Protecting The Environment; Installer Checklist To Be Completed By Installer; Upon Installation - Bosch Therm C 1210 ES Installation And Operating Instructions Manual
Indoor residential and commercial models
Hide thumbs
Also See for Therm C 1210 ES:
- Applications manual (40 pages) ,
- Technical service bulletin (2 pages) ,
- Installation manual (72 pages)
Table of Contents
14
Protecting the environment
Packing
The packing box may be fully recycled as confirmed by the
recycling symbol
.
Components
Many parts in the heater can be fully recycled in the end of the
product life. Contact your city authorities for information about
the disposal of recyclable products.
Saving water resources:
▶ Make sure you close all the taps after any use. Avoid leaving
the taps dripping. Repair any leaking tap.
▶ Define the temperature you want, in the appliance or with
the remote control. This way you have the precise water
flow needed (mixing cold water to regulate temperature will
increase the water flow with consequent waste of water).
C 1210ES/ESC – 6 720 644 887 (2022/04)
15
Installer Checklist to be completed by
installer upon installation
Serial Number
(8 digit serial number is
located on rating plate on
right side panel)
1)
Gas Pressure Reading
Static
Operating
Water Pressure
Building Water Pressure
Range if on Well system
Installing Company
Installer name
Address
Phone
1) See Chapter 4.14, page 44 and gas pressure table (to be
filled out by installer)
Table 47
Installation manual should be left with the owner after the
installation is tested and completed.
Protecting the environment
___ ___ ___ ___ ___ ___ ___ ___
83
Table of Contents
