Home Auto Manual large NEWEST
A Quick Note before You Set Up the KEY CHAIN REMOTE:
The KEY CHAIN REMOTE is very convenient for switching on entrance lights while approaching your home. It lets you turn on and off the
Receivers that are set to UNIT CODE 1 (RED) and MOOD 1 on your INDOOR REMOTE and activate all Receivers (same as the House button
on the INDOOR REMOTE).
Step by step instructions to set up the KEY CHAIN REMOTE
Step 1:
Set the MESSENGER HUB slide switch to LEARN.
Step 2:
While facing the MESSENGER HUB, press and hold the top ON button on the KEY CHAIN REMOTE.
The green light on the MESSENGER HUB flashes to indicate that the MESSENGER HUB now
recognizes the KEY CHAIN REMOTE.
Step 3:
Set the slide switch on the MESSENGER HUB to RUN.
The KEY CHAIN REMOTE is now ready for use.
The top ON and OFF buttons will activate any Receivers set to UNIT CODE 1 (RED). For convenience we recommend that your entrance
lights be controlled by UNIT CODE 1 (RED).
The middle ON and OFF (MOOD 1) buttons of the KEY CHAIN REMOTE will activate all Receivers programmed on the MOOD 1 setting on
your INDOOR REMOTE. NOTE: You must have already programmed the MOOD 1 setting on your INDOOR REMOTE for this function of the
KEY CHAIN REMOTE to operate.
The bottom ON and OFF buttons of the KEY CHAIN REMOTE perform the same function as the House button on the INDOOR REMOTE.
Pressing the ON and OFF buttons will activate the MESSENGER HUB and all the LAMP RECEIVERs / BULB RECEIVERs set to the system's
HOUSE CODE.
KEY CHAIN REMOTE BATTERY REPLACEMENT
To change the battery, pry the two halves apart and fit two CR2016 Lithium 3V batteries. Observe the polarity of the batteries. (Writing on back
of battery must face back cover of KEY CHAIN REMOTE.
4/24/03
3:40 PM
Page 9
9
20
Activates UNIT
CODE 1 (RED) only
Activates
MOOD 1 only
Activates all
On or all Off
