Test Menu; Ezconfig For Scanning Introduction - Honeywell HF680 Series User Manual
Hand-free area-imaging scanners
Hide thumbs
Also See for HF680 Series:
- User manual (66 pages) ,
- Quick start manual (14 pages) ,
- User manual (51 pages)
Table of Contents
Test Menu
When you scan the Test Menu On code, then scan a programming code in this
manual, the scanner displays the content of a programming code. The
programming function will still occur, but in addition, the content of that
programming code is output to the terminal.
Note: This feature should not be used during normal scanner operation.
EZConfig for Scanning Introduction
EZConfig for Scanning provides a wide range of PC-based programming functions
that can be performed on a scanner connected to your PC. EZConfig for Scanning
allows you to download upgrades to the scanner's firmware, change programmed
parameters, and create and print programming barcodes. Using EZConfig for
Scanning, you can even save/open the programming parameters for a scanner.
This saved file can be e-mailed or, if required, you can create a single barcode that
contains all the customized programming parameters and mail or fax that barcode
to any location. Users in other locations can scan the barcode to load in the
customized programming.
EZConfig for Scanning Operations
The EZConfig for Scanning software performs the following operations:
Scan Data
Scan Data allows you to scan barcodes and display the barcode data in a window.
Scan Data lets you send serial commands to the scanner and receive scanner
response that can be seen in the Scan Data window. The data displayed in the Scan
Data window can either be saved in a file or printed.
Configure
Configure displays the programming and configuration data of the scanner. The
scanner's programming and configuration data is grouped into different
categories. Each category is displayed as a tree item under the "Configure" tree
124
On
* Off
HF680 Series User Guide
Hide quick links:
Table of Contents
