Configuring The Adapter For App Control; Configuring The Adapter For The Smart Grid Application; Updating Software - Daikin Altherma 3 GEO Series Installer's Reference Manual
Hide thumbs
Also See for Altherma 3 GEO Series:
- Installer's reference manual (116 pages) ,
- Installation manual (40 pages) ,
- User reference manual (36 pages)
Table of Contents
9.4.2 Configuring the adapter for app control
9.4.3 Configuring the adapter for the Smart Grid application
9.4.4 Updating software
To update adapter software
EGSAH/X06+10UDA9W
Daikin Altherma 3 GEO
4P598592-1A – 2019.12
When the LAN adapter is used for app control (only), there is hardly any
configuration required. After correct installation and system start-up, all system
components (LAN adapter, router, and Daikin Residential Controller app) should be
able to find each other automatically by way of their IP address.
If the system components fail to connect to each other automatically, you can
connect them to each other manually by making use of a fixed IP address. In this
case, provide LAN adapter, router, and Daikin Residential Controller app with the
same fixed IP address. For how to provide the LAN adapter with a fixed IP address,
see
"9.4.8 Network
settings" [
When the LAN adapter is used for the Smart Grid application, configure the LAN
adapter on the dedicated configuration web interface.
▪
For instructions on how to access the configuration web interface, see
"9.4.5 Configuration web
▪
For an overview of Smart Grid settings, see
▪
For more information on the Smart Grid application, see
4
application" [
120].
If required, perform a software update. For instructions, see
4
software" [
113].
INFORMATION
For a good understanding of the Smart Grid application, and to be able to properly
configure the LAN adapter, it is recommended to first read up on the Smart Grid
application in
"9.5 Smart Grid
To update LAN adapter software, use the Daikin Residential Controller app.
INFORMATION
▪
To update LAN adapter software with the Daikin Residential Controller app, you
need a router. In case the LAN adapter is only used for the Smart Grid application
(and a router is not part of the system), temporarily add a router to the setup
according to
▪
The Daikin Residential Controller app will automatically check the LAN adapter
software version and ask for an update, if required.
INFORMATION
For the indoor unit and user interface to function with the LAN adapter, it is required
that their software meets requirements. ALWAYS make sure the unit and user
interface have the latest software version. For more information, see
my.daikin.eu/denv/en_US/home/applications/software-finder/service-software/unit-
software/heating/MMI-software-daikin-altherma-LT.html.
Prerequisite: A router is (temporarily) part of the layout, you have a smartphone
with the Daikin Residential Controller app, and the app notified you that new LAN
adapter software is available.
4
118].
4
interface" [
114].
"9.5.1 Smart Grid
4
application" [
120].
"App control + Smart Grid
application" [
9
LAN adapter
|
4
settings" [
121].
"9.5 Smart Grid
"9.4.4 Updating
4
102].
https://
Installer reference guide
113
Table of Contents
Troubleshooting
