Table of Contents
8/24
PSM | Safety instructions
Bosch Rexroth AG, RE 95190-B/2021-08-12
The product is intended only for professional use and not for private use.
Intended use includes having fully read and understood this documentation,
especially chapter 2 "Safety instructions" on page 7.
2�3 Improper use
Any use other than that described as intended use is considered improper.
Bosch Rexroth AG is not liable for damage resulting from improper use. The user is
solely responsible for any risks arising from improper use.
The following foreseeable forms of faulty usage are also considered improper
(this list is not exhaustive):
• Use outside the operating parameters approved in the data sheet
(unless customer-specific approval has been granted)
• Use of non-approved fluids, e.g. water or hydraulic fluids containing water
• Use of the sensor under water
• Application of the sensor in explosive environments
• Use of the sensor in a corrosive atmosphere
2�4 Personnel qualifications
The activities described in this documentation require basic mechanical,
electronical/electrical and hydraulic knowledge, as well as knowledge of the
associated technical terms. In order to ensure safe use, these activities should only
be performed by skilled personnel or an instructed person under the direction and
supervision of skilled personnel.
Skilled personnel refers to persons who possess the professional training,
knowledge and experience, as well as the understanding of the regulations
relevant to the work to be done that are necessary to recognize possible dangers
and take the appropriate safety measures. Skilled personnel must follow the rules
relevant to their field and have the necessary expert knowledge of mechatronics,
electronics and hydraulics, if applicable.
Expert knowledge means, for instance:
• Being able to read and fully understand electrical circuit diagrams and hydraulic
diagrams, if applicable,
• in particular, fully understanding the relationships with regard to safety devices,
• as well as to carry out the wiring of electronic components correctly and
• to have knowledge of the function and interaction of electronic, mechanical and
hydraulic components.
System developments, installations and commissioning of electronic systems for
controlling hydraulic drives must only be carried out by trained and experienced
specialists who are sufficiently familiar with both the components used and the
complete system.
Bosch Rexroth offers you measures supporting training in specific areas.
You can find an overview of the training contents on the Internet at:
www.boschrexroth.com/training.
Table of Contents
