Table of Contents
4-2
Identification
4.2
Type Plates
Each drive component is marked by a type designation.
There is a type plate attached to all devices.
A label (cable mark) is wrapped around ready-made cables. This label
indicates the type designation and the length. (The designation of the
cable itself - without connector - is printed on the cable sheath.)
The identification of accessories packed in bags is either printed on the
bag or indicated in an accompanying note.
Type Plate Arrangement
1: Power section type plate
2: Control section type plate
Fig. 4-2: Type plate arrangement
Rexroth IndraDrive C HCS03.1
1
2
DOK-INDRV*-HCS03.1****-PR02-EN-P
Hide quick links:
Table of Contents
