Table of Contents
9-7.1
9-7.2
9-8
WARNING!
Always ensure all the power supply, drain and fresh water hose are firmly
connected, dry and leak free.
Ensure these parts are not crushed, kinked or twisted.
If the supply cord is damaged, it must be replaced by the service agent (see war-
ranty card) in order to avoid a hazard.
Note: Drum Clean
After each installation or long periods of disuse, before first use and for regular main-
tenance run programme Drum Clean with no load and small amount of detergent in
s
hing agent compartment (2) or with special machine cleaner to remove possibly
u
ptive residues.
9.7 Fresh Water Connection
Make sure that the gaskets are inserted.
1. Connect the water inlet hose with the angled end
to the appliance (Fig. 9-7.1).
Tighten the screw joint by hand
2.
9.8 Electrical Connection
Before each connection check if:
power supply, socket and fusing are appropriate to
the rating plate.
the power socket is earthed and no multi-plug or
extension is used.
the power plug and socket are strictly according.
Put the plug into the socket (Fig. 9-8).
9-Installation
(Fig. 9-7.2).
wa-
corr-
28
Table of Contents
