MULTI/SINGLE
Indoor unit
8. Installation
• Please read the instruction sheets completely before installing the product.
• When the power cord is damaged, replacement work shall be performed by authorized personnel only.
• Installation work must be performed in accordance with the national wiring standards.
• Teach the customer the operation and maintenance procedures, using the operation manual. (air filter cleaning,
temperature control, etc.)
8.1 Selection of the best location
•
The place where room air circulation is good.
•
Do not install the unit near the door.
•
There should not be any obstacles to the air circulation or installation. Ensure the spaces from the wall, ceiling,
or other obstacles.
•
The place where the indoor unit can be connected with outdoor unit easily.
•
The place where the unit is leveled.
•
The place shall allow easy water drainage.
•
The place where bear a load exceeding four times of the indoor unit weight.
•
The mounting ceiling or wall should be solid enough to protect it from the vibration.
•
The place where the unit is not affected by an electrical noise.
•
The place where noise prevention is taken into consideration.
•
The place where the maintenance space for product is sufficient.
•
There should not be any heat source or steam near the unit.
More than 100 (3-15/16)
[Unit : mm(inch)]
More than 200 (7-7/8)
More than 100 (3-15/16)
Wall Mounted Unit
40