Replacing The Riser Card; Preliminary Steps; Removing The Defective Riser Card - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual
Hide thumbs
Also See for PRIMERGY TX1330 M4:
- Operating manual (110 pages) ,
- Customer service information bulletin (3 pages) ,
- Upgrade and maintenance manual (565 pages)
Table of Contents
Expansion cards and backup units
Ê If applicable, restore LAN teaming configurations, see section
replacing/upgrading LAN controllers" on page
9.4.4
Replacing the riser card
Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
9.4.4.1
Preliminary steps
"Locating the defective server" on page 51
Ê
"Suspending BitLocker functionality" on page 97
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
Ê Remove all external cables from the expansion card installed in the riser
card slot.
"Getting access to the component" on page 55
Ê
Ê Remove the system fan module, see section
module" on page 81
Ê If applicable, remove the SAS expander holder without disconnecting
cables, see section
Position the SAS expander holder on the HDD cages to get more space.
9.4.4.2
Removing the defective riser card
Ê Remove the expansion card from the riser card slot, see section
an expansion card" on page
290
"Removing the SAS expander holder" on page
286.
Upgrade and Maintenance Manual
122.
Hardware: 5 minutes
"Removing the system fan
"After
256.
"Removing
TX1330 M4
Chapters
Table of Contents
