Table of Contents
3
Remove the bracket
• Remove the wiring on the switch assembly.
• Remove the fixing screws (2 pcs) for the connecting rod bracket.
• Push the bracket towards the temperature limiter, to remove the
bracket.
4
Remove the switch assembly.
• Remove the fixing screws of the control baseplate.
• Push the control baseplate upward along the body assembly, to
remove the switch assembly.
5
Assembly the switch assembly.
• Conduct assembly after control switch assembly replacement as per the disassembly steps in a reversed way.
Note:
• For wiring, refer to Schematic Diagram on P. 4.
10
Table of Contents
