Quick Menu Mode - GE AF-600 FP Operating Instructions Manual
Fan and pump drive
460v/575v 150hp and above
Hide thumbs
Also See for AF-600 FP:
- Quick manual (260 pages) ,
- Operating instructions manual (176 pages) ,
- Design manual (176 pages)
Table of Contents
How to Program
6.1.2 Quick Menu Mode
Parameter Data
The keypad provides access to all parameters listed under
the Quick Menus. To set parameters using the [Quick
Menu] button - enter or change parameter data or settings
in accordance with the following procedure:
1.
Press Quick Menu button then press Quick Start
2.
Use the [
you want to change
3.
Press [OK]
4.
Use [
parameter setting
6
6
5.
Press [OK]
6.
To move to a different digit within a parameter
setting, use the [
7.
Highlighted area indicates digit selected for
change
8.
Press [Cancel] button to disregard change, or
press [OK] to accept change and enter the new
setting
Example of changing parameter data
Assume parameter F-07 Accel Time 1 is set to 6 seconds
and you want to change it to 10 seconds. Use the
following procedure:
1.
Press Quick Menu key
2.
Choose Quick Start
3.
Press [OK]
4.
With the [
5.
Press [OK]
6.
Use the arrow keys to change the 6.00 to 10.00.
7.
Press [OK]
The drive will now accelerate to rated speed in 10 seconds
instead of 6 seconds.
It is recommended to do the set-up in the order that the
parameters are listed!
Select [Parameter Data Check] to get information about:
•
The last 10 changes. Use the up/down navigation
keys to scroll between the last 10 changed
parameters.
•
The changes made since default setting.
76
▲
▼
] and [
] buttons to find the parameter
▲
▼
] and [
] buttons to select the correct
◀
▶
] and [
] buttons
▼
] button find par. F-07 Accel Time 1
AF-600 FP High Power Operating Instructions
Select [Trendings]:
to get information about the display line read-outs. The
information is shown as graphs.
Only display parameters selected in K-20 Display Line 1.1
Small and K-24 Display Line 3 Large can be viewed. It is
possible to store up to 120 samples in the memory for
later reference.
Efficient Parameter Set-up for AF-600 FP Applications:
The parameters can easily be set up for the vast majority
of the AF-600 FP applications only by using the [Quick
Setup] option.
After pressing [Quick Menu], the different choices in the
Quick Menu are listed.
Example of using the Quick Setup option:
NOTE
A complete description of the function is found in the
parameter sections of this manual.
Illustration 6.1 Quick Menu view.
The Quick Setup menu gives access to the most important
setup parameters of the frequency converter. After
programming the frequency converter will, in most cases,
be ready for operation. The Quick Setup parameters are
shown in the table below. A complete description of the
function is given in the parameter description sections of
this manual.
Hide quick links:
Table of Contents
