Daikin Altherma 3 R W Installer's Reference Manual page 231

Hide thumbs Also See for Altherma 3 R W:
Table of Contents
ERGA04~08EA + EHBH/X04+08EF
Daikin Altherma 3 R W
4P629085-1B – 2021.11
a
WLAN cartridge
WLAN module
b
Router
c
Smartphone + app
Configuration
To configure the Daikin Residential Controller app, follow the in-app instructions.
While doing this, the following actions and information are needed on the user
interface:
Mode: Turn AP mode ON (= WLAN cartridge/module active as access point) or OFF.
#
Code
[D.1]
N/A
Reboot: Reboot the WLAN cartridge/module.
#
Code
[D.2]
N/A
WPS: Connect the WLAN cartridge/module to the router.
#
Code
[D.3]
N/A
INFORMATION
You can only use this function if it is supported by the software version of the WLAN,
and the software version of the Daikin Residential Controller app.
Remove from cloud: Remove the WLAN cartridge/module from the cloud.
The WLAN cartridge needs to be inserted in the
user interface. See the installation manual of the
WLAN cartridge.
The WLAN module needs to be installed by the
installer on the indoor unit (on the inside of the
front panel). See:
Installation manual of the WLAN module
Addendum book for optional equipment
Field supply.
The Daikin Residential Controller app needs to be
installed on the user's smartphone. See:
http://www.onlinecontroller.daikineurope.com/
Description
Enable AP mode:
No
Yes
Description
Reboot the gateway:
Back
OK
Description
WPS:
No
Yes
10
Configuration
|
Installer reference guide
231

Hide quick links:

Table of Contents
loading

Table of Contents