Related Manuals for Sony BVE-700
Summary of Contents for Sony BVE-700
- Page 1 EDITING CONTROL UNIT BVE-700 INSTALLATION MANUAL 1st Edition Serial No. 10001 and Higher...
- Page 2 4. Prevention against achieving hazardous condition due to uneven mechanical loading When this product is installed in a rack, please make sure that the rack does not achieve hazardous condition due to uneven mechanical loading. BVE-700...
-
Page 3: Table Of Contents
Matching Connectors and Cables ............1-4 (E) 1-5. Input/Output Signals of Connectors ............1-5 (E) 1-6. Switch Settings on Boards and LED Description ......... 1-8 (E) 1-7. Rack Mounting ..................1-11 (E) 1-8. Installing the BKE-701 ............... 1-12 (E) 1 (E) BVE-700... -
Page 4: Manual Structure
Manual Structure Purpose of this manual This manual is the installation manual of Editing Control Unit BVE-700. This manual is intended for use by trained system and service engineers, and describes the information on installing the BVE-700. Related manuals Beside this Installation Manual, the following manuals are available for the unit. -
Page 5: Installation
. Areas where is subjected to static electricity noise. Required Parts for Europe Ventilation The inside of the BVE-700 is cooled by a fan (rear and 1 Power cord : !1-782-929-21 sides). The power supply can be damaged if the exhaust vent (rear... -
Page 6: Installation Space
1-3. Installation Space 1-3. Installation Space Processor unit 132.4 17.5 Unit : mm 1-2 (E) BVE-700... - Page 7 1-3. Installation Space Control panel unit Unit : mm 1-3 (E) BVE-700...
-
Page 8: Matching Connectors And Cables
1-4. Matching Connectors and Cables Use the following connectors, cables, or equivalents when connecting cables to the unit. Panel indication Connector name Matching connector and cable Name Sony part No. Processor unit PLAYER-1 D-sub 9-pin, Female D-sub 9-pin, Male PLAYER-2... -
Page 9: Input/Output Signals Of Connectors
No Connection EDL : RS-232C (D-sub 9-pin, Male) _ EXT VIEW _ Pin No. Signal Function No Connection Received data Transmitted data No Connection Ground No Connection (Not used at present) (Not used at present) No Connection 1-5 (E) BVE-700... - Page 10 12 V Panel Power Supply 12 V Panel Power Supply Received data (_) Ground Transmitted data (+) 12 V Panel Power Supply Ground No Connection Ground 12 V Panel Power Supply 12 V Panel Power Supply Ground 1-6 (E) BVE-700...
- Page 11 12 V Panel Power Supply 12 V Panel Power Supply Transmitted data (_) Ground Received data (+) 12 V Panel Power Supply Ground No Connection Ground 12 V Panel Power Supply 12 V Panel Power Supply Ground 1-7 (E) BVE-700...
-
Page 12: Switch Settings On Boards And Led Description
Lights up during reference signal input. Lights up D105 (A-2) Green PLL OK Lights up when the internal PLL circuit is locked to Lights up reference signal input (during HD only). Lights up dim when PLL is not locked (during HD only). 1-8 (E) BVE-700... - Page 13 Any switch setup other than the those shown on the above table is invalid. S2-6 : Factory use S2-7 : Setup status OPEN : Normal operation CLOSE : The machine starts up with the setup of USER SETUP DATA1 state. 1-9 (E) BVE-700...
- Page 14 1 2 3 4 5 6 7 8 CLOSE : Initializing Factory setting indicates the knob position.) (K-5) ABORT switch Factory use (K-5) Reset switch Resets the BVE-700 and initializes it. (E-5) Rotary switch Factory use Factory setting LEDs Ref. No. Address Color Name...
-
Page 15: Rack Mounting
The BVE-700 is mounted in the 19-inch standard rack. the RMM-10 rack mount kit. To mount the BVE-700 in the rack, use the specified rack mount kit and follow the procedure described below. Tighten the screws to the following torque. -
Page 16: Installing The Bke-701
Rack tool Rack tool Rail Rail B5 x 12 9. Attach the front panel to the equipment. 1-8. Installing the BKE-701 For the installation procedure, refer to “4. Installation” of the Installation Manual supplied with the BKE-701. 1-12 (E) BVE-700... - Page 17 The material contained in this manual consists of information that is the property of Sony Corporation. Sony Corporation expressly prohibits the duplication of any portion of this manual or the use thereof for any purpose other than the operation or maintenance of the equipment described in this manual without the express written permission of Sony Corporation.
- Page 18 Printed in Japan Sony Corporation BVE-700 (SY) J, E 2000. 8 16 Communication System Solutions Network Company 3-205-021-01 ©2000...