Related Manuals for Emerson uerdant VX Series
Summary of Contents for Emerson uerdant VX Series
- Page 1 VX3-HW-KT-W VX Series Wireless Energy Management Thermostat with an Occupancy Sensor and High Voltage HVAC Controller INSTALLATION MANUAL SEPTEMBER 2020...
-
Page 2: Table Of Contents
Table of Contents 1. Before You Begin ....................6 1.1 Equipment Nomenclature .................. 6 1.2 Installation Considerations ................. 7 1.3 Installation on a Bare Wall ................... 8 1.4 Installation Using a Wall Plate ................9 2. Notice.........................10 3. Network Installation ...................11 3.1 Connecting the Antenna Module .............. - Page 3 Table of Contents Introduction 8. Troubleshooting ....................33 Verdant VX Series Energy Management Thermostats deliver unprecedented energy Error Codes ......................33 savings without compromising the comfort of occupants. Restoring Factory Settings ..................34 An Integrated occupancy sensor uses a combination of motion and thermal sensing 9.
-
Page 4: Before You Begin
Before You Begin Before You Begin Equipment Nomenclature Installation Considerations Selecting the appropriate installation location of the thermostat and any accessories Before you begin installing Verdant equipment, we recommend you familiarize is crucial to the proper operation of your Verdant energy management system. The yourself with the various components that may be included in your shipment. -
Page 5: Installation On A Bare Wall
Before You Begin Before You Begin Installation on a Bare Wall Installation Using a Wallplate Select the appropriate installation location for the thermostat. Refer to Select the appropriate installation location for the thermostat. Refer to ➤ ➤ installation considerations section of this manual; installation considerations section of this manual;... -
Page 6: Notice
Network Installation Connecting the Antenna Module NOTICE TO ENABLE NETWORKING CAPABILITIES OF THE VX THERMOSTAT, REFER TO THE “NETWORK INSTALLATION” SECTION OF THIS MANUAL. BEFORE STARTING THE INSTALLATION OF THE NETWORKED THERMOSTATS, ENSURE THAT THE ONLINE CONNECTION KIT IS CONNECTED TO THE INTERNET. -
Page 7: Connecting The Ethernet Cable
Network Installation Network Installation Connecting the Ethernet Cable Powering on the Server Connect the Server to the LAN port with the supplied RJ-45 cable. Plug the Server into an electrical outlet with the supplied power cord. ➤ ➤ TO PREVENT POWER RELATED ISSUES, PLUG THE SERVER INTO A UPS (UNINTERRUPTED POWER SUPPLY) UNIT. -
Page 8: Configuring The Online Connection Kit
Network Installation HVAC Controller Installation Configuring the Online Connection Kit High voltage HVAC Controller installation Ensure the Online Connection Kit is receiving a Private or Static IP address via The high voltage HVAC Controller can control HVAC units that would typically use ➤... -
Page 9: Thermostat Installation
Thermostat Installation HVAC Controller Installation High voltage HVAC Controller installation (cont’d) Mounting the Thermostat to the Wall The thermostat can control units using line voltage valves (heating and cooling) and Select the appropriate installation location for the thermostat, taking into ➤... -
Page 10: Thermostat Configuraton
Thermostat Confi guration Thermostat Confi guration Confi guring the Thermostat Accessing the Confi guration Screen With the thermostat and HVAC unit powered, follow the confi guration instructions Ensure the thermostat is powered and faceplate removed; ➤ to correctly confi gure the thermostat. Press the confi g button;... -
Page 11: Setting The Mesh Id
Thermostat Confi guration Thermostat Confi guration Pairing the Thermostat and HVAC Controller Setting the MESH ID Press the FAN button to advance to the next digit; ➤ Each wireless thermostat must be paired with an individual HVAC Controller during Press the UP and DOWN buttons to increase or decrease the value; ➤... -
Page 12: Entering The Room Number
Thermostat Confi guration Thermostat Confi guration Entering the Room Number Confi guring the Equipment Settings Enter the room number by changing the characters on the screen. Enter the equipment code by changing the digits on the screen. Refer to the table Available characters include digits 0-9 and letters A-F. -
Page 13: Setting The Thermostat Clock
Thermostat Confi guration Thermostat Confi guration Confi guring the Energy Saving Settings Setting the thermostat clock HOURS MINUTES Press the UP and DOWN buttons to increase or decrease the energy savings Set the thermostat clock to current time in 24h (Military Time) format. ➤... -
Page 14: Testing The Thermostats
Thermostat Configuration Thermostat Maintenance Testing the Thermostat Replacing Thermostat Batteries Following the thermostat configuration, test if the thermostat is controlling the HVAC The low battery indicator will be displayed on the thermostat screen when it is necessary unit. to replace batteries in the thermostat. Ensure the thermostat is powered and the faceplate is on. -
Page 15: Accessing The Sensor Setup Menu
Confi guring & Managing Accessories Confi guring & Managing Accessories Accessing the Sensor Setup Menu Activating a Sensor With the thermostat and HVAC unit powered, follow the sensor confi guration Remove the cover of the sensor(s) to be paired in the room; ➤... -
Page 16: Configure The Functionality Of A Sensor
Confi guring & Managing Accessories Confi guring & Managing Accessories Discovering an Active Sensor Confi guring the Functionality of a Sensor The thermostat will display the fi rst sensor discovered in the pairing process. Ensure The user must confi gure the type of sensor being paired with the HVAC Controller. that the unique device number displayed on the screen matches the unique ID found Use the table below to confi gure the correct sensor functionality. -
Page 17: Completing The Sensor Setup
Confi guring & Managing Accessories Troubleshooting Completing the Sensor Setup Error Codes ERR 1 Thermostat Temperature Sensor Hardware Defect ERR 2 Thermostat Radio Hardware Defect ERR 3 Thermostat Radio Software Defect ERR 4 No link with the HVAC Controller ERR 5 Thermostat Memory Defect Press the FAN button to pair the sensor with the thermostat.Press the ON/OFF ➤... -
Page 18: Restoring Factory Settings
Troubleshooting Guide APPENDIX 1 - Energy Saving Presets Restoring Factory Settings Level Level Level Level Level Level If there are reported errors or configuration issues, the user may restore factory settings to return the thermostat to its default parameters. Fan Control Mode AUTO AUTO AUTO... -
Page 19: Warranty Information
APPENDIX 2 - Glossary Warranty Information “Automatic Fan Control Mode” - fan runs only when there detected in order to enter the “Guest Occupancy” mode; For the most recent warranty information, please visit www.verdant.co/verdant-warranty. is a demand for heating or cooling; “Night Occupancy Threshold”... - Page 20 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
-
Page 21: Technical Specifications
Technical Specifications Thermostat HVAC Controller Case Dimensions (Imperial) 4.02 x 5.51” x 0.93” 4.84” x 2.76” x 1.02” Case Dimensions (Metric) 102mm x 140mm x 23.5mm 98mm x 54mm x 19mm Screen Dimensions (Imperial) 3.63” x 2.13” Screen Dimensions (Metric) 92mm x 54mm Operating Voltage 2 “AA”...