Assistant Initialization; Figure 18: First Boot Assistant Screen Displayed On Installation - Safran MorphoAccess SIGMA Series Administration Manual
Hide thumbs
Also See for MorphoAccess SIGMA Series:
- Quick user manual (33 pages) ,
- Administration manual (517 pages) ,
- Installation manual (81 pages)
Table of Contents
MorphoAccess® SIGMA Series – Administration Guide
First Boot Assistant
Assistant Initialization
First Boot Assistant (FBA) is launched as soon as the MorphoAccess® SIGMA Series terminal is
started for the first time. All the fundamental settings can be done from an FBA screen itself.
FBA can also set to launch on terminal reboot.
An administrator can access First Boot Assistant from Management menu, as give in access
path.
Access Path
System Menu > First Boot Assistant
Pre-requisites
Verify that the battery is plugged in the terminal beforehand. Battery backup is
necessary for preventing data loss on power cut/power loss instance
If terminal is unpowered for a too long time, it will be necessary to change the battery
Screens & Steps
Figure 18: First Boot Assistant Screen displayed on Installation
1. On first time installation, by default First Boot Assistant will open. An administrator
can also access FBA settings from Access path mentioned above.
2. In First Boot Assistant Screen, an administrator can configure basic parameters as
mentioned in below:
2014_0000002196-09
May 2016
– R
M
D
ORPHO
OCUMENT
EPRODUCTION AND
D
F
ISCLOSURE
ORBIDDEN
72
Table of Contents
