MorphoAccess® SIGMA Series – Administration Guide
Compatibility with an Access Control System
Activation key
A specific configuration key enables this feature.
Parameter name
gpio.sdac_rte_mode
Configuration key
Parameter name
gpio.sdac_rte_egress_timeout
2014_0000002196-09
May 2016
Value
Using this parameter, an administrator can set
0, 1 or 2
an exit mode in SDAC. Following parameter
values can be configured:
Value
1 to 300
Using this parameter, an administrator can
define an egress time, the duration for which
Seconds
door will be opened on exit and on timeout
door is closed automatically.
– R
M
D
ORPHO
OCUMENT
EPRODUCTION AND
Description
Parameter value "0" means None
Parameter value "1" means Push
Button. Push button exit mode is
selected when a push button is located
at exit gate and users are allowed push
the exit button to open the exit door.
Description
D
F
ISCLOSURE
ORBIDDEN
431