Table of Contents
7-2
Electrical Installation
7.2
Interference Elimination and EMC
Interference Elimination
Interference emission
Note:
The subject interference elimination and electromagnetic
compatibility (EMC) is described in detail in a separate
documentation. It is absolutely necessary to read this
documentation for the proper operation of AC-drives!
The document is titled "Electromagnetic compatibility (EMC) in
drive and control systems". Doc-Type: DOK-GENERAL-
EMV********-PRxx-EN-P. The item number is 259814.
Note:
As the HMV01.1R power supply unit must be operated
together with a combining filter, the indications concerning the
mains filter arrangement apply above all to the HMV01.1E.
(The line filter is already included in the combining filter).
To maintain class B limit values (interference suppression N) as per
EN 55011 / 3.91 at the machine (required in residential and light industrial
areas), suitable interference suppression filters must be installed in the
mains supply line in the machine. The motor power cable should be
routed in a shielded manner or a shielded motor power cable should be
used.
Risk of damage!
⇒ Only use Rexroth filters. These filters have been
adjusted to the Rexroth supply units, inverters and
motors in the best possible way. If you use different
CAUTION
filters, the limit values possibly cannot be complied with.
Moreover the filters and other components of the drive
system might be destroyed.
Rexroth IndraDrive
DOK-INDRV*-HMV-*******-PR01-EN-P
Hide quick links:
Table of Contents
