General Safety Rules; Fcc Caution - Black & Decker freewire Instruction Manual

Home automation starter kit
Hide thumbs Also See for freewire:
Home Auto Manual large NEWEST

General Safety Rules

WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious
personal injury.
CAUTION: To reduce the risk of electric shock, do not disassemble any parts. No user-serviceable parts are inside. If you spill liquid on a
unit, disconnect the unit from the AC outlet to prevent possible fire or shock hazard and consult authorized service personnel.
WARNING: To prevent electric shock hazard, do not expose any part to rain or moisture.
WARNING: Use only incandescent bulbs in lamps that are to be controlled by Lamp Receivers. Using any other type bulbs could damage
bulbs and or Lamp Receivers. Attempting to control any other device by the Lamp Receivers, may damage that device and may damage the
Lamp Receiver.

FCC Caution

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
This equipment generates and uses radio frequency energy, and if not installed and used properly, that is, in strict accordance with the
manufacturers instructions, it may cause interference to radio and television reception. It has been type tested and found to comply with the
limits for remote control devices in accordance with the specifications in Sub Parts B and C of Part 15 of FCC Rules, which are designed to
provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause interference to radio or television reception, which can be determined by unplugging the equipment, try
to correct the interference by one or more of the following measures.
• Reorient the antenna of the radio/TV experiencing the interference.
• Relocate the interference with respect to the radio/TV.
• Move the interference away from the radio/TV.
• Plug the interface into an outlet on a different electrical circuit from the radio/TV experiencing the interference.
• If necessary, consult your local Dealer for additional suggestions
NOTE: Modifications to any of the components in this kit will void the user's authority to operate this equipment.
4/24/03
3:40 PM
Page 2
SAVE THESE INSTRUCTIONS
2
loading