Summary of Contents for Bosch GEX Professional 150 AC
Page 1
Robert Bosch GmbH Power Tools Division 70745 Leinfelden-Echterdingen GEX Professional www.bosch-pt.com 125 A | 125 AC | 150 AC 2 609 932 594 (2007.08) O / 123 de Originalbetriebsanleitung el Πρωτότυπο οδηγιών χρήσης en Original instructions tr Orijinal işletme talimat...
Page 2
GEX 125 AC GEX 150 AC Professional 2 609 932 594 | (14.8.07) Bosch Power Tools...
Use of a cord suitable for out- safer at the rate for which it was designed. door use reduces the risk of electric shock. Bosch Power Tools 2 609 932 594 | (14.8.07)
Use the machine only for dry sanding. Pene- the graphics page for the machine and leave it tration of water into the machine increases open. the risk of an electric shock. 2 609 932 594 | (14.8.07) Bosch Power Tools...
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries, these values can vary. Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary. Bosch Power Tools 2 609 932 594 | (14.8.07)
EN 60745. Typically the A-weighted sound pressure level of the product is 75 dB(A). Uncertainty K=3 dB. The noise level when working can exceed 23.07.2007, Robert Bosch GmbH, Power Tools Division 80 dB(A). D-70745 Leinfelden-Echterdingen Wear hearing protection! Vibration total values (triax vector sum) deter-...
Page 8
– Hard sanding plate: Suitable for high sanding Note: When attaching the sanding plate, pay at- capacity on flat surfaces. tention that the toothing of the drive element en- gage into the openings of the sanding plate. Bosch Power Tools 2 609 932 594 | (14.8.07)
When vacuuming dry dust that is especially detri- 1 – 2 Low stroke rate mental to health or carcinogenic, use a special vacuum cleaner. 3 – 4 Medium stroke rate 5 – 6 High stroke rate 2 609 932 594 | (14.8.07) Bosch Power Tools...
Use only original Bosch sanding accessories. After longer periods of working at low stroke Rough Sanding rate, allow the machine to cool down by running it for approx.
North Orbital Road should be carried out by an after-sales service Denham centre for Bosch power tools. Uxbridge In all correspondence and spare parts order, UB 9 5HJ please always include the 10-digit article number Tel.
Page 12
Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an envi- ronmentally correct manner. Subject to change without notice. Bosch Power Tools 2 609 932 594 | (14.8.07)