Programming The Interface; Introduction 简介 - Honeywell HF680 User Manual

Introduction

This chapter describes how to program your system for the desired interface.

Currently the scanner support three kinds of communication interface, RS232, USB HID and USB Serial.

You can scan the following barcodes to switch the scanner into specific interface.

You should also change the cable after that.

本章主要介绍如何对系统中使用的接口进行编程设置。

目前读码器支持三种通信接口，分别是 RS232、USB HID 和 USB 串行接口。

扫描以下条码即可将读码器切换为相应的接口。

接口设置改动之后，请务必更换相应的连接线。

(1)

RS232

(2)

USB HID

(3)

USB Serial USB 串行接口

接口编程设置

简介

RS232 Interface

RS232 接口

USB HID Interface

USB HID 接口

USB Serial Interface

USB 串行接口

3 – 4