Related Manuals for Haier HWD80-B14939S8
Summary of Contents for Haier HWD80-B14939S8
- Page 1 User manual Washer-dryer HWD80-B14939S8 HWD90-B14939S8 HWD100-B14939S8 HWD80-B14939 HWD90-B14939 HWD100-B14939...
- Page 2 Thank you Thank you for purchasing a Haier Product. Please read these instructions carefully before using this appliance. The instructions con- tain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance.
-
Page 3: Table Of Contents
Content 1-Safety information ......................... 4 2-Product description ........................8 3-Control panel ..........................9 4-Programmes ..........................12 5-Consumption ..........................13 6-Daily use ............................14 7-Eco friendly washing........................19 8-Care and cleaning ........................20 9-Troubleshooting ...........................23 10-Installation ...........................27 11-Technical data..........................31 12-Customer service ........................32... -
Page 4: 1-Safety Information
1-Safety information Before switching on the appliance for the fi rst time read the follow- ing safety hints!: WARNING! Before fi rst use Make sure there is no transport damage. Make sure all transport bolts are removed. Remove all packaging and keep out of children´s reach. Handle the appliance always with at least two persons because it is heavy. - Page 5 1-Safety information WARNING! Daily use Do not hot wash foam rubber or sponge-like materials. Do not wash any laundry which is polluted with fl our. Do not open detergent drawer during any wash cycle. Do not touch the door during the washing process, it gets hot. Do not open the door if the water level is visibly over the porthole.
- Page 6 1-Safety information WARNING Daily use Do not dry following items in the appliance: Items which are unwashed. Items which have been contaminated with infl ammable substances such as cooking oil, acetone, alcohol, benzine, petrol, kerosene, spot removers, turpentine, waxes, wax removers or other chemicals. The fumes can cause a fi...
- Page 7 1-Safety information WARNING The appliance should be placed in a well-ventilated place. Ensure a location which allows opening the door fully. Never install the appliance outdoors in a damp place, or in an area which may be prone to water leaks such as under or near a sink unit.
-
Page 8: 2-Product Description
2-Product description Note: Deviations Due to technical changes and diff erent models, the illustrations in the following chap- ters may diff er from your model. 2.1 Picture of appliance Rear side (Fig. 2-2): Front (Fig. 2-1): Ref resh Wool Quick 15’ Delicate Fas t Sel f c lean... -
Page 9: 3-Control Panel
3-Control panel Ref resh Wool Quick 15’ Delicate Fast Self clean Ba by Ca re Cotton 20°C Dry level Shi rt Eco 40-60 1 Programme selector 3 Detergent/Softenener 4 Function buttons drawer 2 Display 5 “Start/Pause” button Note: Acoustic signal In following cases, an acoustic signal is no sounds by default: when pressing a button when turning the programme selector... - Page 10 3.5.2 3.5.4 Note: Factory settings To get the best results in each programme Haier has well defi ned specifi c default set- tings. If there is no special requirement default settings are recommended. 3.5.1-Function button “Delay“ Press this button (Fig. 3-7) to start the programme with a delay.
- Page 11 3-Control panel 3.5.3 Function button“Temp.“ Press this button (Fig. 3-9) to change the washing tem- perature of the programme. If no value is illuminated (the display”-- °C“) the water will not be heated. 3.5.4 Function button“Speed“ 3-10 Press this button (Fig. 3-10) to change or deselect the spin of the programme.
-
Page 12: 4-Programmes
4-Programmes Detergent compartment for: Detergent Softener or care product • Yes, Optional, º Max. load Tempera- Preset Function in kg ture spin speed washing in °C drying in kg in kg in rpm select able HWD80/90 Programme range 1 2 Fabrics type HWD100 •... -
Page 13: 5-Consumption
5-Consumption Scan QR code on energy label for energy consumption information. The actual energy consumption may diff er from the declared one according to local conditions. Note: Auto Weight The appliance is equipped with a loading recognition. At low loading, energy, water and washing time will be reduced automatically in some programmes. -
Page 14: 6-Daily Use
6-Daily use 6.1 Power supply Connect the washing machine to a power supply (220V to 240V~/50Hz; Fig. 6-1). Please refer also to section INSTALLATION (see P28). 6.2 Water connection Before connecting check the cleanliness and clar- ity of the water inlet. Tun on the tap (Fig.6-2). - Page 15 6-Daily use 6.3 Care chart Washing Washable up to 95°C Washable up to 60°C Washable up to 60°C normal process normal process mild process Washable up to 40°C Washable up to 40°C Washable up to 40°C normal process mild process very mild process Washable up to 30°C Washable up to 30°C...
- Page 16 6-Daily use 6.5 Selecting detergent Washing effi ciency and performance is determined by used detergent quality. Use only machine wash approved detergent. If needed use specifi c detergents, e.g. for synthetic and woolen fabric. See tips for countertop detergent stickers Do not use dry cleaning agents such as trichloroethylene and similar products.
- Page 17 6-Daily use 6.6 Adding detergent 1. Slide out the detergent drawer. 2. Put the required chemicals into corresponding compartments (Fig. 6-4) 3. Push back the drawer gently. Note: Remove detergent residues before next wash cycle from the detergent drawer. Do not overuse detergent or softener. Please follow the instruction on the detergent package.
- Page 18 6-Daily use 3-14 6.10 Start wash programme Touch “Start/Pause“ button (Fig. 6-8) to start. The LED of the “Start/Pause“ button stops fl ashing and lights up continuously Appliance operates according to present settings. Changes are only possible by cancelling the programme. 6.11 Interrupt / cancel wash programme To interrupt a running programme press gently “Start/Pause“.
-
Page 19: 7-Eco Friendly Washing
7-Eco-friendly washing Environmentally responsible use Washing To achieve best use of energy, water, detergent and time you should use the recom- mended maximum load size. Do not overload (hand width clearance above laundry). For slightly soiled laundry select the Quick 15’ programme. Apply exact dosages of each washing agent. -
Page 20: 8-Care And Cleaning
8-Care and cleaning 8.1 Cleaning the detergent drawer Take always care there are no detergent residues. Clean the drawer regularly (Fig. 8-1): 1. Pull out the drawer until it stops. 2. Press the release button and remove the drawer. 3. Flush the drawer with water until it is clean and insert the drawer back in the appliance. - Page 21 8-Care and cleaning 8.5 Long periods of disuse If the appliance is left idle for a longer period: 1. Pull out the electrical plug (Fig. 8-6). 2. Turn off water supply (Fig. 8-7). 3. Open the door to prevent formation of moisture and odours.
- Page 22 8-Care and cleaning 9. Clean carefully pump fi lter, e.g. using running water 8-14 8-15 (Fig. 8-14). 10. Refi x it thoroughly (Fig. 8-15). 11. Close service fl ap. CAUTION! Pump fi lter sealing has to be clean and unhurt. If the lid is not full tightened, water can escape.
-
Page 23: 9-Troubleshooting
9-Troubleshooting Many occuring problems could be solved by yourself without specifi c expertise. In case of a problem please check all shown possibilities and follow below instructions before you contact an after sales service. See CUSTOMER SERVICE. WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. - Page 24 9-Troubleshooting Problem Cause Solution • Temperature sensor error. • Contact the After sales service. • Heating error. • Contact the After sales service. • Motor error • Contact the After sales service • Dry temperature sensor error. •...
- Page 25 9-Troubleshooting Problem Cause Solution Strong vibration while • Not all transportation bolts have • Remove all transportation bolts. spinning. been removed. • Appliance has no solid position. • Ensure solid ground and a levelled position. • Machine load is not correct. •...
- Page 26 9-Troubleshooting 9.4 In case of power failure The current programme and its setting will be saved. When power supply is restored operation will be re- sumed. If a power failure cuts an operating wash programme door opening is mechanically blocked. To get out any laundry water level should not be seen in the glassy porthole of the door - Danger of burns! Water level has to be lowered as described in “Pump fi...
-
Page 27: 10-Installation
10-Installation 10.1 Preparation Take the appliance out of the packaging. Remove all packaging material including polystyrene base, keep them out of childrens reach. While opening the package, water drops may be seen on plastic bag and port- hole. This normal phenomenon results from water tests in the factory. Note: Packaging disposal Keep all packaging materials out of children´s reach and dispose them in an environ- mentally friendly manner. - Page 28 10-Installtion Note: Keep in safe place Keep the transportation bolts in a safe place for later use. Whenever the appliance is to be moved at fi rst reinstall the bolts. 10.4 Moving the appliance If the machine is to be moved to a distant location, re- place the transportation bolts removed before instal- lation to prevent damage: 10.5 Aligning the appliance...
- Page 29 10-Installation 10.6 Drain Water Connection Fix the water drain hose properly to the piping. The hose has to reach at one point a height between 80 and 100 cm above the appliance bottom line! If possible keep always drain hose fi xed to the clip at the appliance back. WARNING! Use only the supplied hose set for the connection.
- Page 30 10-Installtion 10.7 Fresh Water Connection 10-12 10-11 Make sure that the gaskets are inserted. 1. Connect the water inlet hose with the angled end to the appliance (Fig. 10-11. Tighten the screw joint by hand. 2. The other end connect to a water tap with a 3/4“...
-
Page 31: 11-Technical Data
11-Technical data 11.1 Additional technical data HWD100 HWD90 HWD80 Voltage in V 220-240 V~/50Hz Current in A Max. power in W 2000 Water pressure in MPa 0,03-≤P≤1 Netto weight in kg 11.2 Product dimensions PRODUCT DIMENSIONS HWD 100 HWD 90 HWD80 Overall height of product mm Overall width of product mm... -
Page 32: 12-Customer Service
If you cannot fi nd a solution there, please contact your local dealer or the Service & Support area at www.haier.com where you can fi nd telephone numbers and FAQs and where you can activate the service claim. To contact our Service, ensure that you have the following data available.