Honeywell HF680 User Manual
  1. Manuals
  2. Brands
  3. Honeywell Manuals
  4. Scanner
  5. HF680
  6. User manual

Honeywell HF680 User Manual

Hand-free area-imaging scanner
Hide thumbs Also See for HF680:
Table of Contents

Quick Links

HF680
Hand-free Area-Imaging Scanner
桌面型影像式读码器
User's Guid
用户指南
Table of Contents
loading

Related Manuals for Honeywell HF680

Summary of Contents for Honeywell HF680

  • Page 1 HF680 Hand-free Area-Imaging Scanner 桌面型影像式读码器 User’s Guid 用户指南...

  • Page 2: Disclaimer

    免责声明 Honeywell International Inc. (“HII”) reserves the right to makes changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII.

  • Page 3: Table Of Contents

    目录 Table of Contents Disclaimer .......................... 2 免责声明 ........................... 2 Table of Contents 目录 ......................3 Customer Support 客户支持 ......................6 Technical Assistance 技术支持 ....................6 Product Service and Repair 产品服务与维修 ................6 Limited Warranty 有限质量保证 ....................6 Send Feedback 信息反馈......................6 Getting Started 引言...
  • Page 4 Illumination LED Mode LED 灯发光模式 ................15 Illumination wakeup in Presentation 自动扫描模式下唤醒照明 ..........16 Indicate LED Mode LED 工作模式 ..................16 BEEPER 蜂鸣器 ........................16 IR SWITCH 红外开关 ......................17 IR interval time Outs 红外间隔超时设置 .................. 17 Same Symbol Time Outs 同一条码超时设置 ................18 Inter-Character Data Transmission Delays 字符间数据传输延时...
  • Page 5 2, Micro-PDF417 ......................33 3, Codablock A ......................... 33 4, Codablock F ......................... 33 5, Data Matrix 数据矩阵 ....................33 6, Aztec Code ........................33 7, MaxiCode ........................33 8, QR Code 二维码 ......................34 9, Micro QR Code 微型二维码 ..................34 10, DPM Code DPM 条码...

  • Page 6: Customer Support 客户支持

    联系电话：www.honeywellaidc.com/locations 有关我们最新的联系信息，请访问我们的网站上面的链接。 Product Service and Repair 产品服务与维修 Honeywell International Inc. provides service for all of its products through service centers throughout the world. To obtain warranty or non-warranty service, please visit www.honeywellaidc.com and select Support>Contact Service and Repair to see your region’s instructions on who to obtain a Return Material Authorization (RMA#). You should do this prior to returning the product.

  • Page 7: Getting Started 引言

    用户指南主要提供 HF680 有线式影像式读码器的安装和设置说明，包括产品规格、尺寸、质保以及客户支持等 信息。 Honeywell barcode scanners are factory programmed for the most common terminal and communications settings. If you need to change these settings, programming is accomplished by scanning the bar codes in this guide. 霍尼韦尔条码读码器在出厂时预设了最常用的终端和通信设置。如果您需要修改这些设置，可以扫描本手册中...
  • Page 8 2. The scanner beeps. 3. Verify the scanner operation by scanning a barcode from the Sample Symbols in the back of this manual. The unit defaults to a USB PC Keyboard. 2. 读码器发出蜂鸣声。 3. 扫描本手册封底 Sample Symbols（示例条码）中任一条码，确认读码器能够正常工作。该设 备默认设置为 USB PC 键盘。 1 - 2...

  • Page 9: Connecting With Rs232 Serial Port 通过 Rs232 串口连接

    2. Connect the appropriate interface cable to the device. 1. 关闭终端/计算机电源。 2. 使用合适的连接线，连接到设备上。 Note: For the scanner to work properly, you must have the correct cable for your type of terminal/computer. 备注：必须使用与终端/计算机配套的连接线，才能确保读码器正常工作。 HF680 RS232 Serial Port Connection: HF680 RS232 串口连接： Power Adapter (if included) 电源适配器（附带时）...

  • Page 10: Barcode Configuration Guide 条码配置指南

    Your new scanner has been configured at the factory with a set of default communication protocol. Since many host systems have unique formats and protocol requirements, Honeywell provides a wide range of configurable features that may be selected with the use of this barcode configuration guide.

  • Page 11: Factory Default Settings 出厂默认设置

    Multi-Code Method 多条码方法 All features can be enabled or disabled using the Multi-Code Method. 使用多条码方法可以启用或禁用所有功能。 A features marked with a “~” requires the Multi-Code Method. 标有“~”的功能都需要采用多条码方法。 Power up the scanner. Scan the Enter/Exit Configuration Mode barcode. [3 beeps] Scan the barcode(s) for the desired feature(s). [1 beep] Scan the Enter/Exit Configuration Mode barcode [3 beeps] and save new configuration.

  • Page 12: Get Firmware Revision Number 获取固件版本号

    获取固件版本号 Get Firmware Revision Number Scan the following barcode, scanner will output the software revision number. 扫描以下条码，读码器就会输出软件版本号。 Firmware Revision 固件版本号 Get Product Serial Number 获取产品序列号 Scan the following barcode, scanner will output the product serial number. It’s a unique number to each unit. 扫描以下条码，读码器就会输出产品序列号。每个读码器都有独一无二的序列号。...
  • Page 13 Note: In this mode, the unit work Note: In this mode, the unit work with IR Trigger to detect object. with optical trigger & IR Trigger to When IR is trigger on, it will start detect barcode symbol. When to scan and decode bar code optical trigger is trigger on, it will symbols.

  • Page 14: Programming The Interface

    接口编程设置 Programming the Interface 简介 Introduction This chapter describes how to program your system for the desired interface. Currently the scanner support three kinds of communication interface, RS232, USB HID and USB Serial. You can scan the following barcodes to switch the scanner into specific interface. You should also change the cable after that.

  • Page 15: Rs232 Settings Rs232 设置

    Note: No extra configuration (e.g., baud rate) is necessary. 备注：无需额外的配置（比如波特率等）。 RS232 Settings RS232 设置 Factory default settings of RS232 interface are in the below table. RS232 接口的出厂默认设置如下表所示。 Option Setting 项目 设置 Baud Rate 115,200 bps 波特率 Data Format 8 data bits, no parity bit, 1 stop bit 数据格式...
  • Page 16 19200 9600 4800 2400 1200 2. Parity Features 校验功能 A parity bit is an extra data bit used for help catch data transmission errors. The scanner’s parity must match the host’s parity. 校验位是额外的一个数据位，用于发现数据传输过程中出现的错误。读码器的校验设置必须和主机一致。 *No Parity *无校验 Odd Parity Even Parity 奇校验...
  • Page 17 7 Data Bits *8 Data Bits 7 数据位 *8 数据位 *1 Stop Bits 2 Stop Bits *1 停止位 2 停止位 4. Hardware Handshaking 硬件握手 When enable this feature, scanner will output a Request to Send (RTS) signal and wait for a Clear to Send(CTS) signal before transmitting data.
  • Page 18 Invert CTS Polarity *Standard CTS Polarity 相反的 CTS 极性 *标准 CTS 极性 *Activate RTS,wait for CTS Activate RTS, Do not wait for CTS. *激活 RTS，等待 CTS 激活 RTS，不等待 CTS。 5. Software Handshaking 软件握手 Enable XON/XOFF Handshaking *Disable XON/XOFF Handshaking 启用 XON/XOFF 握手 *禁用...
  • Page 19 Support BEL/CAN in ACK/NAK *Ignore BEL/CAN in ACK/NAK 在 ACK/NAK 中支持 BEL/CAN *在 ACK/NAK 中忽略 BEL/CAN If enable this feature, when BEL(07H) is received, the scanner beeps 3 times and exits the communications loop. If a CAN(18H) is received, then the scanner will exit the communications loop silently. 若启用该功能，则在接收到...

  • Page 20: Input/Output Settings 输入 / 输出设置

    Input/output Settings 输入 / 输出设置 Illumination LED Setup LED 灯设置 Use these codes to control illumination LED ON/OFF. 使用以下条码可控制 LED 灯的开/关。 *Illumination LED ON Illumination LED OFF *打开 LED 灯 关闭 LED 灯 灯亮度等级 Illumination LED Level LED Use these codes to control illumination level 使用以下条码可控制...

  • Page 21: Illumination Led Mode Led 灯发光模式

    *High level *高亮度 Illumination LED Mode LED 灯发光模式 Use these codes to control illumination mode 使用以下条码可控制 LED 灯的发光模式 paper illumination *paper & Cellphone 纸张照明 *纸张和手机照明 Pure cellphone 纯手机照明 4 - 1...

  • Page 22: Illumination Wakeup In Presentation 自动扫描模式下唤醒照明

    自动扫描模式 Illumination wakeup in Presentation 下唤醒照明 Use these codes to wakeup illumination to fast detect object, only work for presentation mode 使用以下条码可唤醒照明以快速探测目标，仅适用于自动扫描模式 *Enable Disable *启用 禁用 工作模式 Indicate LED Mode LED Use these codes to control indicate LED mode 使用以下条码可控制 LED 灯的工作模式 *Led always on Led always off *常亮...

  • Page 23: Ir Switch 红外开关

    * Beep enable (2700HZ) Beeper disable *启用蜂鸣器（2700HZ） 禁用蜂鸣器 IR SWITCH 红外开关 Use these codes to control IR ON/OFF 使用以下条码可控制红外开/关 *IR on IR off *红外开 红外关 红外间隔超时设置 IR interval time Outs Use these codes to control IR interval time Out 使用以下条码可控制红外间隔超时设置 Interval time out 50 ms *Interval time out 250 ms 间隔超时...

  • Page 24: Same Symbol Time Outs 同一条码超时设置

    同一条码超时设置 Same Symbol Time Outs These numbers determine the length of time before a barcode can be rescanned after it is removed from the scan field. Single code fixed settings in msecs of No, 50,100,200,750,1200(1.2 sec),2000(2.0 sec) and infinite are available. User configurable values can be set in user-configurable increments of 50 msecs to 6350 msecs (6.35 sec).
  • Page 25 Infinite Same Symbol Time Out ~ Variable Same Symbol Time Out 无限超时设置 ~可变超时设置 Using the Multi-Code Method, scan this barcode and a code The scanner will not repetitively byte sequence from section “Code Byte Usage” to set the Scan the same barcode. same symbol time-out duration.

  • Page 26: Inter-Character Data Transmission Delays 字符间数据传输延时

    字符间 Inter-Character Data Transmission Delays 数据传输延时 Use these codes to select the amount of delay between sending data characters and “Bar Code” records from the scanner to the host. This helps prevent the scanner from overflowing host input buffers. 使用以下条码可以设置从读码器向主机发送数据字符和“条形码”记录时的延时长短。这样有助于避免读码器造成 主机输入缓冲区溢出。...

  • Page 27: Communication Time Out Options 通信超时设置

    Communication Time Out Options 通信超时设置 Enable Communications Time Outs *Disable Communications Time Outs *禁用通信超时设置 启用通信超时设置 ~ Variable Communications Time Out * Default Communications Time Out (2 secs) Unit: 50 ms. ~可变通信超时设置 *默认通信超时设置（2 秒） 单位：50 毫秒 Short Communications Time Out (1 sec ) Long Communications Time Out (4 secs) 短通信超时设置（1 秒）...
  • Page 28 Razzberry Tone on Time Out * No Razzberry Tone on Time Out 超时则发出 Razzberry 铃声 *超时不发出 Razzberry 铃声 3 – 4...

  • Page 29: Data Editing 数据编辑

    Data Editing 数据编辑 CR/LF Suffix Settings CR/LF 后缀设置 1, CR Suffix Setting CR 后缀设置 *Enable CR Suffix Disable CR Suffix *启用 CR 后缀 禁用 CR 后缀 2, LF Suffix Settings LF 后缀设置 *Enable LF Suffix Disable LF Suffix *启用 LF 后缀 禁用...
  • Page 30 启用忽略 http *禁用忽略 http 5 – 3...

  • Page 31: Symbologies 条码类型

    条码类型 Symbologies In this section, contains all the configuration barcodes to switch each symbology on/off. 本节主要介绍用于开/关每种条码类型的配置条码。 1D Barcode Type Settings 1D 条码类型设置 1, UPC/EAN *Enable UPC/EAN Disable UPC/EAN *启用 UPC/EAN 禁用 UPC/EAN *Enable UPC-A Disable UPC-A *启用 UPC-A 禁用 UPC-A *Enable UPC-E Disable UPC-E *启用...

  • Page 32: 2, Code128

    Note: Enable this feature may cause normal EAN or UCC barcode decode fail. 备注：启用该功能可能导致普通 或 条码解码失败。 2, Code128 *Enable Disable *启用 禁用 3, Coupon Code 128 Enable *Disable 启用 *禁用 4, EAN99 Coupon Enable *Disable 启用 *禁用 5, Number System 4 Coupon Code 128 Enable *Disable 启用...

  • Page 33: 7, Trioptic Code

    *Do Not Transmit Mode 43Check Digit on Code 39 Transmit Mode 43 Check Digit on Code 39 *不 传输 Code 39 条码的 MOD 43 校验位 传输 Code 39 条码的 MOD 43 校验位 Enable Full ASCII Code 39 *Disable Full ASCII Code 39 启用全...

  • Page 34: 9, Standard 2 Of 5 标准 25 码

    标准 码 9, Standard 2 of 5 *Enable Disable *启用 禁用 10, Matrix 2 of 5 矩阵 码 *Enable Disable *启用 禁用 *Disable checksum checking Enable checksum checking *禁用校验和校验 启用校验和校验 Enable checksum checking and strip the checksum from the result string 启用校验和校验，并将校验和从结果字符串中删除...

  • Page 35: 13, Code 93

    13, Code 93 *Enable Disable *启用 禁用 14, Code 11 *Enable Disable *启用 禁用 15, Telepen Enable *Disable *禁用 启用 16, MSI Plessey Enable *Disable 启用 *禁用 17, RSS 14 Enable *Disable 启用 *禁用 Do Not Transmit RSS 14 *Transmit RSS 14 Check Digit Check Digit 不传输...

  • Page 36: 18, Rss Limited

    Transmit RSS 14 *Do Not Transmit RSS 14 Symbology ID Symbology ID *不 传输 RSS 14 条码 ID 传输 RSS 14 条码 ID 18, RSS Limited Enable *Disable 启用 *禁用 *Transmit RSS Limited Check Digit Do Not Transmit RSS Limited Check Digit *传输...

  • Page 37: Postal Codes Settings 邮政条码设置

    Postal Codes Settings 邮政条码设置 Note: Only one Postal Code selection can be active at one time. 备注：一次只能激活一种邮政条码。 香港 码 1, Hong Kong 2 of 5 Enable *Disable *禁用 启用 澳大利亚邮政条码 2, Australian Post Enable *Disable *禁用 启用 英国邮政条码 3, British Post Enable *Disable *禁用...

  • Page 38: 7, Netherlands Post 荷兰邮政条码

    *Enable Disable *启用 禁用 7, Netherlands Post 荷兰邮政条码 Enable *Disable *禁用 启用 条码 8, Postnet Code Postnet Enable *Disable *禁用 启用 全球邮政条码 9, Planet Code Enable *Disable 启用 *禁用 5 - 7...

  • Page 39: Barcodes Type Settings 2D 条码类型设置

    2D Barcodes Type Settings 条码类型设置 1, PDF417 Enable *Disable 启用 *禁用 2, Micro-PDF417 Enable *Disable 启用 *禁用 3, Codablock A Enable *Disable *禁用 启用 4, Codablock F Enable *Disable 启用 *禁用 5, Data Matrix 数据矩阵 Enable *Disable 启用 *禁用 6, Aztec Code Enable *Disable *禁用...

  • Page 40: 8, Qr Code 二维码

    二维码 8, QR Code *Enable Disable 启用 *禁用 9, Micro QR Code 微型二维码 Enable *Disable 启用 *禁用 条码 10, DPM Code DPM Dot peen DPM Enable *Disable 启用电针式 DPM 码 *禁用 Reflective DPM Enable 启用反光 DPM 码 5 - 9...

  • Page 41: Product Specifications 产品规格

    Product Specifications 产品规格 MECHANICAL 机械参数 Dimensions (L x W x H): 85 mm x 88mm x 139 mm 外形尺寸（长 x 宽 x 高）： 85 mm x 88mm x 139 mm Weight: 278 +/-10g 重量：278 +/-10g ELECTRICAL 电气参数 Input Voltage: 5 VDC ±0.5V 输入电压：5 VDC ±0.5V Operating Power: 2.0 W (400 mA @ 5V) 运行功耗：2.0 W (400 mA @ 5V)
  • Page 42 NARROW WIDTH DEPTH OF FIELD 5.0 mil Code 39 10 mm – 70 mm 6.7 mil PDF 0 mm – 80 mm 10 mil DM 5 mm – 80 mm 13 mil UPC-A 0 mm – 165 mm 20 mil Code 39 0 mm –...

  • Page 43: Standard Cable Pinouts 标准电缆引脚

    Standard Cable Pinouts 标准电缆引脚 Note: The following pin assignments are not compatible with Youjie legacy products. Use of a cable with improper pin assignments may lead to damage to the unit. Use of any cables not provided by the manufacturer may result in damage not covered by your warranty.

  • Page 44: Maintenance And Troubleshooting 维护与故障处理

    Maintenance and Troubleshooting 维护与故 障处理 维修 Repairs Repairs and/or upgrades are not to be performed on this product. These services are to be performed only by an authorized service center (see Technical Assistance on page Customer Support). Technical 严禁对产品进行维修和/或升级。只能由经授权的服务中心进行此类操作（参见客户支持页面 Assistance（技术服务）部分）。 Maintenance 维护...

  • Page 45: Inspecting Cords And Connectors 检查线缆和接头

    The interface cable is designed to be field replaceable. 标准接口电缆通过一个 10 针模块化接头连接至读码器。正确放置时，接头会正好固定到读码器中一个柔性插槽 内。接口电缆可现场更换。 • Order replacement cables from Honeywell or from an authorized distributor. • When ordering a replacement cable, specify the cable part number of the original interface cable. • 从霍尼韦尔或授权分销商订购备用电缆。...

  • Page 46: Code Byte Usage 条码字节用法

    Code Byte Usage 条码字节用法 Is the scanner having trouble reading your symbols? 读码器是否无法正常读取条码？ If the scanner isn’t reading symbols well, check that the scanner window is clean and that the symbols: 如果读码器无法正常读取条码，请检查读码器窗口是否清洁，并确保条码： • Aren’t smeared, rough, scratched, or exhibiting voids. •...
  • Page 47 If the scanner still can’t read the sample bar codes, scan All Symbologies (see Chapter 如果读码器无法读取示例条码，扫描 Symbologies（所有条码）（参见 Chapter 5.第 5 章）。 If you aren’t sure what programming options have been set in the scanner, or if you want the factory default settings restored, refer to Factory Default Settings on page 1-5.
  • Page 48 Code Byte 0 Code Byte 1 条码字节 0 条码字节 1 Code Byte 2 Code Byte 3 条码字节 2 条码字节 3 Code Byte 4 Code Byte 5 条码字节 4 条码字节 5 Code Byte 6 Code Byte 7 条码字节 6 条码字节 7 Code Byte 8 Code Byte 9 条码字节...

  • Page 49: Reference Charts 参考图表

    参考图表 Reference Charts Symbology Charts 条码表 Note: “m” represents the AIM modifier character. Refer to International Technical Specification, Symbology Identifiers, for AIM modifier character details. 备注：”m”表示 AIM 转义字符。关于 AIM 转义字符的详情请参见条码标识符国际技术规范。 Prefix/Suffix entries for specific symbologies override the universal (All Symbologies, 99) entry. 特定条码的前缀/后缀项优先级高于通用项（所有条码，99）。...
  • Page 50 GS1 DataBar Limited GS1 DataBar Expanded GS1-128 2 of 5 25 码 China Post (Hong Kong 2 of 5) 中国邮政（香港 25 码） Interleaved 2 of 5 0, 1, 3 交叉 25 码 Matrix 2 of 5 矩阵 25 码 NEC 2 of 5 NEC25 码...

  • Page 51: 2D Symbologies 二维条码

    Possible modifiers Symbology 条码类型 可能的转义字符(m) UPC-A with Add-On UPC-A（带附加码） UPC-A with Extended Coupon Code UPC-A（带优惠券扩展码） UPC-E UPC-E with Add-On UPC-E（带附加码） UPC-E1 2D Symbologies 二维条码 Possible modifiers Symbology 条码类型 可能的转义字符(m) All Symbologies 所有条码 Aztec Code 0-9, A-C Chinese Sensible Code (Han Xin Code) Codablock A 0, 1, 4, 5, 6 Codablock F...
  • Page 52 Possible modifiers 条码类型 可能的转义字符(m) All Symbologies 所有条码 Australian Post British Post...

  • Page 53: Ascii Conversion Chart (Code Page 1252) Ascii 码表（代码页 1252

    Possible modifiers Symbology 条码类型 可能的转义字符(m) Canadian Post China Post InfoMail Intelligent Mail Bar Code Japanese Post KIX (Netherlands) Post Korea Post Planet Code Postal-4i Postnet ASCII Conversion Chart (Code Page 1252) ASCII 码表（代码页 1252） In keyboard applications, ASCII Control Characters can be represented in 3 different ways, as shown below. The CTRL+X func- tion is OS and application dependent.
  • Page 54 list, Delete CTRL+ L left align 删除 列表， 左对齐 Enter / Ret CTRL+ M 回车/换行 Insert CTRL+ N 插入 新建 CTRL+ O Open 退出 打开 CTRL+ P Print 打印 Home CTRL+ Q Quit 主页 退出 PrtScn CTRL+ R 截屏 Backspace CTRL+ S Save 退格...

  • Page 55: Lower Ascii Reference Table 小写 Ascii 参照表

    Non-printable ASCII control Keyboard Control + ASCII (CTRL+X) Mode characters 键盘控制+ASCII（CTRL+X）模式 无法显示的 ASCII 控制字符 Windows Mode Control + X Mode On (KBDCAS2) Windows 模式下启用控制+X 功能（KBDCAS2） Control + X Mode Off (KBDCAS0) Char CTRL + X CTRL + X function 关闭控制+X 功能（KBDCAS0） 十进制...
  • Page 56 < > ⌂...
  • Page 57 Extended ASCII Characters 扩展 ASCII 字符 CP 1252 ASCII Alternate Extended PS2 Scan Code PS2 扫描码 十进制 十六进制 扩展字符 € Ç 0x48 up arrow ↑ 向上箭头↑ ü 0x50 down arrow ↓ 向下箭头↓ ‚ é 0x4B right arrow → 向右箭头→ ƒ â...
  • Page 58 ¡ í Left Alt 0x38 左 Alt ¢ ó Left Ctrl 0x1D 左 Ctrl £ ú Left Shift 0x2A 左 Shift ¤ ñ Right Shift 0x36 右 Shift ¥ Ñ Print Screen 截屏 ¦ ª 0x0F 制表键 § º 0x8F Shift Tab Shift+制表键...
  • Page 59 Extended ASCII Characters (Continued) 扩展 ASCII 字符（续） CP 1252 ASCII Alternate Extended PS2 Scan Code PS2 扫描码 十进制 十六进制 扩展字符 ³ │ ´ ┤ µ ╡ ¶ ╢ · ╖ ¸ ╕ ¹ ╣ º ║ » ╗ ¼ ╝ ½...

  • Page 60: Iso 2022/Iso 646 Character Replacements Iso 2022/Iso 646 替换字符

    If this is the case, select the code page with which the bar codes were created. The data characters should then appear properly. 代码页定义了如何将字符代码映射到实际字符。如果接收到的数据无法显示为正确的字符，很有可能是因为扫描条码使用的 代码页与运行的主机程序设置不一致。在这种情况下，请选择与扫描条码一致的代码页。然后，数据就可以正常显示了。 Code Page Selection Method/Country Standard Keyboard Country Honeywell Code Page Option 代码页选择方法/国家 标准 键盘地区设置 霍尼韦尔代码页选项 United States...
  • Page 61 Default “Automatic National Character replacement” will select the below Honeywell Code Page options for Code128, Code 39 and Code 93. 默认 “ 国家字符集自动转换 ” 选项会为 Code 128 、 Code 39 和 Code 93 选择以下霍尼韦尔代码页选项。 United States ISO/IEC 646-06 美国 Canada ISO /IEC 646-121 加拿大...
  • Page 62 Code Page Selection Method/Country Standard Keyboard Country Honeywell Code Page Option 代码页选择方法/国家 标准 键盘地区设置 霍尼韦尔代码页选项 Germany ISO/IEC646-21 德国 Switzerland ISO /IEC 646-CH 瑞士 Sweden / Finland (extended Annex C) ISO/IEC 646-11 瑞典/芬兰（扩展附录 C） Ireland ISO /IEC 646-207 爱尔兰 Denmark ISO/IEC 646-08 丹麦...

  • Page 63: Sample Symbols

    · ¡ Ñ Ç ¿ ´ ñ ç ¨ 国家 ES ISO / IEC 646 National Character Replacements ISO / IEC 646 国家字符替换 Sample Symbols 示例条码 UPC-A Interleaved 2 of 1234567890 012345678905 EAN-13 9 780330 290951 Code 128 Code 128 Code 39 BC321 Codabar...
  • Page 64 123456-9$ Straight 2 of 5 Industrial 123456...
  • Page 65 Matrix 2 of 5 矩阵 25 码 01234567890 GS1 DataBar (01)00123456789012 PDF417 Car Registration 车辆注册 Data Matrix 数据矩阵 Test Symbol 测试符号 Aztec Code 二 维码 Numbers Package 数字 Label 包装标签 MaxiCode Micro PDF417 Test Message 测试信息 Test Message 测试信息 Postnet Zip Code 美国邮政编码...
  • Page 66 4-CB (4-State Customer Bar Code) 4-CB (4-State Customer 条码) 01,234,567094,987654321,01234567891 ID-tag (UPU 4-State) J18CUSA8E6N062315014880T HF680-ENUS-UG Rev A 7/1/2019...

Table of Contents