Configuring A Networked Morphoaccess; Introduction; Figure 12: Configuration Of A Morphoaccess® Sigma Series Terminal By A Host System - Safran MorphoAccess SIGMA Series Administration Manual
Hide thumbs
Also See for MorphoAccess SIGMA Series:
- Quick user manual (33 pages) ,
- Administration manual (517 pages) ,
- Installation manual (81 pages)
Table of Contents
MorphoAccess® SIGMA Series – Administration Guide
Terminal Configuration and Administration
Configuring a Networked MorphoAccess®
Introduction
A MorphoAccess® SIGMA Series terminal can be managed by a PC connected to the
terminal, using an application such as a web browser connected to the embedded
Webserver or Morpho Bio Toolbox (in case terminal is in legacy Morpho mode).
The remote operations available are mainly:
Time and Attendance configuration,
read the value of parameters,
modify the value of parameters,
create access schedules,
network configuration,
Tamper settings, etc.
The terminal works as a TCP/IP server, which waits for a request from the Host System
application, which acts as a TCP/IP client.
Figure 12: Configuration of a MorphoAccess® SIGMA Series terminal by a Host System
The commands supported by the MorphoAccess® SIGMA Series terminal are described in
the MorphoAccess® SIGMA Series Host System Interface Specification document.
Refer to "Terminal Configuration through Webserver" section in this document, for details
on actions that can be performed from Web Server.
2014_0000002196-09
May 2016
– R
M
D
ORPHO
OCUMENT
EPRODUCTION AND
D
F
ISCLOSURE
ORBIDDEN
54
Table of Contents
