ABB ACS310 Installation Instructions
Hide thumbs
Also See for ACS310:
- User manual (376 pages) ,
- Quick start manual (48 pages) ,
- User's manual and safety manual (40 pages)
Quick Links
ACS310, ACS320, ACS350 and ACS355
MUL1-R4 Installation Instructions
WARNING! Before installing MUL1-R4
option, read the safety instructions and
mechanical and electrical installation
instructions in the drive User's Manual.
Follow the instructions when installing,
operating and servicing the drive. If
ignored, physical injury or death may
follow, or damage may occur to the
drive, motor or driven equipment.
Note: You cannot lead the Safe torque off (STO) cable
through the gland plate in the ACS355.
3. If control cables or fieldbus option modules will be installed,
remove the detachable lid (3) from the gland box cover.
M4×8
1. Fasten the gland box frame to drive with two M4×16 screws
and one M4x8 screw. Note: The M4×8 screw is already
installed in the drive.
3
4. With any fieldbus option module except FRSA-00, install the
option grounding plate to the gland box frame. See Mechanical
installation in the drive manual.
© 2010 ABB Oy. All Rights Reserved.
1
1
2. Fasten the gland box frame to wall with four M4 screws (not
included).
4
5b
5. Install the clamp (5a) for the control cable, or if cables are run
in conduits, replace all clamps with suitable glands (not
included). Run cables through the clamps and tighten. Strip
cable ends. Fasten the grounding conductor (PE) of the input
g
power cable and the twisted shield of motor cable under the
grounding clamps (5b). Connect the conductors to appropriate
terminals. See Electrical installation in the drive manual.
3AUA0000025916 Rev. C / 2010-01-25
2
5a
g
(
)
p
Related Manuals for ABB ACS310
Summary of Contents for ABB ACS310
- Page 1 See Mechanical remove the detachable lid (3) from the gland box cover. installation in the drive manual. terminals. See Electrical installation in the drive manual. © 2010 ABB Oy. All Rights Reserved. 3AUA0000025916 Rev. C / 2010-01-25...
- Page 2 10. Fasten the hood to drive with two M3×12 screws. 11. Fasten the hood to wall with one M4 screw (not included). 12. Drive with MUL1-R4 option installed. ABB Oy Drives P.O. Box 184 FIN-00381 HELSINKI FINLAND Tel. +358 10 22 11, Fax: +358 10 22 22681, Internet: www.abb.com...
- Page 3 ADVARSEL! Før MUL1-R4 optionen installeres, læses sikkerhedsinstruktionerne WARNUNG! Lesen Sie vor der Installation der optionalen Kabelanschlusseinheit mit ADVERTENCIA Antes de instalar la opción MUL1-R4, lea las instrucciones de og de mekaniske og elektriske anvisninger i drevets Brugermanual. Følg disse Kabelverschraubungen MUL1-R4 die Sicherheitsvorschriften und Anweisungen zur seguridad, así...
- Page 4 AVVERTENZA! Prima di installare l’opzione MUL1-R4, leggere le istruzioni per WAARSCHUWING! Lees, vóór het installeren van de MUL1-R4 optie, de AVISO! Antes de instalar a opção MUL1-R4, leia as instruções de segurança e as l’installazione meccanica ed elettrica e le norme di sicurezza contenute nel Manuale veiligheidsvoorschriften en de mechanische en elektrische installatievoorschriften in de instruções de instalação mecânica e eléctrica no Manual do Utilizador do utente del convertitore di frequenza.