flash: Indicates the door has been dead locked. - Page 26 Anti-dismantle alarm Triggering 1: The door is pried open and the sensor latch bolt pops up. Alarm mode: Continuous repeated alarms. Turning off: The alarm can be turned off automatically or by a successful verification. Triggering 2: Outside escutcheon is pried open and there is no fit to the door.
-
Page 27: How To Apply An Emergency
How to apply an emergency power When the battery voltage is insufficient, and the door cannot be opened from the outside, you can power the lock through the Micro USB interface by using a 5V power bank as an emergency power Reset button supply. - Page 28 Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of Shenzhen Conex Intelligent Technology Co., Ltd. and Shenzhen Conex Intelligent Technology Co., Ltd. is the warrantor in...