Data Matrix Code Page; Maxicode - Honeywell HF680 Series User Manual
Hand-free area-imaging scanners
Hide thumbs
Also See for HF680 Series:
- User manual (66 pages) ,
- Quick start manual (14 pages) ,
- User manual (51 pages)
Table of Contents
Data Matrix Message Length
Scan the barcodes below to change the message length. Refer to
Description
= 1-3116. Minimum Default = 1, Maximum Default = 3116.
Minimum Message Length
Data Matrix Code Page
Data Matrix Code pages define the mapping of character codes to characters. If the
data received does not display with the proper characters, it may be because the
barcode being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the barcode below,
select the code page with which the barcodes were created (see
Character Replacements
from the
MaxiCode
MaxiCode On/Off
HF680 Series User Guide
(page 68) for additional information. Minimum and Maximum lengths
on page 168), and scan the value and the Save barcode
Programming
Chart. The data characters should then appear properly.
< Default All MaxiCode Settings >
On
Data Matrix Code Page
Message Length
Maximum Message Length
ISO 2022/ISO 646
* Off
111
Hide quick links:
Table of Contents
