Table of Contents
4.5.1 About domestic hot water control
4.5.2 Instant DHW (no tank installed)
Using the instant DHW home page
To adjust the instant DHW temperature
4.5.3 Tank
CHYHBH05+08AF + EHYKOMB33AA
Daikin Altherma R Hybrid
4P471762-1B – 2020.10
Your system layout may or may not contain a domestic hot water tank. When no
tank is installed, the boiler provides domestic hot water instantly. When, on the
contrary, a tank is installed, domestic hot water control is different depending on
the DHW tank mode set by the installer:
▪
Reheat mode
▪
Scheduled mode
▪
Scheduled + reheat mode
Not applicable for Switzerland
When there is a demand for hot water tapping, the boiler provides DHW instantly.
Not applicable for Switzerland
Depending on the user profile, the user interface gives you either a basic or a
detailed home page.
User profile = Basic
44°C
Desired temperature
1 Go to the instant DHW home page.
2 Press
or
to adjust the instant DHW temperature (DHW).
The instant DHW set point temperature may NOT be below 40°C.
The following modes are only applicable if a tank is installed and are set by the
installer.
To determine which DHW tank mode you are using (method 1)
Check the installer settings table filled in by the installer.
To determine which DHW tank mode you are using (method 2)
Prerequisite: User profile = Detailed.
1 Go to the DHW tank temperature home page (Tank).
2 Check which icons are displayed:
If... is displayed
User profile = Detailed
Tue
01:03
44°C
DHW
Desired temperature
Then the DHW tank mode =...
Reheat mode
Scheduled mode
Scheduled + reheat mode
4
Operation
|
Tue
01:03
DHW
User reference guide
23
Table of Contents
