MULTI/SINGLE
Indoor unit
8. Installation
8.2.2 Preparing work for Installation
Open side cover
1) Remove two screws from Left and Right side-cover.
2) Unlock side-cover from side panel by slightly pulling the edge of side cover.
Tap the side-cover with your palm on the backside.
3) Remove bracket from side-panel and paper bracket from side-cover.
4) Knock out the pipe hole from the left side cover with nipper/plier.
5) Remove the rubber stopple in the desired drain direction.
Important
•
It is recommended to select the left side for drain to have common hole in the side-cover along with pipe and
wiring.
•
Knock hole on right side-cover only if right side is selected for water drain.
CAUTION
•
Hold the side-cover with other hand while tapping to prevent it to fall down.
Ceiling Suspended Unit
Right side cover
Backside
Backside
Left side
cover
22