Testing The Microvission Panel Connections - Emerson VILTER MicroVission Operation And Service Manual
Hide thumbs
Also See for VILTER MicroVission:
- Operation and service manual (116 pages) ,
- Retrofit manual (20 pages)
Table of Contents
Appendix D • Compressor Sequencing Setup
Testing the MicroVission panel connections
After the MicroVission panels have been added to the
Devices List, it is a good idea to test out the network con-
nections to these devices. Reference Figure D-11.
Highlight the MicroVission panel that you'd like to test.
Then press the "Test Connection" button. An informa-
tional window will appear showing if the test was suc-
cessful or not. If the test is unsuccessful, double check
the Ethernet settings to ensure that those parameters in
the MicroVission panels are configured properly.
Continue to select the compressors listed in the Devices
List and test the connection of all compressors.
Figure D-11. Testing Connection in Compressor Sequencing Screen
D − 14
MicroVission Controller • Operation and Service Manual • Emerson • 35391MV 1.3
Table of Contents
