Table of Contents
Quick Links
Table of Contents
Related Manuals for Haier HWD80-BP14636
Summary of Contents for Haier HWD80-BP14636
- Page 1 User manual Washer-dryer HWD80-BP14636 HWD80-BP14636S...
- Page 2 Thank You Thank you for purchasing a Haier Product. Please read these instructions carefully before using this appliance. The instructions con- tain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance.
-
Page 3: Table Of Contents
Content 1- Safety information ..........................4 2- Productdescription ........................10 3- Control panel ............................11 4- Programmes ............................15 5- Consumption ...........................16 6- Daily use ............................17 7- Eco-friendly use ..........................22 8- Care and cleaning ...........................23 9- Troubleshooting ..........................25 10- Installation ............................29... -
Page 4: 1- Safety Information
1- Safety information ing safety hints: Trade mark Haier HWD80-BP14636 HWD80-BP14636S Maximum spin speed for standard 60°C cotton washing cycle in rpm 1400 Washing capacity for standard 60°C cotton washing cycle (without drying) in kg Drying capacity for standard “dry cotton” drying cycle... - Page 5 1- Safety information WARNING! This appliance is intended to be used in household and similar applications such as: – staff kitchen areas in shops, offices and other working environments; – farm houses; – by clients in hotels, motels and other residential type environments; –...
- Page 6 1- Safety information WARNING! Before first use ▶ Make sure there is no transport damage. ▶ Make sure all transport bolts are removed. ▶ Remove all packaging and keep out of children´s reach. ▶ Handle the appliance always with at least two persons because it is heavy.
- Page 7 1- Safety information WARNING! Daily use ▶ Do not remove or insert the plug in the presence of flammable ▶ Do not hot wash foam rubber or sponge-like materials. ▶ Do not wash any laundry which is polluted with flour. ▶...
- Page 8 1- Safety information WARNING! Daily use ▶ Do not dry following items in the appliance: ▶ Items which are unwashed. ▶ Items which have been contaminated with inflammable sub- stances such as cooking oil, acetone, alcohol, benzine, petrol, kerosene, spot removers, turpentine, waxes, wax removers or other chemicals.
- Page 9 1- Safety information Installation ▶ Ensure a location which allows opening the door fully. Do not in- stall the tumble dryer behind a lockable door, a sliding door or a door with hinges on the opposite side of the tumble dryer door as this limits the full opening of the tumble dryer door.
-
Page 10: 2- Productdescription
2- Product description Note: 2.1 Picture of appliance Front (Fig. 2-1): Rear side (Fig. 2-2): HW80-BP14636 HW70-BP14636 BLDC motor 1000 HWD80-BP14636 Temp. Speed Intense Extra rinse Delay Start/Pause Temp. Speed Intense Extra rinse Delay Start/Pause Self Clean 1400 Energy Capacity... -
Page 11: 3- Control Panel
3- Control panel E c o HWD80-BP14636 Temp. Speed Intense 5+5kg Delay Start/Pause 1400 8 /5kg Spin speed capacity Speed up 1 “On/Off“ button 5 Function buttons 2 Programme selector 6 “Delay” button 3 Display 7 “Start/Pause“ button 4 Detergent /Softener drawer... - Page 12 LED lights or -in case of only one option- the LED switches off. Note: Factory settings To get best results in each programme Haier has well defined specific default settings. If there is no special requirement default settings are recommended.
- Page 13 3- Control panel 3-5.1 3-5.2 3.5.1-Function button“Temp.“ Press this button (Fig. 3-5.1) to change the washing temperature of the programme. If no value is illumi- nated the temperature will be 0 °C. In conjunction with the “Intense” button, the child lock function can be switch on/off (see CHILD LOCK).
- Page 14 3- Control panel 3.6- “Delay” button Press this button (Fig. 3-6) to start the programme with a delay. End time delay could be increased in steps of 30 minutes from 0.5-24h. For example display off 6:30 means end of programme cycle will be in 6 hours and 30 minutes.
-
Page 15: 4- Programmes
4- Programmes Detergent compartment for: Water inlet only, no detergent Detergent Softener or care product • Yes, Optional, º Max. load Temperature Preset Function spin washing drying speed in kg in kg in °C in rpm seletable Programme range 1 Fibre type •... -
Page 16: 5- Consumption
5- Consumption Parameter Programme Cotton Temperature 60°C 60°C 60°C in °C Washing Max. load in kg Drying 0.84 0.85 0.86 Washing Energy in kWh Drying 3.47 3.46 3.48 50.8 50.3 51.3 Washing Water in L Drying 39.7 38.4 36.6 Time Washing and 6:09 6:09... -
Page 17: 6- Daily Use
6- Daily use 6.1 Power supply Connect the washing machine to a power supply (220V to 240V~/50Hz; Fig. 6-1). Please refer also to section INSTALLATION. 6.2. Water connection ▶ Before connecting check the cleanliness and clar- ity of the water inlet. ▶... - Page 18 6- Daily use Care chart Washing Washable up to 95°C Washable up to 60°C Washable up to 60°C normal process normal process mild process Washable up to 40°C Washable up to 40°C Washable up to 40°C normal process mild process very mild process Washable up to 30°C Washable up to 30°C...
- Page 19 6- Daily use 6.5 Selecting detergent ▶ Washing efficiency and performance is determined by used detergent quality. ▶ Use only machine wash approved detergent. ▶ If needed use specific detergents, e.g. for synthetic and woolen fabric. ▶ Mind always detergent manufacturer recommendations. ▶...
- Page 20 6- Daily use 6.6 Adding detergent 1. Slide out the detergent drawer. 2. Put the required chemicals into corresponding compartments. (Fig. 6-6). 3. Push back the drawer gently. Note: ▶ Remove detergent residues before next wash cycle from the detergent drawer. ▶...
- Page 21 6- Daily use 6-10 6.10 Start wash programme Start/Pause Press “Start/Pause“ button (Fig. 6-10) to start. Appli- ance operates according to present settings. Changes are only possible by cancelling the programme. Note: Door lock ▶ For safety reasons the door is locked partially during the washing /drying cycle. It is only possible to open the door at the end of the programme or after the programme was cancelled correctly (see description above).
-
Page 22: 7-Eco-Friendly Use
7-Eco-friendly use Environmentally responsible use Washing To achieve best use of energy, water, detergent and time you should use the recom- mended maximum load size. Do not overload (hand width clearance above laundry). For slightly soiled laundry select the Quick Wash programme. Apply exact dosages of each washing agent. -
Page 23: 8- Care And Cleaning
8- Care and cleaning 8-3.2 8-3.1 To prevent blockage of water supply by solid substanc- supply. Unscrew the water inlet hose at the back (Fig. 8-3.1) of the appliance as well as on the tap (Fig. 8-3.2). 8.4 Cleaning the drum Remove accidentally washed metal parts such as pins, coins, etc. - Page 24 8- Care and cleaning 8-5.1 8-6.2 for instanvce if the appliance: doesn´t drain the water. doesn´t spin. cause unusual noise while running. WARNING! 8-6.3 8-6.4 hot! Before any action please ensure water has cooled down. 2. Open service flap. You can either use a coin or a screwdriver (Fig.
-
Page 25: 9- Troubleshooting
9- Troubleshooting 9- Troubleshooting of a problem please check all shown possibilities and follow below instructions before you contact an after sales service. See CUSTOMER SERVICE. WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. improper repairs can cause considerable consequential damages.. - Page 26 9- Troubleshooting 9- Tr Problem Cause Solution • Motor - error.. • Contact the After sales service.. • Water protective level - error.. • Contact the After sales service. • Water level sensor - error • Contact the After sales service. •...
- Page 27 9- Troubleshooting Problem Cause Solution Excessive foam floats • Detergent is not a appropriate • Check detergent recommen- drum and/or deter- dations. gent drawer. • Excessive use of detergent. • Reduce amount of detergent. Automatic adjustment • Washing programme duration will be •...
- Page 28 10- Installation 10.1 Preparation Take the appliance out of the packaging. Remove all packaging material including polystyrene base, keep them out of childrens reach. While opening the package, water drops may be seen on plastic bag and port- hole. This normal phenomenon results from water tests in the factory. Note: Packaging disposal Keep all packaging materials out of children´s reach and dispose them in an environmen- tally friendly manner.
-
Page 29: 10- Installation
10- Installation 10- Installation 10.4 Moving the appliance If the machine is to be moved to a distant location, replace the transportation bolts re- moved before installation to prevent damage: 1. Remove the blanking plugs. 2. Remove the back cover 3. - Page 30 10- Installation Following connections are possible: 10-6.2 10-6.1 10.6.1 Drain hose to sink Hang the drain hose with the U-support over the edge of a sink with adequate size (Fig. 10-6.1). ping. 10.6.2 Drain hose to waste water connection The internal diameter of the stand pipe with vent-hole must be minimum 40 mm.
- Page 31 10- Installation 10- Installation 10.8 Electrical Connection 10-8 Before each connection check if: power supply, socket and fusing are appropriate to the rating plate. the power socket is earthed and no multi-plug or extension are used. the power plug and socket are strictly according. The UK plug meets BS1363A standard.
- Page 32 Importer: HAIER ELECTRONICS MIDDLE EAST FZE Address: Office No:LB190602 P.O. Box: 261958, Jebel Ali Free Zone, Dubai, UAE...
- Page 61 1>P>0.03...
- Page 64 0020506943JN...