Access Control Process For Vip Users - Safran MorphoAccess SIGMA Series Administration Manual
Hide thumbs
Also See for MorphoAccess SIGMA Series:
- Quick user manual (33 pages) ,
- Administration manual (517 pages) ,
- Installation manual (81 pages)
Table of Contents
MorphoAccess® SIGMA Series – Administration Guide
Access Control
Access Control Process for VIP Users
If the user is listed as VIP, then access control flow will differ from the general access control
flows. When a user is enrolled as VIP and the VIP bypass is enabled, then the VIP listed user is
exempted from authentication using biometric data, PIN, or BIOPIN.
The Access Control Process for VIP listed users has following steps:
1. A user can initiate access request by placing card or finger
2. One identified as VIP listed user terminal will not ask for any biometric data
3. Other checks such as such as face capture (if configured), access schedule, holiday
schedule, banned card, authorized list, expiry date, trigger event check, etc. are done
as per the authentication process, refer from Step 5 in Access Control Flow Diagram
in Authentication Mode
4. On successful authentication, access is granted to VIP listed user
Note: If the access request is triggered from keyboard or external source like Wiegand string,
then the user authentication process will be conducted using biometric/PIN check.
Configuration Key
Parameter Name
ucc.allow_vip_auth_
bypass
2014_0000002196-09
May 2016
Parameter Value
0 or 1
– R
M
D
ORPHO
OCUMENT
Description
Using this parameter an administrator can enable
or disable VIP user authentication bypass for
threat level 0.
If this parameter is set to "0", VIP user
authentication bypass is not allowed. Users have
to input fingerprint and access is granted only on
successful authentication.
If this parameter is set to "1", VIP user
authentication bypass is allowed. A VIP user is
granted access without authentication checks.
D
EPRODUCTION AND
ISCLOSURE
F
362
ORBIDDEN
Table of Contents
