Specifications; Quick Start Guide With Device; Care And Maintenance - Electrolux EOH/M-5105N EEC User Manual

Oil-filled radiator
Table of Contents
Available languages
  • EN

Available languages

  • ENGLISH, page 1

Specifications

Parameter/Model
Number of the sections
Heating power, W
Power supply, V ~ Hz
Current strength, A
Electrical protection class
Dust and moisture protection
class, IP
Heating area, m
*
2
Device dimensions
(W×H×D), mm
Package dimensions
(W×H×D), mm
Net weight, kg
Gross weight, kg
* Indicated is a guideline value and may differ depending on actual conditions of use.
The manufacturer reserves the right to make the changes
electrical network.
Quick start guide
with device
Installing the appliance
The device is installed on legs for free
movement.
The set of legs is fixed as follows:
Turn the heater upside down (Fig. 3);
Pass the support leg bar through the
retainer;
Secure the other end of the strip with a nut.
Switching on/selecting the operating power
of the heater
To turn the device on, turn the lower knob
to the right, select the desired power of the
device - by pressing buttons I, II and III.
Setting the temperature
When the room temperature reaches
a comfortable level, slowly turn the
thermostat knob to the left until it clicks.
The device will remember the comfortable
temperature and will maintain it
automatically.
EOH/M-
5105N EEC
5
1000/600/400
4.35
up to 15
250×625×250
295×655×150
5.9
6.6
Fig. 3
EOH/M-
EOH/M-
5157N EEC
5209N EEC
7
1500/900/600
2000/1200/800
220-240~50-60
6.52
I
IP20
up to 20
up to 25
250×625×330
250×625×405
370×655×150
435×655×150
7.4
8.2
Shutdown
To turn off the heater, return the «I» and «II»
keys to their original position.
Overheating protection function
The heater switches off automatically in
case of overheating.
Roll-over protection function
The device is equipped with an automatic
switch, which is activated if the device
deviates from the working position. The
heater switches off automatically.

Care and maintenance

The oil heater does not require any special
maintenance.
Before servicing (leaving) the heater must be
disconnected from the power supply.
The body of the device should be cleaned
from time to time with a soft cloth or damp
sponge. Never use abrasive, foaming
detergents or solvents.
ENGLISH
EOH/M-
5221N EEC
9
11
2200/1200/1000
8.7
9.57
up to 27
250×625×480
505×655×150
9.1
10.8
10
11.8
7
Table of Contents
loading

This manual is also suitable for:

Eoh/m-5157n eecEoh/m-5209n eecEoh/m-5221n eec

Table of Contents