Starting Up The System; Configuration - Lan Adapter; Overview: Configuration - Daikin Altherma 3 GEO Series Installer's Reference Manual
Hide thumbs
Also See for Altherma 3 GEO Series:
- Installer's reference manual (116 pages) ,
- Installation manual (40 pages) ,
- User reference manual (36 pages)
Table of Contents
9
|
LAN adapter
9.3 Starting up the system
9.4 Configuration – LAN adapter
9.4.1 Overview: Configuration
Installer reference guide
112
NOTICE
Make sure a fast acting fuse or circuit breaker is present in the setup (or as part of
the wall socket, or install an external one (rated current 100 mA~6 A, type B)).
The LAN adapter gets its power from the indoor unit. After powering on the
system, it can take up to 30 minutes before the LAN adapter is operational,
depending on the system layout.
LAN adapter configuration depends on the LAN adapter application/system layout.
If
The LAN adapter is used for app control See
The LAN adapter is used for the Smart
Grid application
Additionally, this chapter contains instructions for how to:
Topic
Update software
Access the configuration web interface
Consult system information
Perform a factory reset
Configure network settings
INFORMATION
If 2 LAN adapters are present in the same LAN network, configure them separately.
X1A
1
2
3
4
N
L
Then
"9.4.2 Configuring the adapter for
4
app
control" [
113].
See
"9.4.3 Configuring the adapter for
the Smart Grid
application" [
Chapter
"9.4.4 Updating
software" [
"9.4.5 Configuration web
4
interface" [
114]
"9.4.6 System
information" [
4
"9.4.7 Factory
reset" [
"9.4.8 Network
settings" [
4
113].
4
113]
4
115]
116]
4
118]
EGSAH/X06+10UDA9W
Daikin Altherma 3 GEO
4P598592-1A – 2019.12
Table of Contents
Troubleshooting
