MULTI/SINGLE
8. Installation
Fixing Installation Plate
•
The wall you select should be strong and solid enough to prevent vibration.
1. Mount the installation plate on the wall with type "A" screws which are provided with product. (Refer to the
Installation manual.) If mounting the unit on a concrete wall, use anchor bolts.
•
Mount the installation plate horizontally by aligning the centerline using Horizontal meter.
2. Measure the wall and mark the centerline. It is also important to use caution concerning the location of the
installation plate. Routing of the wiring to power outlets is through the walls typically. Drilling the hole through
the wall for piping connections must be done safely.
Installation Plate
Chassis
Hook
* According to product type, model line up, sales region..etc, applicability of each chassis could be different.
Chassis
Hook
* According to product type, model line up, sales region..etc, applicability of each chassis could be different.
The lower left and the right side piping of Installation Plate
Unit Outline
C Type : 418
Ø65
Installation Plate
C Type : 98
152
* According to product type, model line up, sales region..etc, applicability of each chassis could be different.
32
Indoor unit
SJ Chassis
Type "A" Screws
SV Chassis
Installation Plate
Type "A" screw
SJ chassis
Place a level on raised tab
C Type : 418
Ø65
C Type
C Type : 134
194
(Unit : mm)
SK Chassis
SK chassis
Place a level on raised tab
Unit Outline
C Type: 494
C Type: 504
Ø65
Measuring Tape
83
C Type: 134
Measuring Tape
Hanger
Wall Mounted Unit (2)
[Unit : mm (inch)]
Ø65
83
C Type: 150
(Unit : mm)