Chapter 10 - Maintenance And Troubleshooting; Repairs; Maintenance; Clean The Scanner - Honeywell HF680 Series User Manual
Hand-free area-imaging scanners
Hide thumbs
Also See for HF680 Series:
- User manual (66 pages) ,
- Quick start manual (14 pages) ,
- User manual (51 pages)
Table of Contents
CHAPTER
1 0
MAINTENANCE AND
TROUBLESHOOTING
Repairs
Repairs and/or upgrades are not to be performed on this product. These services
are to be performed only by an authorized service center (see
page ix).
Maintenance
Your device provides reliable and efficient operation with a minimum of care.
Although specific maintenance is not required, the following sections describe
periodic checks to ensure dependable operation.
Clean the Scanner
The scanner and scanner window may be cleaned with a soft cloth dampened with
water or a mild detergent-water solution. If a mild detergent solution is used, wipe
the scanner or base with a clean cloth dampened only with water to remove any
detergent residue.
Note: Reading performance may degrade if the scanner's window is not clean. If the window
is visibly dirty, or if the scanner isn't operating well, clean the window.
Caution: Do not submerge the scanner in water or cleaning solution.
Caution: Ensure all components are dry prior to mating the scanner with
HF680 Series User Guide
Do not use abrasive wipes or cloths on the scanner's window.
Abrasive wipes may scratch the window. Never use solvents
(e.g., acetone) on the housing or window. Solvents may damage
the finish or the window.
charging accessories or other peripheral devices. Mating wet
components may cause damage not covered by the warranty.
Customer Support
on
157
Hide quick links:
Table of Contents
