Table of Contents
Number of LDAP servers
User name and password to
be registered on the LDAP
server
LDAP protocol
TLS communication method StartTLS
Binding to an LDAP server
Notes:
1
To use LDAP authentication in LPAR manager, uidNumber must be set for each
.
Active Directory user.
However, in LPAR manager firmware version 02-45 or later, uidNumber does not
need to be set.
For information on how to set up Active Directory, see the Hitachi Compute
Blade 500 Series Management Module Setup Guide.
When referring to this document, note the following:
•
Substitute any instances of "management module" in the text with the
phrase "LPAR manager" when reading this document.
•
To be in accordance with the user name and password specification of the
LPAR manager and the LDAP server.
•
Note that LPAR manager does not use any groups that can log in to
management modules.
LDAP authentication settings
To set LDAP authentication, perform the following operations:
Edit LDAP settings
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Item
Maximum of three LDAP servers (LDAP servers will be
accessed in the order of LDAP server 1, LDAP server 2, and
LDAP server 3. Authentication will be performed by using
the server that responds earlier than the other servers.)
The following are the requirements for user names and
passwords to be used for LPAR manager authentication:
•
The user name must be 1 to 31 characters, and can
contain alphanumeric characters, periods (.), hyphens
(-), and underscores (_). The user name must begin
with a letter.
•
The password must be 1 to 31 characters, and can
contain alphanumeric characters and symbols other
than spaces.
If there are any conditions on user names and passwords
that are specific to the LDAP server, and confirm to specific
those.
LDAPv3
Anonymous binding or simple authentication via TLS
Table 3-28 Web console
Item
Resources > Modules > All Modules > Server Blades >
Server Blades x > LPAR > Edit > Edit LDAP settings
High Reliability Functions
Scope of support
Operation
3-25
- Quick Links:
- Configuration of Memory
Hide quick links:
Table of Contents
