Quick Links
ACS150 and ACS350
MUL1-R1 Installation instructions
WARNING! Before installing MUL1-R1
option, read the safety instructions and
mechanical and electrical installation
instructions in the drive user's manual.
Follow the instructions when installing,
operating and servicing the drive. If
ignored, physical injury or death may
follow, or damage may occur to the
drive, motor or driven equipment.
3a
3. Install clamps (3a) for control cables (see power cable
lead-throughs), or if cables are run in conduits, replace all
clamps with suitable glands (not included). Run cables
through the clamps and tighten. Strip cable ends. Fasten
the grounding conductor (PE) of the input power cable and
the twisted shield of motor cable under the grounding
clamps (3b). Connect the conductors to appropriate
terminals. See Electrical installation in the drive manual.
1. Fasten the gland box frame to drive with two M4×12
screws.
3b
4. With FPBA-01 or FCAN-01 option modules, remove the
detachable lid (4) from the gland box cover.
© 2006 ABB Oy. All Rights Reserved.
1
2. Fasten the gland box frame to wall with four M4 screws
(not included).
7
6
4
5, 6, 7. With any fieldbus option module except FRSA-00,
remove the support plate (5), install the I/O clamping plate
(6) and the option grounding plate (7) to the gland box
frame. See Mechanical installation in the drive manual.
2
5
3AFE68642868 Rev. D / 03.03.2006
Related Manuals for ABB MUL1-R1
Summary of Contents for ABB MUL1-R1
- Page 1 (3b). Connect the conductors to appropriate detachable lid (4) from the gland box cover. frame. See Mechanical installation in the drive manual. terminals. See Electrical installation in the drive manual. © 2006 ABB Oy. All Rights Reserved. 3AFE68642868 Rev. D / 03.03.2006...
- Page 2 9. Fasten the cover with two M4×12 screws. 13. ACS350 and ACS150 drives with MUL1-R1 option installed. ABB Oy AC Drives P.O. Box 184 FIN-00381 HELSINKI FINLAND Tel. +358 10 22 11, Fax: +358 10 22 22681, Internet: http://www.abb.com...
- Page 3 13. Frequenzumrichter ACS350 und ACS150 mit installierter Option MUL1-R1. VAROITUS! Ennen MUL1-R1-lisävarusteen asentamista on tutustuttava ATTENTION ! Avant d’installer l’option MUL1-R1, vous devez lire les consignes de taajuusmuuttajan käyttöoppaassa annettuihin turvaohjeisiin sekä mekaanista sécurité ainsi que les instructions de montage et de raccordement du manuel de asennusta ja sähköliitäntöjä...
- Page 4 AVVERTENZA! Prima di installare l’opzione MUL1-R1, leggere le istruzioni per WAARSCHUWING! Lees, vóór het installeren van de MUL1-R1 optie, de AVISO! Antes de instalar a opção MUL1-R1, leia as instruções de segurança e as l’installazione meccanica ed elettrica e le norme di sicurezza contenute nel veiligheidsvoorschriften en de mechanische en elektrische installatievoorschriften instruções de instalação eléctricas e mecânicas no manual do utilizador.